[cyber] I: Sisyphus-20190209 i586 beehive_status: +14 -20 (208)

ALT beekeeper hiver на altlinux.org
Сб Фев 9 16:15:15 MSK 2019


	14 NEW error logs

HikariCP-2.4.3-alt1_2jpp8
	[ERROR]
	[ERROR] Please refer to /usr/src/RPM/BUILD/HikariCP-HikariCP-2.4.3/target/surefire-reports
	for the individual test results.
	[ERROR] Please refer to dump files (if any exist) [date]-jvmRun[N].dump, [date].dumpstream
	and [date]-jvmRun[N].dumpstream.
	[ERROR] -> [Help 1]
	[ERROR]
	[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
	[ERROR] Re-run Maven using the -X switch to enable full debug logging.
	[ERROR]
	[ERROR] For more information about the errors and possible solutions, please read the
	following articles:
	[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException

LibreOffice-6.1.3.1-alt3
	checking for doxygen... /usr/bin/doxygen
	configure: error: dot not found in $PATH but doxygen defaults to HAVE_DOT=YES; install
	graphviz or disable its use via --without-doxygen
	Error running configure at ./autogen.sh line 289.

curl-7.64.0-alt1
	TESTDONE: 951 tests out of 952 reported OK: 99%
	TESTFAIL: These test cases failed: 644
	TESTDONE: 1235 tests were considered during 357 seconds.

dbus-1.12.12-alt1
	autoreconf-default: running: /usr/bin/autoconf-2.60 --force
	configure:18548: error: Unexpanded AX_ macro found. Please install GNU autoconf-archive
	If this token and others are legitimate, please use m4_pattern_allow.

gnome-games-hitori-3.22.4-alt1
	config.status: executing depfiles commands
	config.status: executing libtool commands
	config.status: executing po-directories commands
	config.status: creating po/POTFILES
	config.status: creating po/Makefile
	configure: WARNING: unrecognized options: --without-included-gettext
	+ make -j8
	make: Entering directory '/usr/src/RPM/BUILD/hitori-3.22.4'
	Makefile:1388: *** missing separator.  Stop.
	make: Leaving directory '/usr/src/RPM/BUILD/hitori-3.22.4'

golang-github-xtaci-smux-1.0.7-alt1_1
	+ go test -compiler gc github.com/xtaci/smux
	--- FAIL: TestReadDeadline (0.00s)
	session_test.go:554: No error when reading with past deadline

intercal-0.29-alt1.git20140828.1
	groff -U -dc=n -Tps    -p -t -mm intercal.mm >intercal.refs.tmp
	intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
	sed <intercal.refs.tmp -e '/hn \([0-9]*\)\.$/s//hn \1/' >tmp.refs;
	mv tmp.refs intercal.refs.tmp
	mv: cannot stat 'tmp.refs': No such file or directory
	make: *** [Makefile:32: original.ps] Error 1
	--
	groff -U -dc=n -Tascii -p -t -mm intercal.mm > intercal.refs.tmp
	intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
	intercal.mm:3069: warning: can't find special character `no'
	--
	GROFF_NO_SGR=1 groff -U -dc=n -Tascii -p -t -mm intercal.mm >original.txt
	intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
	intercal.mm:3069: warning: can't find special character `no'
	--
	groff -U -dc=y -Tascii -p -t -mm intercal.mm > intercal.refs.tmp
	intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
	intercal.mm:3115: warning: can't find special character `no'
	--
	GROFF_NO_SGR=1 groff -U -dc=y -Tascii -p -t -mm intercal.mm >intercal.txt
	intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
	intercal.mm:3115: warning: can't find special character `no'
	--
	groff -U -dc=y -Tps    -p -t -mm intercal.mm >intercal.refs.tmp
	intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
	sed <intercal.refs.tmp -e '/hn \([0-9]*\)\.$/s//hn \1/' >tmp.refs;
	--
	groff -U -dc=y -Tps    -p -t -mm intercal.mm >intercal.ps
	intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
	rm -f intercal.refs.qrf intercal.refs.tmp

