[cyber] I: Sisyphus-20190219 i586 beehive_status: +15 -27 (194)
ALT beekeeper
hiver на altlinux.org
Вт Фев 19 18:07:19 MSK 2019
15 NEW error logs
HikariCP-2.4.3-alt1_2jpp8
[ERROR]
[ERROR] Please refer to /usr/src/RPM/BUILD/HikariCP-HikariCP-2.4.3/target/surefire-reports
for the individual test results.
[ERROR] Please refer to dump files (if any exist) [date]-jvmRun[N].dump, [date].dumpstream
and [date]-jvmRun[N].dumpstream.
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the
following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException
SNNS-4.3-alt1.1.1.1
ar rc lib3d.a net_analyzer.o d3_xUtils.o d3_global.o d3_anageo.o d3_shade.o d3_lists.o
d3_point.o d3_dither.o d3_zgraph.o d3_fonts.o d3_graph.o d3_draw.o d3_disp.o d3_move.o
d3_zValue.o d3_setup.o d3_units.o d3_links.o d3_model.o d3_project.o d3_light.o
d3_pannels.o d3_main.o bn_bignet.o bn_basics.o bn_art1.o bn_art2.o bn_artmap.o
bn_TD_bignet.o bn_kohonen.o bn_assoz.o o_graph.o bn_JordElm.o ui_class.o bn_bighop.o
ranlib lib3d.a
make[1]: Leaving directory '/usr/src/RPM/BUILD/SNNSv4.3/xgui/sources'
make[1]: Entering directory '/usr/src/RPM/BUILD/SNNSv4.3/xgui/sources'
i586-alt-linux-gcc libxgui1.a libxgui2.a lib3d.a \
-lXaw3d -lXmu -lXt -lXext -lSM -lICE -lX11 \
../../kernel/sources/libkernel.a ../../kernel/sources/libfunc.a -lm -lfl -o xgui
/usr/bin/ld.default: libxgui1.a(ui_controlP.o): in function `ui_rem_performPrunInit':
/usr/src/RPM/BUILD/SNNSv4.3/xgui/sources/ui_controlP.c:1191: warning: the use of
`tempnam' is dangerous, better use `mkstemp'
make[1]: Leaving directory '/usr/src/RPM/BUILD/SNNSv4.3/xgui/sources'
cockpit-187-alt1
make[3]: Entering directory '/usr/src/RPM/BUILD/cockpit-187'
MESSAGE: cockpit-bridge: couldn't get polkit authority: Error initializing authority:
Could not connect: No such file or directory
PASS: test-authssh 1 /auth-ssh/basic-good
--
# SKIP: 48
# XFAIL: 0
# FAIL: 31
# XPASS: 0
# ERROR: 0
See ./test-suite.log
dillo-3.0.5-alt2
/usr/bin/ld.default: cannot find -lXinerama
collect2: error: ld returned 1 exit status
make[3]: *** [Makefile:579: dillo] Error 1
golang-github-xtaci-smux-1.0.7-alt1_1
+ go test -compiler gc github.com/xtaci/smux
--- FAIL: TestReadDeadline (0.00s)
session_test.go:554: No error when reading with past deadline
gprolog-1.4.4-alt2
make[1]: Leaving directory '/usr/src/RPM/BUILD/gprolog-1.4.4/src/Ma2Asm'
make[1]: Entering directory '/usr/src/RPM/BUILD/gprolog-1.4.4/src/Pl2Wam'
Bootstrap Prolog Compiler OK
make[1]: Leaving directory '/usr/src/RPM/BUILD/gprolog-1.4.4/src/Pl2Wam'
make[1]: Entering directory '/usr/src/RPM/BUILD/gprolog-1.4.4/src/BipsPl'
/tmp/make.log
make[1]: *** [Makefile:183: check] Error 1
make[1]: Leaving directory '/usr/src/RPM/BUILD/gprolog-1.4.4/src/BipsPl'
make: *** [Makefile:154: check] Error 2
make: Leaving directory '/usr/src/RPM/BUILD/gprolog-1.4.4/src'
mldonkey-3.1.6-alt2
File "src/networks/donkey/donkeyNodesDat.mlp", line 3, characters 5-18:
Error: Unbound module CommonOptions
make: *** [Makefile:5444: src/networks/donkey/donkeyNodesDat.cmx] Error 2
octave-4.4.1-alt2
/usr/bin/ld.default: cannot find -lXcursor
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:11275: libinterp/dldfcn/__init_fltk__.la] Error 1
--
/usr/bin/ld.default: cannot find -lXcursor
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile:11263: libinterp/dldfcn/__fltk_uigetfile__.la] Error 1
octave-image-acquisition-0.2.2-alt3
checking for v4l2_open in -lv4l2... no
configure: error: unable to find the v4l2_open() function
error: structure has no member 'dir'
perl-HTTP-Proxy-0.304-alt2
# socket is non blocking, switching to blocking mode
# Failed test 'Read some data from the socket'
# at t/23connect.t line 79.
# Failed test 'CONNECTed to the TCP server and got the banner'
# at t/23connect.t line 80.
--
t/23connect.t (Wstat: 0 Tests: 4 Failed: 2)
Failed tests: 2-3
Files=37, Tests=465, 12 wallclock secs ( 0.11 usr 0.03 sys + 4.74 cusr 0.44 csys =
5.32 CPU)
Result: FAIL
Failed 1/37 test programs. 2/465 subtests failed.
make: *** [Makefile:792: test_dynamic] Error 255
perl-IO-Event-0.813-alt2
Result: FAIL
Failed 1/12 test programs. 0/920 subtests failed.
make: *** [Makefile:780: test_dynamic] Error 255
perl-Net-SIP-0.818-alt1
t/21_channel_on_hold_stateless_proxy.t .. ok
# Failed test '[proxy] (?^:O>.*RSP\(INVITE,404\))'
# at ./t/testlib.pl line 234.
# Failed test 'Address family not supported by protocol ...propagated at
t/22_stateless_proxy_ack_on_error.t line 110.
