[cyber] I: Sisyphus-20211225 i586 beehive_status: +13 -20 (124)

ALT beekeeper hiver на altlinux.org
Сб Дек 25 08:58:10 MSK 2021


	13 NEW error logs

OpenBoard-1.6.1-alt1
	ld: cannot find -lquazip5
	collect2: error: ld returned 1 exit status
	make[1]: *** [Makefile.Release:1337: build/linux/release/product/OpenBoard] Error 1

fprintd-1.94.1-alt1
	Full log written to /usr/src/RPM/BUILD/fprintd-1.94.1/i586-alt-linux/meson-logs/testlog.txt
	FAILED: meson-test
	/usr/bin/meson test --no-rebuild --print-errorlogs

ghc8.6.4-sha-1.6.4.4-alt1
	+ ./Setup makefile -f cabal-rpm.mk
	unrecognised command: makefile (try --help)
	+ ./Setup build
	Preprocessing library for SHA-1.6.4.4..
	Building library for SHA-1.6.4.4..
	[1 of 1] Compiling Data.Digest.Pure.SHA ( src/Data/Digest/Pure/SHA.hs,
	dist/build/Data/Digest/Pure/SHA.o )
	ghc: out of memory (requested 1048576 bytes)
	error: Bad exit status from /usr/src/tmp/rpm-tmp.49916 (%build)
	RPM build errors:
	File /usr/src/RPM/SOURCES/ghc8.6.4-sha-1.6.4.4-alt1.patch is smaller than 8 bytes

gimagereader-3.3.1-alt5.2
	-- Checking for module 'quazip'
	--   No package 'quazip' found
	CMake Warning (dev) at /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:438
	(message):

glibc-6:2.34.0.39.024a7-alt1
	UNSUPPORTED: misc/tst-adjtimex-time64
	FAIL: misc/tst-bz21269
	UNSUPPORTED: misc/tst-clock_adjtime
	--
	+ rc=2
	+ grep '^FAIL:' build-i586-linux/tests.sum
	+ cut '-d ' -f2-
	--
	==> build-i586-linux/misc/tst-bz21269.test-result <==
	FAIL: misc/tst-bz21269
	original exit status 1

newsboat-2.25-alt1
	test utils::tests::t_run_command_executes_given_command_with_given_argument has been
	running for over 60 seconds
	hasher-priv: master: idle time limit (3600 seconds) exceeded

qmapshack-1.15.2-alt1
	-- Checking for module 'quazip'
	--   No package 'quazip' found
	CMake Warning (dev) at /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:438
	(message):
	--
	-- Configuring done
	CMake Error: The following variables are used in this project, but they are set to
	NOTFOUND.
	Please set them or make sure they are set and tested correctly in the CMake files:

systemd-1:249.7-alt5
	Build type: native build
	meson.build:3:0: ERROR: Unknown options: "gnuefi"
	A full log can be found at
	/usr/src/RPM/BUILD/systemd-249.7/i586-alt-linux/meson-logs/meson-log.txt

texstudio-4.1.2-alt1
	ld: cannot find -lquazip5
	collect2: error: ld returned 1 exit status
	make: *** [Makefile:1048: texstudio] Error 1

trikStudio-2021.1-alt3
	g++ -Wl,--disable-new-dtags -Wl,--export-dynamic -Wl,-O1 -fuse-ld=gold -shared
	-Wl,-soname,libqrrepo.so.1 -o libqrrepo.so.1.0.0 .build/release/obj/repository.o
	.build/release/obj/folderCompressor.o .build/release/obj/repoApi.o
	.build/release/obj/serializer.o .build/release/obj/singleXmlSerializer.o
	.build/release/obj/valuesSerializer.o .build/release/obj/object.o
	.build/release/obj/logicalObject.o .build/release/obj/graphicalObject.o
	.build/release/obj/graphicalPart.o  -L/usr/src/RPM/BUILD/trikStudio-2021.1/bin/release
	-ltrikQsLog -lqrkernel -lqrutils -lquazip5 -lz /usr/lib/libQt5Gui.so /usr/lib/libQt5Xml.so
	/usr/lib/libQt5Core.so -lGL -lpthread
	/usr/bin/ld.gold: error: cannot find -lquazip5
	collect2: error: ld returned 1 exit status
	make[1]: *** [Makefile:127: ../bin/release/libqrrepo.so.1.0.0] Error 1

trikStudioJunior-2020.2-alt1
	g++ -Wl,--disable-new-dtags -Wl,--export-dynamic -Wl,-O1
	-fuse-ld=gold -shared -Wl,-soname,libqrrepo.so.1 -o libqrrepo.so.1.0.0
	.build/release/obj/repository.o .build/release/obj/folderCompressor.o
	.build/release/obj/repoApi.o .build/release/obj/serializer.o
	.build/release/obj/singleXmlSerializer.o .build/release/obj/valuesSerializer.o
	.build/release/obj/object.o .build/release/obj/logicalObject.o
	.build/release/obj/graphicalObject.o .build/release/obj/graphicalPart.o
	-L/usr/src/RPM/BUILD/trikStudioJunior-2020.2/bin/release -lqrkernel -lqrutils -lquazip5
	-lqslog -lz /usr/lib/libQt5Gui.so /usr/lib/libQt5Xml.so /usr/lib/libQt5Core.so -lGL
	-lpthread
	/usr/bin/ld.gold: error: cannot find -lquazip5
	collect2: error: ld returned 1 exit status
	make[1]: *** [Makefile:127: ../bin/release/libqrrepo.so.1.0.0] Error 1

