[cyber] I: Sisyphus-20210728 x86_64 beehive_status: +43 -7 (77)
ALT beekeeper
hiver на altlinux.org
Ср Июл 28 09:58:49 MSK 2021
43 NEW error logs
apache-commons-pool2-2.4.2-alt4_7jpp8
[ERROR] org.apache.commons.pool2.TestPoolUtils.testCheckMinIdleKeyedObjectPoolKeys
Time elapsed: 1.166 s <<< FAILURE!
java.lang.AssertionError: expected:<[getNumIdle, addObject, getNumIdle, addObject,
getNumIdle, addObject, getNumIdle, addObject, getNumIdle, addObject, getNumIdle,
addObject, getNumIdle, addObject, getNumIdle, addObject]> but was:<[getNumIdle,
addObject, getNumIdle, addObject, getNumIdle, addObject, getNumIdle, addObject,
getNumIdle, addObject, getNumIdle, addObject]>
at
org.apache.commons.pool2.TestPoolUtils.testCheckMinIdleKeyedObjectPoolKeys(TestPoolUtils.java:284)
--
[ERROR] org.apache.commons.pool2.impl.TestGenericObjectPool.testBorrowObjectFairness
Time elapsed: 4.021 s <<< FAILURE!
java.lang.AssertionError: Thread 21 failed: java.lang.Throwable: Expected: 21 found: 22
at
org.apache.commons.pool2.impl.TestGenericObjectPool.testBorrowObjectFairness(TestGenericObjectPool.java:2037)
autofs-5.1.7-alt2
<13>Jul 28 06:08:07 rpmi: control-sshd-permit-root-login-0.0.1-alt1 sisyphus+254585.100.1.1
1594057999 installed
grep: /etc/openssh/sshd_config: No such file or directory
sed: cannot stat /etc/openssh/sshd_config: No such file or directory
error: %post(control-sshd-permit-root-login-0.0.1-alt1.noarch) scriptlet failed, exit
status 1
error: control-sshd-permit-root-login-0.0.1-alt1.noarch: install failed
<86>Jul 28 06:08:07 groupadd[2871815]: group added to /etc/group: name=remote, GID=498
--
<13>Jul 28 06:08:08 rpmi: flex-2.6.4.0.88.9801-alt1 sisyphus+275295.100.2.3 1624485314
installed
hsh-install: Packages installation failed.
bcc-0.19.0-alt1.1
In file included from map_helpers.c:7:
./map_helpers.h:6:10: fatal error: 'bpf/bpf.h' file not found
#include <bpf/bpf.h>
cockpit-247-alt1
<13>Jul 28 05:12:34 rpmi: iputils-20210722-alt1 sisyphus+281147.100.1.1 1627396204
installed
sysctl: cannot stat /proc/sys/net/ipv4/ping_group_range: No such file or directory
<13>Jul 28 05:12:34 rpmi: iproute2-5.13.0-alt1 sisyphus+278100.2400.1.1 1626058596
installed
--
<13>Jul 28 05:12:36 rpmi: samba-dc-4.14.6-alt1 sisyphus+279733.100.2.3 1626678230 installed
error reading information on service samba: No such file or directory
<13>Jul 28 05:12:36 rpmi: samba-dc-common-4.14.6-alt1 sisyphus+279733.100.2.3 1626678230
installed
--
<13>Jul 28 05:12:36 rpmi: pcp-5.2.0-alt1 sisyphus+274516.22100.2.2 1623720632 installed
pcp.env: Fatal Error: "/etc/pcp.conf" not found
error: %post(pcp-5.2.0-alt1.x86_64) scriptlet failed, exit status 1
error: pcp-5.2.0-alt1.x86_64: install failed
<13>Jul 28 05:12:36 rpmi: pcp-conf-5.2.0-alt1 sisyphus+274516.22100.2.2 1623720632
installed
--
<13>Jul 28 05:12:36 rpmi: libsystemd-devel-1:249.1-alt2 sisyphus+279897.200.2.1
1626880634 installed
hsh-install: Packages installation failed.
