[cyber] I: Sisyphus-20190409 x86_64 beehive_status: +23 -13 (65)
ALT beekeeper
hiver на altlinux.org
Вт Апр 9 09:30:55 MSK 2019
23 NEW error logs
ORBit2-2.14.20-alt0.2
make[4]: *** [Makefile:476: all] Error 2
make[4]: Leaving directory '/usr/src/RPM/BUILD/ORBit2-2.14.20/src/services/name'
make[3]: *** [Makefile:394: all-recursive] Error 1
make[3]: Leaving directory '/usr/src/RPM/BUILD/ORBit2-2.14.20/src/services'
make[2]: *** [Makefile:391: all-recursive] Error 1
make[2]: Leaving directory '/usr/src/RPM/BUILD/ORBit2-2.14.20/src'
make[1]: *** [Makefile:597: all-recursive] Error 1
make[1]: Leaving directory '/usr/src/RPM/BUILD/ORBit2-2.14.20'
make: *** [Makefile:434: all] Error 2
make: Leaving directory '/usr/src/RPM/BUILD/ORBit2-2.14.20'
clamav-0.101.2-alt1
checking whether x86_64-alt-linux-g++ accepts -g... yes
configure: error: cannot find install-sh, install.sh, or shtool in "." "./.." "./../.."
curl-7.64.1-alt1
TESTDONE: 955 tests out of 956 reported OK: 99%
TESTFAIL: These test cases failed: 587
TESTDONE: 1242 tests were considered during 350 seconds.
geda-xgsch2pcb-0.1.3-alt1
autom4te-default: /usr/bin/m4 failed with exit status: 1
aclocal-default: error: echo failed with exit status: 1
autogen.sh running: automake ...
configure.ac: error: no proper invocation of AM_INIT_AUTOMAKE was found.
configure.ac: You should verify that configure.ac invokes AM_INIT_AUTOMAKE,
--
Makefile.am: installing './INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am:33: error: 'nodist_python_PYTHON' is used but 'pythondir' is undefined
Makefile.am:33: The usual way to define 'pythondir' is to add 'AM_PATH_PYTHON'
Makefile.am:33: to 'configure.ac' and run 'aclocal' and 'autoconf' again.
Makefile.am:25: error: 'python_PYTHON' is used but 'pythondir' is undefined
Makefile.am:25: The usual way to define 'pythondir' is to add 'AM_PATH_PYTHON'
Makefile.am:25: to 'configure.ac' and run 'aclocal' and 'autoconf' again.
data/Makefile.am:39: error: ENABLE_UPDATE_DESKTOP_DATABASE does not appear in
AM_CONDITIONAL
data/Makefile.am:44: error: ENABLE_UPDATE_DESKTOP_DATABASE does not appear in
AM_CONDITIONAL
autogen.sh running: autoconf ...
configure.ac:27: error: possibly undefined macro: AM_INIT_AUTOMAKE
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.ac:37: error: possibly undefined macro: AM_PATH_PYTHON
configure.ac:63: error: possibly undefined macro: AM_CONDITIONAL
libbonobo-2.32.1-alt4
CC echo-client.o
echo-client.c:12:10: fatal error: Bonobo_Sample_Echo.h: No such file or directory
#include "Bonobo_Sample_Echo.h"
libdbus-qt-0.62-alt9.1.1.qa2
+ umask 022
+ /bin/mkdir -p /usr/src/RPM/BUILD
+ cd /usr/src/RPM/BUILD
+ cd dbus-qt3-0.62
+ make -f admin/Makefile.common cvs
make: Entering directory '/usr/src/RPM/BUILD/dbus-qt3-0.62'
*** YOU'RE USING automake (GNU automake) 1.16.
*** KDE requires automake 1.6.1 or newer
make: *** [admin/Makefile.common:10: cvs] Error 1
make: Leaving directory '/usr/src/RPM/BUILD/dbus-qt3-0.62'
libdvbcsa-1.1.0-alt5
patching file src/dvbcsa_bs_uint64.h
patching file test/testbsops.c
+ exit 0
Executing(%build): /bin/sh -e /usr/src/tmp/rpm-tmp.1194
+ umask 022
+ /bin/mkdir -p /usr/src/RPM/BUILD
+ cd /usr/src/RPM/BUILD
+ cd libdvbcsa-1.1.0
+ ./bootstrap
./bootstrap: you need automake version 1.5 or later
libgpod4-0.8.3-alt6
autom4te-2.60: /usr/bin/m4 failed with exit status: 1
aclocal-default: error: echo failed with exit status: 1
autoreconf-default: aclocal failed with exit status: 1
libmemcached-1.0.18-alt2
checking for x86_64-alt-linux-gcc option to accept ISO C89... none needed
configure: error: cannot find install-sh, install.sh, or shtool in "." "./.." "./../.."
