[cyber] I: Sisyphus-20240525 x86_64 beehive_status: +12 -13 (195)
ALT beekeeper
hiver на altlinux.org
Сб Май 25 08:14:51 MSK 2024
12 NEW error logs
automake_1.11-1.11.6-alt10
checking for upc... no
configure: error: no Unified Parallel C compiler was found
+ exit_status=77
--
+ exit 77
1 of 878 tests failed
(73 tests were not run)
gawk-5.1.0.0.213.d04f-alt1
make[3]: Entering directory '/usr/src/RPM/BUILD/gawk-5.1.0.0.213.d04f-alt1/test'
1 TESTS FAILED
make[3]: *** [Makefile:5248: pass-fail] Error 1
libsmi-0.5.0-alt2
parser-sming.c:5401:18: error: 'yydefgoto' undeclared (first use in this function)
parser-sming.c:5397:15: warning: variable 'yylhs' set but not used
[-Wunused-but-set-variable]
parser-sming.c:5413:3: error: 'yytoken' undeclared (first use in this function)
parser-sming.c:5413:13: error: 'yychar' undeclared (first use in this function); did
you mean 'char'?
parser-sming.c:5413:23: error: 'YYEMPTY' undeclared (first use in this function)
parser-sming.c:5413:33: error: 'YYSYMBOL_YYEMPTY' undeclared (first use in this function)
parser-sming.c:5413:52: warning: implicit declaration of function 'YYTRANSLATE'
[-Wimplicit-function-declaration]
parser-sming.c:5415:8: error: 'yyerrstatus' undeclared (first use in this function)
parser-sming.c:72:25: error: 'smingnerrs' undeclared (first use in this function);
did you mean 'sminglex'?
72 | #define yynerrs smingnerrs
--
71 | extern void smiyyerror(char *msg, Parser *parserPtr);
parser-sming.c:5426:21: error: 'YYEOF' undeclared (first use in this function); did
you mean 'EOF'?
parser-sming.c:5430:13: error: 'YYABORT' undeclared (first use in this function)
parser-sming.c:5434:11: warning: implicit declaration of function 'yydestruct'
[-Wimplicit-function-declaration]
parser-sming.c:5435:33: error: 'yylval' undeclared (first use in this function)
parser-sming.c:5452:5: error: 'YYERROR' undeclared (first use in this function)
libvamp-2.10.0-alt2
ld: ./libvamp-hostsdk.a: error adding symbols: no more archived files
collect2: error: ld returned 1 exit status
make: *** [Makefile:271: rdf/generator/vamp-rdf-template-generator] Error 1
mailfromd-8.16-alt1
123: current_header ok
124: current_header(name,ind) FAILED (hdr-getn.at:20)
125: current_header(name,ind) - exception ok
--
## Test results. ##
ERROR: 121 tests were run,
1 failed unexpectedly.
openFPGALoader-0.12.1-alt1
doctree = pickle.loads(serialised)
_pickle.UnpicklingError: pickle data was truncated
The above exception was the direct cause of the following exception:
--
raise ExtensionError(__("Handler %r for event %r threw an exception") %
sphinx.errors.ExtensionError: Handler <bound method TocTreeCollector.get_updated_docs
of <sphinx.environment.collectors.toctree.TocTreeCollector object at 0x7f269ceb8230>>
for event 'env-get-updated' threw an exception (exception: pickle data was truncated)
Extension error (sphinx.environment.collectors.toctree):
--
doctree = pickle.loads(serialised)
_pickle.UnpicklingError: pickle data was truncated
The above exception was the direct cause of the following exception:
--
raise ExtensionError(__("Handler %r for event %r threw an exception") %
sphinx.errors.ExtensionError: Handler <bound method TocTreeCollector.get_updated_docs
of <sphinx.environment.collectors.toctree.TocTreeCollector object at 0x7fafb0cee030>>
for event 'env-get-updated' threw an exception (exception: pickle data was truncated)
Extension error (sphinx.environment.collectors.toctree):
openscad-2021.01-alt4.2
130 | fit != cdt.finite_faces_end(); fit++) {
src/cgalutils-tess.cc:130:65: error: 'fit' was not declared in this scope
src/cgalutils-tess.cc: In function 'bool CGALUtils::tessellatePolygon(const PolygonK&,
Polygons&, const CGAL::Type_equality_wrapper<CGAL::Cartesian_base_no_ref_count<double,
CGAL::Epick>, CGAL::Epick>::Vector_3*)':
src/cgalutils-tess.cc:174:17: error: 'Projection' was not declared in this scope;
did you mean 'project'?
174 | Projection actualProjection(normalvec);
| project
src/cgalutils-tess.cc:175:25: error: 'actualProjection' was not declared in this scope
175 | CDT cdt(actualProjection);
src/cgalutils-tess.cc:177:29: error: request for member 'insert_constraint' in 'cdt',
which is of non-class type 'CDT' {aka 'int'}
177 | cdt.insert_constraint(polygon[i],
polygon[(i+1)%polygon.size()]);
src/cgalutils-tess.cc:184:44: error: qualified-id in declaration before 'fit'
184 | CDT::Finite_faces_iterator fit;
src/cgalutils-tess.cc:185:22: error: 'fit' was not declared in this scope
185 | for (fit=cdt.finite_faces_begin(); fit!=cdt.finite_faces_end();
++fit) {
src/cgalutils-tess.cc:185:30: error: request for member 'finite_faces_begin' in 'cdt',
which is of non-class type 'CDT' {aka 'int'}
185 | for (fit=cdt.finite_faces_begin(); fit!=cdt.finite_faces_end();
++fit) {
src/cgalutils-tess.cc:185:61: error: request for member 'finite_faces_end' in 'cdt',
which is of non-class type 'CDT' {aka 'int'}
185 | for (fit=cdt.finite_faces_begin(); fit!=cdt.finite_faces_end();
++fit) {
src/cgalutils-tess.cc:189:60: error: request for member 'triangle' in 'cdt', which is
of non-class type 'CDT' {aka 'int'}
189 | K::Point_3 v = cdt.triangle(fit)[i];
python3-module-isal-1.6.1-alt1
> self.assertEqual(x1 + x2, datazip)
E AssertionError: b'x^\xed\xdd\xdfn\xdb\xc8\x1d\x86\xe1s]\xc5\xb7G>\xd1\x[13192
chars]\x95' != b'x^\xed\xdd\xcfn\xdb\xca\xdd\x87\xf1\xbd\xae\xe2\x9b\x[13837 chars]\x95'
tests/test_zlib_compliance.py:281: AssertionError
--
=========================== short test summary info ============================
FAILED tests/test_zlib_compliance.py::CompressObjectTestCase::test_pair - Ass...