fleet-commander-admin-0.15.1-alt8
FAIL: test_logger_dconf.sh
test_01_write_key_for_known_schema (__main__.TestDconfLogger)
... DEBUG:fleet_commander_logger.py:Constructing GSettingsLogger
--
DEBUG:_logger_test_suite.py:Signal registered. Calling 'Change' dbus method. Args: [[]]
ERROR:_logger_test_suite.py:Timed out waiting for DBus call. Test probably failed
ERROR
test_02_write_key_for_unknown_schema (__main__.TestDconfLogger)
... DEBUG:fleet_commander_logger.py:Constructing GSettingsLogger
--
ok
ERROR: test_01_write_key_for_known_schema (__main__.TestDconfLogger)
Traceback (most recent call last):
--
return self.log.pop(0)
IndexError: pop from empty list
Ran 9 tests in 3.250s
FAILED (errors=1)
dbus.Array([dbus.String('org.freedesktop.DBus'), dbus.String(':1.3'),
dbus.String('org.freedesktop.ScreenSaver'), dbus.String('ca.desrt.dconf'),
dbus.String(':1.1'), dbus.String(':1.2')], signature=dbus.Signature('s'))
fprintd-1.92.0-alt1
Full log written to
/usr/src/RPM/BUILD/fprintd-1.92.0/x86_64-alt-linux/meson-logs/testlog.txt
FAILED: meson-test
/usr/bin/meson test --no-rebuild --print-errorlogs
freeipa-4.8.9-alt5
skipping line: 1
hsh-install: Packages installation failed.
freeipa-healthcheck-0.9-alt1
<13>Jul 28 06:46:04 rpmi: certmonger-0.79.14-alt1 sisyphus+279698.100.1.2 1626667117
installed
error reading information on service certmonger: No such file or directory
<13>Jul 28 06:46:04 rpmi: libsss_sudo-2.4.2-alt2 sisyphus+279453.100.1.1 1626546941
installed
--
skipping line: 1
hsh-install: Packages installation failed.
gawk-5.1.0.0.213.d04f-alt1
make[3]: Entering directory '/usr/src/RPM/BUILD/gawk-5.1.0.0.213.d04f-alt1/test'
1 TESTS FAILED
make[3]: *** [Makefile:5248: pass-fail] Error 1
ghostscript-9.53.3-alt1
<13>Jul 28 04:58:23 rpmi: jadetex-3.13-alt4_13 sisyphus+276995.100.1.2 1625342905 installed
error: %post(jadetex-3.13-alt4_13.noarch) scriptlet failed, exit status 2
error: jadetex-3.13-alt4_13.noarch: install failed
<13>Jul 28 04:58:23 rpmi: docbook-utils-print-0.6.14-alt5 sisyphus+278165.100.1.1
1626069743 installed
--
<13>Jul 28 04:58:24 rpmi: glibc-devel-static-6:2.32-alt4 sisyphus+279759.100.5.1
1626715219 installed
hsh-install: Packages installation failed.
hyena-0.5-alt3
Import process completed.
hsh-install: Packages installation failed.
java-1.7.0-openjdk-0:1.7.0.221-alt4_2.6.18.0jpp8
<13>Jul 28 03:01:25 rpmi: java-1.7.0-openjdk-headless-0:1.7.0.221-alt4_2.6.18.0jpp8
sisyphus+264271.100.1.1 1609537231 installed
error: %post(java-1.7.0-openjdk-headless-0:1.7.0.221-alt4_2.6.18.0jpp8.x86_64) scriptlet
failed, exit status 1
error: java-1.7.0-openjdk-headless-0:1.7.0.221-alt4_2.6.18.0jpp8.x86_64: install failed
<13>Jul 28 03:01:27 rpmi: libpolkit-0.119-alt1 sisyphus+273570.100.1.1 1622791439 installed
--
<13>Jul 28 03:01:31 rpmi: libattr-devel-2.5.1-alt1 sisyphus+279621.100.1.1 1626626968
installed
hsh-install: Packages installation failed.
keepass-2.48.1-alt1
Import process completed.
hsh-install: Packages installation failed.
