[cyber] I: p9-20220227 x86_64 beehive_status: +8 -9 (241)

[ALT beekeeper]

	8 NEW error logs

aqbanking-6.2.5-alt1
	make[5]: Entering directory
	'/usr/src/RPM/BUILD/aqbanking-6.2.5/src/libs/plugins/backends/aqebics'
	make[5]: *** No rule to make target 'built_sources'.  Stop.
	make[5]: Leaving directory
	'/usr/src/RPM/BUILD/aqbanking-6.2.5/src/libs/plugins/backends/aqebics'
	--
	make[5]: Entering directory
	'/usr/src/RPM/BUILD/aqbanking-6.2.5/src/libs/aqbanking/backendsupport'
	make[5]: *** No rule to make target 'jobqueue.c', needed by 'jobqueue.lo'.  Stop.
	make[5]: Leaving directory
	'/usr/src/RPM/BUILD/aqbanking-6.2.5/src/libs/aqbanking/backendsupport'

automake_1.11-1.11.6-alt9
	checking for upc... no
	configure: error: no Unified Parallel C compiler was found
	+ exit_status=77
	--
	+ exit 77
	2 of 893 tests failed
	(58 tests were not run)

fleet-commander-admin-0.15.1-alt4.M90P.1
	# SKIP:  0
	# XFAIL: 0
	# FAIL:  1
	# XPASS: 0
	# ERROR: 0
	See tests/test-suite.log
	--
	# SKIP:  0
	# XFAIL: 0
	# FAIL:  1
	# XPASS: 0
	# ERROR: 0
	.. contents:: :depth: 2
	FAIL: test_logger_dconf.sh
	test_01_write_key_for_known_schema (__main__.TestDconfLogger)
	... DEBUG:fleet_commander_logger.py:Constructing GSettingsLogger
	--
	DEBUG:_logger_test_suite.py:Signal registered. Calling 'ChangeLibreOffice' dbus
	method. Args: []
	ERROR:_logger_test_suite.py:Timed out waiting for DBus call. Test probably failed
	ERROR
	test_06_libreoffice_create_dconfwrite (__main__.TestDconfLogger)
	... DEBUG:fleet_commander_logger.py:Constructing GSettingsLogger
	--
	ok
	ERROR: test_05_libreoffice_write_key (__main__.TestDconfLogger)
	Traceback (most recent call last):

ipsec-tools-0.8.2-alt3
	checking if iconv second argument needs const... yes
	checking if -liconv is required... configure: error: cannot use iconv

libompl-1.3.2-alt1_6
	Start 16: test_2dcircles_opt_geometric
	hasher-priv: master: idle time limit (3600 seconds) exceeded

neko-2.2.0-alt4.gitb68336c
	make[1]: Entering directory '/usr/src/RPM/BUILD/neko-2.2.0'
	[ 97%] Built target nekotools
	make[1]: Leaving directory '/usr/src/RPM/BUILD/neko-2.2.0'
	make[2]: Entering directory '/usr/src/RPM/BUILD/neko-2.2.0'
	[ 88%] Generating bin/nekoml.std
	make[2]: Leaving directory '/usr/src/RPM/BUILD/neko-2.2.0'
	make[1]: Entering directory '/usr/src/RPM/BUILD/neko-2.2.0'
	[ 97%] Built target nekoml.std
	make[1]: Leaving directory '/usr/src/RPM/BUILD/neko-2.2.0'
	make: *** [Makefile:163: all] Error 2

python-module-pycodestyle-2.5.0-alt1
	removing 'build/bdist.linux-x86_64/egg' (and everything under it)
	error: [Errno 2] No such file or directory: 'build/bdist.linux-x86_64/egg'
	creating
	/usr/src/RPM/BUILD/python-module-pycodestyle-2.5.0/.tox/py37/lib/python3/site-packages/pycodestyle-2.5.0-py3.7.egg
	Extracting pycodestyle-2.5.0-py3.7.egg to
	/usr/src/RPM/BUILD/python-module-pycodestyle-2.5.0/.tox/py37/lib/python3/site-packages
	ERROR: InvocationError for command
	/usr/src/RPM/BUILD/python-module-pycodestyle-2.5.0/.tox/py27/bin/python setup.py install
	(exited with code 1)
	Adding pycodestyle 2.5.0 to easy-install.pth file
	--
	Finished processing dependencies for pycodestyle==2.5.0
	ERROR: invocation failed (exit code 1)
	Б°√ FAIL py27 in 3.2 seconds
	--
	___________________________________ summary ____________________________________
	ERROR:	 py27: parallel child exit code 1
	py37: commands succeeded

sgc-0.2.1-alt3
	+ xvfb-run sh makedocs
	_XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created.
	The XKEYBOARD keymap compiler (xkbcomp) reports:
	--
	pygame.display.init()
	error: Couldn't open X11 display
	The full traceback has been saved in /usr/src/tmp/sphinx-err-sj2nPX.log, if you want
	to report the issue to the developers.

	9 error logs REMOVED from the list
SNNS-4.3-alt1.1.1.1
dietlibc-0.33-alt3
libsmi-0.5.0-alt1.svn1841
litmus-0.14.0-alt1.git.9fbc73d
proftpd-1.3.6-alt0.4.ga73dbfe3b
python-module-pebble-4.3.7-alt1.git20180228
quilt-0.66-alt1
sbcl-1.4.12-alt3
testng-0:6.14.3-alt1_2jpp8

Total 241 error logs.