============ 1 failed, 9434 passed, 6 skipped, 2 warnings in 17.96s ============
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', 'tests']' returned
non-zero exit status 1.
python3-module-pydantic-2.7.1-alt1
'Pydantic does not support mixing more than one of TypeVar bounds, constraints and
defaults'
E NotImplementedError: Pydantic does not support mixing more than one of
TypeVar bounds, constraints and defaults
pydantic/_internal/_generate_schema.py:1662: NotImplementedError
--
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest',
'-Wignore', '--ignore=tests/test_docs.py', '--benchmark-skip',
'--deselect=tests/test_validators.py::test_use_bare',
'--deselect=tests/test_validators.py::test_use_no_fields',
'--deselect=tests/test_validators.py::test_validator_bad_fields_throws_configerror',
'--deselect=tests/test_validators.py::test_assert_raises_validation_error']' returned
non-zero exit status 1.
python3-module-requests-unixsocket-0.3.0-alt2
sock.connect(sa)
E OSError: [Errno 101] Network is unreachable
The above exception was the direct cause of the following exception:
--
raise NewConnectionError(
E urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at
0x7fc7582323f0>: Failed to establish a new connection: [Errno 101] Network is unreachable
The above exception was the direct cause of the following exception:
--
sock.connect(sa)
OSError: [Errno 101] Network is unreachable
The above exception was the direct cause of the following exception:
--
raise NewConnectionError(
urllib3.exceptions.NewConnectionError: <urllib3.connection.HTTPConnection object at
0x7fc7582323f0>: Failed to establish a new connection: [Errno 101] Network is unreachable
The above exception was the direct cause of the following exception:
urllib3.exceptions.ProxyError: ('Unable to connect to proxy',
NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc7582323f0>:
Failed to establish a new connection: [Errno 101] Network is unreachable'))
The above exception was the direct cause of the following exception:
--
raise MaxRetryError(_pool, url, reason) from reason # type: ignore[arg-type]
E urllib3.exceptions.MaxRetryError: HTTPConnectionPool(host='10.10.1.10', port=1080):
Max retries exceeded with url: /path/to/page (Caused by ProxyError('Unable to connect to
proxy', NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc7582323f0>:
Failed to establish a new connection: [Errno 101] Network is unreachable')))
During handling of the above exception, another exception occurred:
--
raise ProxyError(e, request=request)
E requests.exceptions.ProxyError: HTTPConnectionPool(host='10.10.1.10', port=1080):
Max retries exceeded with url: /path/to/page (Caused by ProxyError('Unable to connect to
proxy', NewConnectionError('<urllib3.connection.HTTPConnection object at 0x7fc7582323f0>:
Failed to establish a new connection: [Errno 101] Network is unreachable')))
_____________________ test_unix_domain_adapter_monkeypatch _____________________
--
=========================== short test summary info ============================
FAILED requests_unixsocket/tests/test_requests_unixsocket.py::test_unix_domain_adapter_ok
FAILED
requests_unixsocket/tests/test_requests_unixsocket.py::test_unix_domain_adapter_url_with_query_params
FAILED
requests_unixsocket/tests/test_requests_unixsocket.py::test_unix_domain_adapter_connection_error
FAILED
requests_unixsocket/tests/test_requests_unixsocket.py::test_unix_domain_adapter_connection_proxies_error
shepherd-0.10.4-alt1
make[4]: Entering directory '/usr/src/RPM/BUILD/shepherd-0.10.4'
FAIL: tests/system-star.sh
make[4]: Leaving directory '/usr/src/RPM/BUILD/shepherd-0.10.4'
--
# SKIP: 0
# XFAIL: 0
# FAIL: 1
# XPASS: 0
# ERROR: 0
See ./test-suite.log
watchexec-1.22.3-alt1
test folders ... ok
test scopes ... FAILED
test globs ... ok
--
scopes
test result: FAILED. 5 passed; 1 failed; 0 ignored; 0 measured; 0 filtered out; finished
in 0.00s
error: test failed, to rerun pass `-p watchexec-filterer-ignore --test filtering`
13 error logs REMOVED from the list
bcachefs-tools-1.4.1-alt1
dopewars-1.5.12-alt2_20.1033svn
perl-Tie-DBI-1.08-alt1
power-profiles-daemon-0.21-alt1
python3-module-asyncpg-0.29.0-alt2
python3-module-mdp-3.6.0.15.g64f14eee-alt3
python3-module-requests-2.31.0-alt1
qemu-8.2.3-alt1
qt5-webengine-5.15.16-alt4
share-preview-0.5.0-alt1
smcroute-2.5.7-alt1
tarantool-3.0.1-alt1
v4l-utils-1.26.1-alt1
Total 195 error logs.
Подробная информация о списке рассылки Sisyphus-cybertalk