kf5-kauth-5.84.0-alt1
W: You may want to run apt-get update to correct these problems
E: Couldn't find package python-module-PyQt5-devel
hsh-install: Failed to calculate package file list.
kf5-kcodecs-5.84.0-alt1
W: You may want to run apt-get update to correct these problems
E: Couldn't find package python-module-PyQt5-devel
hsh-install: Failed to calculate package file list.
kf5-kcompletion-5.84.0-alt1
W: You may want to run apt-get update to correct these problems
E: Couldn't find package python-module-PyQt5-devel
hsh-install: Failed to calculate package file list.
kf5-ki18n-5.84.0-alt1
W: You may want to run apt-get update to correct these problems
E: Couldn't find package python-module-PyQt5-devel
hsh-install: Failed to calculate package file list.
libdbi-drivers-1:0.9.0-alt6
<13>Jul 28 06:19:08 rpmi: jadetex-3.13-alt4_13 sisyphus+276995.100.1.2 1625342905 installed
error: %post(jadetex-3.13-alt4_13.noarch) scriptlet failed, exit status 2
error: jadetex-3.13-alt4_13.noarch: install failed
<13>Jul 28 06:19:08 rpmi: libmysqlclient21-devel-8.0.25-alt2 sisyphus+277698.40.3.1
1627313239 installed
--
<13>Jul 28 06:19:08 rpmi: zlib-devel-1.2.11-alt1 sisyphus+278099.4700.1.1 1626031564
installed
hsh-install: Packages installation failed.
libgnome-sharp-2.24.2-alt7
Import process completed.
hsh-install: Packages installation failed.
libgtk-sharp2-2.12.45-alt1
Import process completed.
hsh-install: Packages installation failed.
libkcapi-1.2.0-alt1
<13>Jul 28 05:36:02 rpmi: jadetex-3.13-alt4_13 sisyphus+276995.100.1.2 1625342905 installed
error: %post(jadetex-3.13-alt4_13.noarch) scriptlet failed, exit status 2
error: jadetex-3.13-alt4_13.noarch: install failed
<13>Jul 28 05:36:02 rpmi: login-0.60-alt36 sisyphus+278100.100.1.1 1626056541 installed
--
<13>Jul 28 05:36:03 rpmi: hardlink-2.36.1-alt2 sisyphus+278158.1600.1.1 1626051098
installed
hsh-install: Packages installation failed.
liburing-2.0-alt1
Test skipped
Running test statx
Test skipped
Running test sq-full-cpp
Tests skipped: <35fa71a030ca-test> <500f9fbadef8-test> <accept> <accept-link>
<across-fork> <connect> <cq-overflow> <defer> <double-poll-crash> <eeed8b54e0df-test>
<file-update> <io-cancel> <io_uring_enter> <io_uring_register> <iopoll> <lfs-openat>
<lfs-openat-write> <link> <link-timeout> <link_drain> <open-close> <openat2> <pipe-eof>
<poll> <poll-cancel> <poll-cancel-ton> <poll-link> <read-write> <self> <sigfd-deadlock>
<socket-rw> <sq-poll-dup> <sq-poll-share> <sq-space_left> <thread-exit> <timeout>
<timeout-new> <sendmsg_fs_cve> <statx>
Tests failed: <fadvise>
make[1]: *** [Makefile:280: runtests] Error 1
make[1]: Leaving directory '/usr/src/RPM/BUILD/liburing-2.0/test'
make: *** [Makefile:23: runtests] Error 2
make: Leaving directory '/usr/src/RPM/BUILD/liburing-2.0'
libwebkitgtk2-2.4.11-alt13
libtool: compile: x86_64-alt-linux-g++ -DHAVE_CONFIG_H -I. -DBUILDING_WebCore
-DBUILDING_WEBKIT -Wall -W -Wcast-align -Wchar-subscripts -Wreturn-type
-Wformat -Wformat-security -Wno-format-y2k -Wundef -Wmissing-format-attribute