# at ./t/testlib.pl line 31.
--
t/22_stateless_proxy_ack_on_error.t (Wstat: 256 Tests: 148 Failed: 2)
Failed tests: 147-148
Non-zero exit status: 1
--
Result: FAIL
Failed 1/20 test programs. 2/1607 subtests failed.
make: *** [Makefile:828: test_dynamic] Error 1
python-module-greenwich-0.4.1-alt1.git20150811.1.1.1
test_raster_size_args (tests.test_raster.ImageDriverTestCase) ... ok
test_affine (tests.test_raster.RasterTestCase) ... ERROR 6: Unable to load PROJ.4 library
(libproj.so.0), creation of OGRCoordinateTransformation failed.
ok
test_array (tests.test_raster.RasterTestCase) ... ERROR 6: Unable to load PROJ.4 library
(libproj.so.0), creation of OGRCoordinateTransformation failed.
ok
test_clip (tests.test_raster.RasterTestCase)
Test clipping a raster with a geometry. ... ERROR 6: Unable to load PROJ.4 library
(libproj.so.0), creation of OGRCoordinateTransformation failed.
ERROR 6: Unable to load PROJ.4 library (libproj.so.0), creation of
OGRCoordinateTransformation failed.
ERROR
test_close (tests.test_raster.RasterTestCase) ... ERROR 6: Unable to load PROJ.4 library
(libproj.so.0), creation of OGRCoordinateTransformation failed.
ok
test_count_unique (tests.test_raster.RasterTestCase) ... ERROR 6: Unable to load PROJ.4
library (libproj.so.0), creation of OGRCoordinateTransformation failed.
ok
test_crop (tests.test_raster.RasterTestCase)
Test image cropping with OGR Geometries. ... ERROR 6: Unable to load PROJ.4 library
(libproj.so.0), creation of OGRCoordinateTransformation failed.
ok
test_envelope (tests.test_raster.RasterTestCase) ... ERROR 6: Unable to load PROJ.4
library (libproj.so.0), creation of OGRCoordinateTransformation failed.
ok
test_frombytes (tests.test_raster.RasterTestCase) ... ERROR 6: Unable to load PROJ.4
library (libproj.so.0), creation of OGRCoordinateTransformation failed.
ok
seaview-4.6-alt1
/usr/bin/ld.default: cannot find -lXinerama
collect2: error: ld returned 1 exit status
make: *** [Makefile:46: seaview] Error 1
sssd-2.0.0-alt3.gitf0603645f
PASS: test_ad_subdom
FAIL: test_ipa_subdom_server
PASS: test_sssd_krb5_localauth_plugin
--
make[5]: Entering directory '/usr/src/RPM/BUILD/sssd-2.0.0'
make[5]: git: Command not found
make[5]: Leaving directory '/usr/src/RPM/BUILD/sssd-2.0.0'
--
make[6]: Entering directory '/usr/src/RPM/BUILD/sssd-2.0.0'
make[6]: git: Command not found
make[6]: Leaving directory '/usr/src/RPM/BUILD/sssd-2.0.0'
--
make[7]: Entering directory '/usr/src/RPM/BUILD/sssd-2.0.0'
make[7]: git: Command not found
make[7]: Leaving directory '/usr/src/RPM/BUILD/sssd-2.0.0'
--
# SKIP: 2
# XFAIL: 0
# FAIL: 1
# XPASS: 0
# ERROR: 0
.. contents:: :depth: 2
FAIL: test_ipa_subdom_server
[==========] Running 13 test(s).
--
[ RUN ] test_ipa_server_trust_init
[ ERROR ] --- test_ctx->ipa_ctx->server_mode->trusts
[ LINE ] --- src/tests/cmocka/test_ipa_subdomains_server.c:552: error: Failure!
27 error logs REMOVED from the list
arm-none-eabi-gcc-7.3.1-alt3
atlas-3.9.35-alt1.qa1
calligra-0:3.1.0-alt5
fontmatrix-0.9.99-alt1
gnutls30-3.6.6-alt1
jboss-common-core-0:2.5.0-alt1_6jpp8
jvgs-0.5-alt2.1.qa1
karbowanecwallet-1.3.1-alt1
kde4-plasma-nm-0.9.3.6-alt2
kde4accessibility-15.08.2-alt1
kde4utils-15.12.1-alt3
libfltk13-1.3.3-alt2
libprojectM-2.1.0-alt12
libv-1.90-alt9.2
octave-optim-1:1.5.2-alt3
picmicrosim-1.0-alt3
procbench-0.9.0a-alt3.1
python-module-aioutils-0.3.10-alt1.1
python-module-argcomplete-1.9.4-alt2
qcat-0.5-alt5.1.qa1
qlandkartegt-1.8.1-alt1
qt5-wayland-5.11.3-alt1
sbcl-1.4.12-alt3
scribus-1:1.5.5-alt1
sni-qt4-0.2.7-alt0.1
spice-up-1.7.0-alt1
zopfli-1.0.2-alt2
Total 194 error logs.
Подробная информация о списке рассылки Sisyphus-cybertalk