tupitube-desk-0.2.18-alt1
	 * Compiling test...
	["make: Entering directory
	'/usr/src/RPM/BUILD/tupitube.desk-0.2.18/configure.tests/quazip'\n", "rm -f
	moc_predefs.h\n", "rm -f main.o\n", "rm -f *~ core *.core\n", "make: Leaving directory
	'/usr/src/RPM/BUILD/tupitube.desk-0.2.18/configure.tests/quazip'\n"]main.cpp:36:10:
	fatal error: QuaZip-Qt5-1.1/quazip/quazip.h: No such file or directory
	36 | #include "QuaZip-Qt5-1.1/quazip/quazip.h"
	--
	make: *** [Makefile:436: main.o] Error 1
	["make: Entering directory
	'/usr/src/RPM/BUILD/tupitube.desk-0.2.18/configure.tests/quazip'\n",
	"g++ -c -pipe -O2 -Wall -Wextra -D_REENTRANT -fPIC
	-DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -I. -I/usr/include/quazip
	-I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5/QtCore
	-I. -I/usr/lib/qt5/mkspecs/linux-g++ -o main.o main.cpp\n", "make: Leaving directory
	'/usr/src/RPM/BUILD/tupitube.desk-0.2.18/configure.tests/quazip'\n"] * Result:
	main.cpp:36:10: fatal error: QuaZip-Qt5-1.1/quazip/quazip.h: No such file or directory
	36 | #include "QuaZip-Qt5-1.1/quazip/quazip.h"
	--
	make: *** [Makefile:436: main.o] Error 1
	["make: Entering directory
	'/usr/src/RPM/BUILD/tupitube.desk-0.2.18/configure.tests/quazip'\n",
	"g++ -c -pipe -O2 -Wall -Wextra -D_REENTRANT -fPIC
	-DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -I. -I/usr/include/quazip
	-I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5/QtCore
	-I. -I/usr/lib/qt5/mkspecs/linux-g++ -o main.o main.cpp\n", "make: Leaving directory
	'/usr/src/RPM/BUILD/tupitube.desk-0.2.18/configure.tests/quazip'\n"] * Result:
	main.cpp:36:10: fatal error: QuaZip-Qt5-1.1/quazip/quazip.h: No such file or directory
	36 | #include "QuaZip-Qt5-1.1/quazip/quazip.h"
	--
	make: *** [Makefile:436: main.o] Error 1
	["make: Entering directory
	'/usr/src/RPM/BUILD/tupitube.desk-0.2.18/configure.tests/quazip'\n",
	"g++ -c -pipe -O2 -Wall -Wextra -D_REENTRANT -fPIC
	-DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -I. -I/usr/include/quazip
	-I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5/QtCore
	-I. -I/usr/lib/qt5/mkspecs/linux-g++ -o main.o main.cpp\n", "make: Leaving directory
	'/usr/src/RPM/BUILD/tupitube.desk-0.2.18/configure.tests/quazip'\n"] * Result:
	main.cpp:36:10: fatal error: QuaZip-Qt5-1.1/quazip/quazip.h: No such file or directory
	36 | #include "QuaZip-Qt5-1.1/quazip/quazip.h"
	--
	make: *** [Makefile:436: main.o] Error 1
	["make: Entering directory
	'/usr/src/RPM/BUILD/tupitube.desk-0.2.18/configure.tests/quazip'\n",
	"g++ -c -pipe -O2 -Wall -Wextra -D_REENTRANT -fPIC
	-DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -I. -I/usr/include/quazip
	-I/usr/include/qt5 -I/usr/include/qt5/QtGui -I/usr/include/qt5/QtCore
	-I. -I/usr/lib/qt5/mkspecs/linux-g++ -o main.o main.cpp\n", "make: Leaving directory
	'/usr/src/RPM/BUILD/tupitube.desk-0.2.18/configure.tests/quazip'\n"] * Result:
	[ FAILED ]
	 * Priority: required

wine-grdwine-0.5.5.1-alt1
	ld: cannot find -lntdll
	collect2: error: ld returned 1 exit status
	winegcc: /usr/bin/i586-alt-linux-gcc failed

	20 error logs REMOVED from the list
SDL2-2.0.18-alt1
emacs-docbookide-0.1-alt5
emacs-jabber-1:0.8.92-alt8
emacs-misc-modes-0.2-alt10.4
emacs-prog-modes-0.2-alt9
emacs-sml-mode-3.9.5-alt7.1
emacs-text-modes-0.2-alt3
libgdk-pixbuf-2.42.6-alt1
libgxml-0.20.0-alt1
libvirt-7.9.0-alt1
lyx-2:2.3.4.4-alt2
mixxx-2.3.1-alt1
perl-Inline-Python-0.56-alt1
php7-openssl-7.4.26-alt1
php8.0-openssl-8.0.13-alt1
python3-module-libcst-0.3.18-alt1
qpid-proton-0.28.0-alt2
quick-usb-formatter-0.6-alt19
scalacheck-1.15.4-alt1_2jpp11
zeromq-4.2.5-alt1

Total 124 error logs.


Подробная информация о списке рассылки Sisyphus-cybertalk