-Wpointer-arith -Wwrite-strings -Wno-unused-parameter -Wno-parentheses
-fno-exceptions -DBUILDING_CAIRO__ -DBUILDING_GTK__ -I./Source/ThirdParty/ANGLE/src
-I./Source/ThirdParty/ANGLE/include -I./Source/ThirdParty/ANGLE/include/GLSLANG
-I./Source/ThirdParty/ANGLE/include/KHR -I./DerivedSources/Platform
-DWEBKITGTK_API_VERSION_STRING=\"1.0\" -DDATA_DIR=\"/usr/share\"
-I./Source/ThirdParty/ANGLE/src -I./Source/ThirdParty/ANGLE/include
-I./Source/ThirdParty/ANGLE/include/GLSLANG -I./Source/ThirdParty/ANGLE/include/KHR
-I./Source/WebCore -I./Source/WebCore/Modules/battery -I./Source/WebCore/Modules/gamepad
-I./Source/WebCore/Modules/geolocation -I./Source/WebCore/Modules/indexeddb
-I./Source/WebCore/Modules/indexeddb/leveldb -I./Source/WebCore/Modules/indieui
-I./Source/WebCore/Modules/mediasource -I./Source/WebCore/Modules/mediastream
-I./Source/WebCore/Modules/navigatorcontentutils -I./Source/WebCore/Modules/notifications
-I./Source/WebCore/Modules/plugins -I./Source/WebCore/Modules/proximity
-I./Source/WebCore/Modules/quota -I./Source/WebCore/Modules/webaudio
-I./Source/WebCore/Modules/webdatabase -I./Source/WebCore/Modules/websockets
-I./Source/WebCore/accessibility -I./Source/WebCore/bindings
-I./Source/WebCore/bindings/generic -I./Source/WebCore/bindings/js
-I./Source/WebCore/bridge -I./Source/WebCore/bridge/c -I./Source/WebCore/bridge/jsc
-I./Source/WebCore/crypto -I./Source/WebCore/crypto/keys -I./Source/WebCore/css
-I./Source/WebCore/cssjit -I./Source/WebCore/dom -I./Source/WebCore/dom/default
-I./Source/WebCore/editing -I./Source/WebCore/fileapi -I./Source/WebCore/history
-I./Source/WebCore/html -I./Source/WebCore/html/canvas -I./Source/WebCore/html/forms
-I./Source/WebCore/html/parser -I./Source/WebCore/html/shadow -I./Source/WebCore/html/track
-I./Source/WebCore/inspector -I./Source/WebCore/loader -I./Source/WebCore/loader/appcache
-I./Source/WebCore/loader/archive -I./Source/WebCore/loader/archive/mhtml
-I./Source/WebCore/loader/cache -I./Source/WebCore/loader/icon
-I./Source/WebCore/mathml -I./Source/WebCore/page -I./Source/WebCore/page/animation
-I./Source/WebCore/page/scrolling -I./Source/WebCore/platform
-I./Source/WebCore/platform/animation -I./Source/WebCore/platform/audio
-I./Source/WebCore/platform/graphics -I./Source/WebCore/platform/graphics/cpu/arm
-I./Source/WebCore/platform/graphics/cpu/arm/filters/
-I./Source/WebCore/platform/graphics/filters
-I./Source/WebCore/platform/graphics/filters/texmap
-I./Source/WebCore/platform/graphics/freetype -I./Source/WebCore/platform/graphics/gpu
-I./Source/WebCore/platform/graphics/harfbuzz
-I./Source/WebCore/platform/graphics/harfbuzz/ng
-I./Source/WebCore/platform/graphics/opengl -I./Source/WebCore/platform/graphics/opentype
-I./Source/WebCore/platform/graphics/transforms -I./Source/WebCore/platform/image-decoders
-I./Source/WebCore/platform/image-decoders/bmp
-I./Source/WebCore/platform/image-decoders/gif
-I./Source/WebCore/platform/image-decoders/ico
-I./Source/WebCore/platform/image-decoders/jpeg
-I./Source/WebCore/platform/image-decoders/png