libpeas-1.22.0-alt2
autom4te-2.60: /usr/bin/m4 failed with exit status: 1
aclocal-default: error: echo failed with exit status: 1
autoreconf-default: aclocal failed with exit status: 1
mypaint-brushes-1.3.0-alt1
I am testing that you have the tools required to build
mypaint-brushes from git. This test is not foolproof.
checking for autoconf >= 2.62 ... yes (version 2.69)
checking for automake >= 1.13 ...
You must have automake 1.13 or newer installed to compile mypaint-brushes.
Download the appropriate package for your distribution,
or get the source tarball at ftp://ftp.gnu.org/pub/gnu/automake/
./autogen.sh: line 113: automake-1.13: command not found
Major version might be too new (1.13)
Please install/upgrade the missing tools and call me again.
perl-IO-Event-0.813-alt2
Result: FAIL
Failed 1/12 test programs. 0/920 subtests failed.
make: *** [Makefile:780: test_dynamic] Error 255
perl-Net-SSLeay-1.86_09-alt1
t/local/35_ephemeral.t ................. skipped: libressl and OpenSSL 1.1 removed
support for ephemeral/temporary RSA private keys
# Failed test 'X509_verify_cert correctly succeeds'
# at t/local/36_verify.t line 249.
# Failed test 'X509_STORE_CTX_get_error returns ok'
# at t/local/36_verify.t line 250.
--
t/local/36_verify.t (Wstat: 512 Tests: 103 Failed: 2)
Failed tests: 102-103
Non-zero exit status: 2
--
Result: FAIL
Failed 1/40 test programs. 2/3313 subtests failed.
make: *** [Makefile:978: test_dynamic] Error 255
pympi-2.5.b6-alt18.cvs20141103
/usr/bin/ld.default: cannot find -lpyMPI
collect2: error: ld returned 1 exit status
make[1]: *** [Makefile:858: pyMPI] Error 1
python-module-pythonmagick-0.9.64-alt1.20170528.S1.2
autom4te-2.60: /usr/bin/m4 failed with exit status: 1
aclocal-default: error: echo failed with exit status: 1
autoreconf-default: aclocal failed with exit status: 1
python-module-selectors34-1.2.0-alt1.1
tests/test_selectors34.py::EpollSelectorTestCase::test_select_interrupt_exc PASSED [ 60%]
tests/test_selectors34.py::EpollSelectorTestCase::test_select_interrupt_noraise FAILED
[ 61%]
tests/test_selectors34.py::EpollSelectorTestCase::test_selector PASSED [ 62%]
--
> self.assertGreaterEqual(time() - t, 1.0)
E AssertionError: 0.9991641044616699 not greater than or equal to 1.0
tests/test_selectors34.py:397: AssertionError
python3-3.6.8-alt1
20 tests skipped:
test_curses test_devpoll test_kqueue test_msilib test_nis
test_ossaudiodev test_smtpnet test_socketserver test_startfile
test_timeout test_tix test_tk test_ttk_guionly test_urllib2net
test_urllibnet test_winconsoleio test_winreg test_winsound
test_xmlrpc_net test_zipfile64
2 tests run no tests:
test_dtrace test_future4
Total duration: 5 min 24 sec
Tests result: FAILURE
scribus-1:1.5.5-alt2
/usr/src/RPM/BUILD/scribus-1.5.5/scribus/plugins/import/pdf/importpdf.cpp: In member
function 'bool PdfPlug::convert(const QString&)':
/usr/src/RPM/BUILD/scribus-1.5.5/scribus/plugins/import/pdf/importpdf.cpp:520:38: error:
use of deleted function 'Object::Object(const Object&)'
Object ref = order->getNF(i);
sox-14.4.2-alt3
file /usr/share/info/automake-history.info.xz from install of
automake_1.14-1.14.1-alt4.noarch conflicts with file from package
automake_1.16-1.16-alt1.noarch
hsh-install: Packages installation failed.