libcacard-2.6.1-alt1
	configure: WARNING: unrecognized options: --without-included-gettext
	configure:
	libcacard - 2.6.1
	Б─╒ Prefix: /usr
	Б─╒ PCSC enabled: yes
	Б─╒ Code coverage: no
	+ make -j8
	make: Entering directory '/usr/src/RPM/BUILD/libcacard-2.6.1'
	Makefile:1949: *** missing separator.  Stop.
	make: Leaving directory '/usr/src/RPM/BUILD/libcacard-2.6.1'

libcjs-4.0.0-alt1
	readline:		yes
	dtrace:			no
	systemtap:		no
	Profiler:		yes
	Run tests under:	dbus
	Code coverage:		no
	+ make -j8
	make: Entering directory '/usr/src/RPM/BUILD/cjs-4.0.0'
	Makefile:3391: *** missing separator.  Stop.
	make: Leaving directory '/usr/src/RPM/BUILD/cjs-4.0.0'

libgdata-0.17.9-alt1
	config.status: creating docs/reference/Makefile
	config.status: creating config.h
	config.status: executing depfiles commands
	config.status: executing libtool commands
	config.status: executing po/stamp-it commands
	configure: WARNING: unrecognized options: --without-included-gettext
	+ make -j8
	make: Entering directory '/usr/src/RPM/BUILD/libgdata-0.17.9'
	Makefile:4122: *** missing separator.  Stop.
	make: Leaving directory '/usr/src/RPM/BUILD/libgdata-0.17.9'

liboil-0.3.17-alt1.qa1
	../test-driver: line 107: 13665 Segmentation fault	"$@" > $log_file 2>&1
	FAIL: stride
	PASS: dso_check
	--
	# SKIP:  0
	# XFAIL: 0
	# FAIL:  1
	# XPASS: 0
	# ERROR: 0
	See testsuite/test-suite.log

python-module-aioutils-0.3.10-alt1.1
	/usr/src/RPM/BUILD/python3/aioutils/yielder.py:54: DeprecationWarning: asyncio.async()
	function is deprecated, use ensure_future()
	task = asyncio.async(coro)
	/usr/src/RPM/BUILD/python3/aioutils/yielder.py:54: DeprecationWarning: asyncio.async()
	function is deprecated, use ensure_future()
	task = asyncio.async(coro)
	/usr/src/RPM/BUILD/python3/aioutils/yielder.py:54: DeprecationWarning: asyncio.async()
	function is deprecated, use ensure_future()
	task = asyncio.async(coro)
	/usr/src/RPM/BUILD/python3/aioutils/yielder.py:54: DeprecationWarning: asyncio.async()
	function is deprecated, use ensure_future()
	task = asyncio.async(coro)
	-- Docs: https://docs.pytest.org/en/latest/warnings.html
	============== 1 failed, 16 passed, 879 warnings in 4.12 seconds ===============

sgc-0.2.1-alt2
	+ xvfb-run sh makedocs
	_XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created.
	The XKEYBOARD keymap compiler (xkbcomp) reports:
	--
	pygame.display.init()
	error: Couldn't open X11 display
	The full traceback has been saved in /usr/src/tmp/sphinx-err-IR4HZY.log, if you want
	to report the issue to the developers.

wicd-1.7.4-alt1
	creating /usr/src/tmp/wicd-buildroot/usr/share/locale/ca/LC_MESSAGES
	error: can't copy 'translations/ca/LC_MESSAGES/wicd.mo': doesn't exist or not a
	regular file

	20 error logs REMOVED from the list
Uranium-3.4.1-alt1.1
alterator-lilo-1.9-alt1
archivemail-0.9.0-alt1
atlas-3.9.35-alt1.qa1
clanlib-2.3.7-alt1_6
clisp-1:2.49.92-alt1
cura-1:3.4.1-alt1
dsniff-2.4-alt0.12.b1
libArcus-3.4.1-alt1
openqa-4.5.1528009330.e68ebe2b-alt1
perl-HTTP-Proxy-0.304-alt2
perl-Mo-0.40-alt1
perl-Mojo-IOLoop-ReadWriteProcess-0.23-alt1
perl-Test-Easy-1.11-alt1
pommed-1.39-alt8
pspp-1.0.1-alt1
python-module-sh-1.12.14-alt4
rogue-5.4.4-alt2
sgc-0.2.1-alt1
trac-1.0-alt4

Total 208 error logs.


Подробная информация о списке рассылки Sisyphus-cybertalk