-I./Source/WebCore/platform/image-decoders/webp -I./Source/WebCore/platform/leveldb
-I./Source/WebCore/platform/linux -I./Source/WebCore/platform/mediastream
-I./Source/WebCore/platform/mediastream/gstreamer -I./Source/WebCore/platform/mock
-I./Source/WebCore/platform/mock/mediasource -I./Source/WebCore/platform/network
-I./Source/WebCore/platform/network/gtk -I./Source/WebCore/platform/sql
-I./Source/WebCore/platform/text -I./Source/WebCore/platform/text/icu
-I./Source/WebCore/platform/win -I./Source/WebCore/plugins -I./Source/WebCore/plugins/win
-I./Source/WebCore/rendering -I./Source/WebCore/rendering/line
-I./Source/WebCore/rendering/mathml -I./Source/WebCore/rendering/shapes
-I./Source/WebCore/rendering/style -I./Source/WebCore/rendering/svg
-I./Source/WebCore/storage -I./Source/WebCore/style
DerivedSources/WebCore/JSDOMWindow.cpp:177:10: fatal error: JSInternalSettingsGenerated.h:
No such file or directory
177 | #include "JSInternalSettingsGenerated.h"
lightdm-gtk-greeter-2.0.7-alt8
W: You may want to run apt-get update to correct these problems
E: Couldn't find package /usr/bin/exo-csource
hsh-install: Failed to calculate package file list.
linphone-3.12.0-alt7
<13>Jul 28 06:14:14 rpmi: jadetex-3.13-alt4_13 sisyphus+276995.100.1.2 1625342905 installed
error: %post(jadetex-3.13-alt4_13.noarch) scriptlet failed, exit status 2
error: jadetex-3.13-alt4_13.noarch: install failed
<13>Jul 28 06:14:14 rpmi: alsa-ucm-conf-1.2.5.1-alt1 sisyphus+274777.200.1.1 1624089157
installed
--
<13>Jul 28 06:14:16 rpmi: doxygen-1:1.8.17-alt2.1 sisyphus+279546.100.1.3 1626595404
installed
hsh-install: Packages installation failed.
mono-addins-1.3.3-alt2
Import process completed.
hsh-install: Packages installation failed.
monodevelop-1:5.10.0.871-alt1
Import process completed.
hsh-install: Packages installation failed.
newtonsoft-json-9.0.1-alt1
Import process completed.
hsh-install: Packages installation failed.
nqp-2017.09-alt1
from <unknown>:1 (src/vm/moar/stage0/nqp.moarvm:<entry>)
make: *** [Makefile:246: gen/moar/stage1/ModuleLoader.moarvm] Error 1
make: Leaving directory '/usr/src/RPM/BUILD/nqp-2017.09'
make: *** Waiting for unfinished jobs....
make: Entering directory '/usr/src/RPM/BUILD/nqp-2017.09'
perl -MExtUtils::Command -e mkpath gen/moar/stage1/gen
perl tools/build/gen-cat.pl moar src/how/Archetypes.nqp src/how/RoleToRoleApplier.nqp
src/how/NQPConcreteRoleHOW.nqp src/how/RoleToClassApplier.nqp src/how/NQPCurriedRoleHOW.nqp
src/how/NQPParametricRoleHOW.nqp src/how/NQPClassHOW.nqp src/how/NQPNativeHOW.nqp
src/how/NQPAttribute.nqp src/how/NQPModuleHOW.nqp src/how/EXPORTHOW.nqp >
gen/moar/stage1/nqpmo.nqp
/usr/bin/moar --libpath=src/vm/moar/stage0 src/vm/moar/stage0/nqp.moarvm --bootstrap
--setting=NULL --no-regex-lib --target=mbc \
--output=gen/moar/stage1/nqpmo.moarvm gen/moar/stage1/nqpmo.nqp
make: Leaving directory '/usr/src/RPM/BUILD/nqp-2017.09'
nuget-2.8.7-alt1
Import process completed.
hsh-install: Packages installation failed.
nunit2-2.6.4-alt1
Import process completed.
hsh-install: Packages installation failed.