texlive-2018-alt2_10
../../../texk/web2c/pdftexdir/pdftoepdf.cc: In function 'void copyDictEntry(Object*, int)':
../../../texk/web2c/pdftexdir/pdftoepdf.cc:295:31: error: use of deleted function
'Object& Object::operator=(const Object&)'
obj1 = obj->dictGetValNF(i);
--
../../../texk/web2c/pdftexdir/pdftoepdf.cc: In function 'void copyProcSet(Object*)':
../../../texk/web2c/pdftexdir/pdftoepdf.cc:354:36: error: use of deleted function
'Object& Object::operator=(const Object&)'
procset = obj->arrayGetNF(i);
--
../../../texk/web2c/pdftexdir/pdftoepdf.cc: In function 'void copyFont(char*, Object*)':
../../../texk/web2c/pdftexdir/pdftoepdf.cc:409:61: error: use of deleted function
'Object& Object::operator=(const Object&)'
fontdescRef = fontdict.dictLookupNF("FontDescriptor");
--
../../../texk/web2c/pdftexdir/pdftoepdf.cc: In function 'void copyFontResources(Object*)':
../../../texk/web2c/pdftexdir/pdftoepdf.cc:455:38: error: use of deleted function
'Object& Object::operator=(const Object&)'
fontRef = obj->dictGetValNF(i);
--
../../../texk/web2c/pdftexdir/pdftoepdf.cc: In function 'void copyObject(Object*)':
../../../texk/web2c/pdftexdir/pdftoepdf.cc:598:37: error: use of deleted function
'Object& Object::operator=(const Object&)'
obj1 = obj->arrayGetNF(i);
--
../../../texk/web2c/pdftexdir/pdftoepdf.cc: In function 'void write_epdf()':
../../../texk/web2c/pdftexdir/pdftoepdf.cc:924:44: error: use of deleted function
'Object& Object::operator=(const Object&)'
dictObj = pageDict->lookupNF("Metadata");
--
Object &operator=(const Object &other) = delete;
../../../texk/web2c/pdftexdir/pdftoepdf.cc:930:53: error: use of deleted function
'Object& Object::operator=(const Object&)'
dictObj = pageDict->lookupNF(pageDictKeys[i]);
--
Object &operator=(const Object &other) = delete;
../../../texk/web2c/pdftexdir/pdftoepdf.cc:939:41: error: use of deleted function
'Object& Object::operator=(const Object&)'
dictObj = pageDict->lookupNF("Group");
--
Object &operator=(const Object &other) = delete;
../../../texk/web2c/pdftexdir/pdftoepdf.cc:981:48: error: cannot bind rvalue reference
of type 'Object&&' to lvalue of type 'const Object'
dic1.getValNF(i));
util-linux-2.32-alt2
autom4te-default: /usr/bin/m4 failed with exit status: 1
aclocal-default: error: echo failed with exit status: 1
error: Bad exit status from /usr/src/tmp/rpm-tmp.88246 (%build)
xfmpc-0.2.90-alt1
rpm-build-licenses is already the newest version.
E: Couldn't find package libxfcegui4-devel
hsh-install: Failed to calculate package file list.
xplayer-2.0.2-alt1.1
autom4te-2.60: /usr/bin/m4 failed with exit status: 1
aclocal-default: error: echo failed with exit status: 1
autoreconf-default: aclocal failed with exit status: 1
13 error logs REMOVED from the list
SNNS-4.3-alt1.1.1.1
archivemail-0.9.0-alt2
automake_1.11-1.11.6-alt8
automake_1.14-1.14.1-alt3
jed-2:0.99.19-alt2.qa2.1
libdmapsharing-2.9.39-alt1
libidn2-2.1.1-alt1
libpng16-1.6.36-alt1
opennebula-5.8.1-alt1
openqa-4.5.1528009330.e68ebe2b-alt2
qt4-4.8.7-alt14
sssd-2.1.0-alt1
xblas-1.0.248-alt1.2
Total 65 error logs.
Подробная информация о списке рассылки Sisyphus-cybertalk