parole-4.16.0-alt1
find-requires: running scripts
(cpp,debuginfo,files,gir-js,gir-python,gir,lib,pam,perl,pkgconfig,pkgconfiglib,python,python3,rpmlib,shebang,shell,static,symlinks,systemd-services,typelib)
/usr/src/tmp/parole-buildroot/usr/include/parole/parole.h:28:10: fatal error:
glib-object.h: No such file or directory
28 | #include <glib-object.h>
--
cpp.req: /usr/src/tmp/parole-buildroot/usr/include/parole/parole.h: cpp failed, trying
c++ mode
x86_64-alt-linux-cpp: fatal error: cannot execute 'cc1plus': execvp: No such file
or directory
compilation terminated.
cpp.req: WARNING: /usr/src/tmp/parole-buildroot/usr/include/parole/parole.h: cpp failed
/usr/src/tmp/parole-buildroot/usr/include/parole/parole-file.h:24:2: error: #error
"Only <parole.h> can be included directly."
24 | #error "Only <parole.h> can be included directly."
/usr/src/tmp/parole-buildroot/usr/include/parole/parole-file.h:30:10: fatal error:
glib-object.h: No such file or directory
30 | #include <glib-object.h>
--
cpp.req: WARNING: /usr/src/tmp/parole-buildroot/usr/include/parole/parole-file.h:
cpp failed
/usr/src/tmp/parole-buildroot/usr/include/parole/parole-debug.h:31:10: fatal error:
glib.h: No such file or directory
31 | #include <glib.h>
--
cpp.req: WARNING: /usr/src/tmp/parole-buildroot/usr/include/parole/parole-debug.h:
cpp failed
/usr/src/tmp/parole-buildroot/usr/include/parole/parole-stream.h:24:2: error: #error
"Only <parole.h> can be included directly."
24 | #error "Only <parole.h> can be included directly."
/usr/src/tmp/parole-buildroot/usr/include/parole/parole-stream.h:30:10: fatal error:
glib-object.h: No such file or directory
30 | #include <glib-object.h>
--
cpp.req: WARNING: /usr/src/tmp/parole-buildroot/usr/include/parole/parole-stream.h:
cpp failed
/usr/src/tmp/parole-buildroot/usr/include/parole/parole-filters.h:24:2: error: #error
"Only <parole.h> can be included directly."
24 | #error "Only <parole.h> can be included directly."
/usr/src/tmp/parole-buildroot/usr/include/parole/parole-filters.h:30:10: fatal error:
gtk/gtk.h: No such file or directory
30 | #include <gtk/gtk.h>
--
cpp.req: WARNING: /usr/src/tmp/parole-buildroot/usr/include/parole/parole-filters.h:
cpp failed
/usr/src/tmp/parole-buildroot/usr/include/parole/parole-pl-parser.h:24:2: error: #error
"Only <parole.h> can be included directly."
24 | #error "Only <parole.h> can be included directly."
pdfmod-0.9.1-alt10
Import process completed.
hsh-install: Packages installation failed.
pinta-1.7-alt1
Import process completed.
hsh-install: Packages installation failed.
pki-core-10.10.6-alt2
<13>Jul 28 04:51:03 rpmi: certmonger-0.79.14-alt1 sisyphus+279698.100.1.2 1626667117
installed
error reading information on service certmonger: No such file or directory
<13>Jul 28 04:51:03 rpmi: libsss_sudo-2.4.2-alt2 sisyphus+279453.100.1.1 1626546941
installed
--
<13>Jul 28 04:51:04 rpmi: freeipa-healthcheck-0.9-alt1 sisyphus+274749.100.2.1 1624353701
installed
error reading information on service ipa-healthcheck: No such file or directory
<13>Jul 28 04:51:04 rpmi: apache2-devel-1:2.4.48-alt3.1 sisyphus+279948.100.1.1
1626958396 installed
--
skipping line: 1
hsh-install: Packages installation failed.
procmail-3.22-alt11
_autotst.c:122:5: warning: ignoring return value of 'setegid' declared with attribute
'warn_unused_result' [-Wunused-result]
122 | { setegid(groups[i]);
_autotst.c:140:6: warning: ignoring return value of 'chown' declared with attribute
'warn_unused_result' [-Wunused-result]
140 | chown(argv[1],2,getegid());setuid(2); /* adjust the directory first */
_autotst.c:140:33: warning: ignoring return value of 'setuid' declared with attribute
'warn_unused_result' [-Wunused-result]
140 | chown(argv[1],2,getegid());setuid(2); /* adjust the directory first */
I suggest you take a look at the definition of LDFLAGS*
in the Makefile before you try make again.
make[1]: *** [Makefile:124: ../autoconf.h] Error 1
make: *** [Makefile:154: autoconf.h] Error 2
python-module-pysol_cards-0.10.1-alt1
W: You may want to run apt-get update to correct these problems
E: Package python-module-pbr has no installation candidate
hsh-install: Failed to calculate package file list.
python-module-sphinxcontrib-spelling-2.1.1-alt2.1.2
W: You may want to run apt-get update to correct these problems
E: Package python-module-pbr has no installation candidate
hsh-install: Failed to calculate package file list.
qscintilla2-2.11.5-alt3
W: You may want to run apt-get update to correct these problems
E: Couldn't find package python-module-PyQt5-devel
hsh-install: Failed to calculate package file list.
quilt-0.66-alt1
make: Leaving directory '/usr/src/RPM/BUILD/quilt-0.66-alt1'
make: Entering directory '/usr/src/RPM/BUILD/quilt-0.66-alt1'
[three.test]
66 commands (66 passed, 0 failed)
make: Leaving directory '/usr/src/RPM/BUILD/quilt-0.66-alt1'
make: Entering directory '/usr/src/RPM/BUILD/quilt-0.66-alt1'
[two.test]
57 commands (57 passed, 0 failed)
make: Leaving directory '/usr/src/RPM/BUILD/quilt-0.66-alt1'
make: Target 'check' not remade because of errors.
simpletest-11-alt5
rm *.gcno
rm: cannot remove '*.gcno': No such file or directory
make[2]: [Makefile:97: clean] Error 1 (ignored)
rm *.gcov
rm: cannot remove '*.gcov': No such file or directory
make[2]: [Makefile:98: clean] Error 1 (ignored)
rm gmon-*
rm: cannot remove 'gmon-*': No such file or directory
make[2]: [Makefile:99: clean] Error 1 (ignored)
rm *.gcda
rm: cannot remove '*.gcda': No such file or directory
make[2]: [Makefile:100: clean] Error 1 (ignored)
--
rm *.gcno
rm: cannot remove '*.gcno': No such file or directory
make[3]: [Makefile:97: clean] Error 1 (ignored)
rm *.gcov
rm: cannot remove '*.gcov': No such file or directory
make[3]: [Makefile:98: clean] Error 1 (ignored)
rm gmon-*
rm: cannot remove 'gmon-*': No such file or directory
make[3]: [Makefile:99: clean] Error 1 (ignored)
xorg-docs-1:1.7.1-alt1
<13>Jul 28 06:51:12 rpmi: jadetex-3.13-alt4_13 sisyphus+276995.100.1.2 1625342905 installed
error: %post(jadetex-3.13-alt4_13.noarch) scriptlet failed, exit status 2
error: jadetex-3.13-alt4_13.noarch: install failed
<13>Jul 28 06:51:12 rpmi: docbook-utils-print-0.6.14-alt5 sisyphus+278165.100.1.1
1626069743 installed
--
<13>Jul 28 06:51:12 rpmi: xorg-sgml-doctools-1.10-alt1 1331109847 installed
hsh-install: Packages installation failed.
xsp-4.7.1-alt1
Import process completed.
hsh-install: Packages installation failed.
7 error logs REMOVED from the list
comix-4.0.4-alt4
libsmi-0.5.0-alt2
mixxx-2.3.0-alt1.1
python-module-gst1.0-1.16.2-alt4
python-module-pbr-5.5.0-alt5
python-module-xlib-0.26-alt2
racket-7.3-alt2
Total 77 error logs.
Подробная информация о списке рассылки Sisyphus-cybertalk