[cyber] I: Sisyphus-20181108 i586 beehive_status: +17 -12 (361)
ALT beekeeper
hiver на altlinux.org
Чт Ноя 8 14:29:24 MSK 2018
17 NEW error logs
LibreOffice-6.1.3.1-alt2
/usr/src/RPM/BUILD/libreoffice-6.1.3.1/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:246:49:
error: 'GBool' has not been declared
int *maskColors, GBool inlineImg) override;
/usr/src/RPM/BUILD/libreoffice-6.1.3.1/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:251:38:
error: 'GBool' has not been declared
GBool interpolate,
/usr/src/RPM/BUILD/libreoffice-6.1.3.1/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:254:38:
error: 'GBool' has not been declared
GBool maskInvert
/usr/src/RPM/BUILD/libreoffice-6.1.3.1/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:256:40:
error: 'GBool' has not been declared
, GBool maskInterpolate
/usr/src/RPM/BUILD/libreoffice-6.1.3.1/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:263:42:
error: 'GBool' has not been declared
GBool interpolate,
/usr/src/RPM/BUILD/libreoffice-6.1.3.1/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:269:44:
error: 'GBool' has not been declared
, GBool maskInterpolate
/usr/src/RPM/BUILD/libreoffice-6.1.3.1/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:169:22:
error: 'virtual void pdfi::PDFOutDev::setDefaultCTM(double*)' marked 'override', but
does not override
virtual void setDefaultCTM(double *ctm) override;
/usr/src/RPM/BUILD/libreoffice-6.1.3.1/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:235:22:
error: 'virtual void pdfi::PDFOutDev::drawImageMask(GfxState*, Object*, Stream*, int,
int, int, int, int)' marked 'override', but does not override
virtual void drawImageMask(GfxState *state, Object *ref, Stream *str,
/usr/src/RPM/BUILD/libreoffice-6.1.3.1/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:241:22:
error: 'virtual void pdfi::PDFOutDev::drawImage(GfxState*, Object*, Stream*, int, int,
GfxImageColorMap*, int, int*, int)' marked 'override', but does not override
virtual void drawImage(GfxState *state, Object *ref, Stream *str,
/usr/src/RPM/BUILD/libreoffice-6.1.3.1/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:247:22:
error: 'virtual void pdfi::PDFOutDev::drawMaskedImage(GfxState*, Object*, Stream*,
int, int, GfxImageColorMap*, int, Stream*, int, int, int, int)' marked 'override',
but does not override
virtual void drawMaskedImage(GfxState *state, Object *ref, Stream *str,
LibreOffice-still-6.0.7.2-alt1
/usr/src/RPM/BUILD/libreoffice-6.0.7.2/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:239:36:
error: 'GBool' has not been declared
GBool inlineImg) override;
/usr/src/RPM/BUILD/libreoffice-6.0.7.2/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:243:32:
error: 'GBool' has not been declared
GBool interpolate,
/usr/src/RPM/BUILD/libreoffice-6.0.7.2/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:245:49:
error: 'GBool' has not been declared
int *maskColors, GBool inlineImg) override;
/usr/src/RPM/BUILD/libreoffice-6.0.7.2/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:250:38:
error: 'GBool' has not been declared
GBool interpolate,
/usr/src/RPM/BUILD/libreoffice-6.0.7.2/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:253:38:
error: 'GBool' has not been declared
GBool maskInvert
/usr/src/RPM/BUILD/libreoffice-6.0.7.2/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:255:40:
error: 'GBool' has not been declared
, GBool maskInterpolate
/usr/src/RPM/BUILD/libreoffice-6.0.7.2/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:262:42:
error: 'GBool' has not been declared
GBool interpolate,
/usr/src/RPM/BUILD/libreoffice-6.0.7.2/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:268:44:
error: 'GBool' has not been declared
, GBool maskInterpolate
/usr/src/RPM/BUILD/libreoffice-6.0.7.2/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:168:22:
error: 'virtual void pdfi::PDFOutDev::setDefaultCTM(double*)' marked 'override', but
does not override
virtual void setDefaultCTM(double *ctm) override;
/usr/src/RPM/BUILD/libreoffice-6.0.7.2/sdext/source/pdfimport/xpdfwrapper/pdfioutdev_gpl.hxx:234:22:
error: 'virtual void pdfi::PDFOutDev::drawImageMask(GfxState*, Object*, Stream*, int,
int, int, int, int)' marked 'override', but does not override
virtual void drawImageMask(GfxState *state, Object *ref, Stream *str,
OpenBoard-1.3.6-alt3.1.S1
src/pdf/XPDFRenderer.cpp: In member function 'QImage* XPDFRenderer::createPDFImage(int,
qreal, qreal, const QRectF&)':
src/pdf/XPDFRenderer.cpp:185:58: error: 'gFalse' was not declared in this scope
mSplash = new SplashOutputDev(splashModeRGB8, 1, gFalse, paperColor);
--
qFabs
src/pdf/XPDFRenderer.cpp:188:9: error: 'GBool' was not declared in this scope
GBool useMediaBox = gFalse;
--
bool
src/pdf/XPDFRenderer.cpp:189:15: error: expected ';' before 'crop'
GBool crop = gTrue;
src/pdf/XPDFRenderer.cpp:190:15: error: expected ';' before 'printing'
GBool printing = gFalse;
src/pdf/XPDFRenderer.cpp:197:46: error: 'useMediaBox' was not declared in this scope
rotation, useMediaBox, crop, printing);
src/pdf/XPDFRenderer.cpp:197:59: error: 'crop' was not declared in this scope
rotation, useMediaBox, crop, printing);
--
cos
src/pdf/XPDFRenderer.cpp:197:65: error: 'printing' was not declared in this scope
rotation, useMediaBox, crop, printing);
--
printf
src/pdf/XPDFRenderer.cpp:207:27: error: 'useMediaBox' was not declared in this scope
rotation, useMediaBox, crop, printing, mSliceX, mSliceY, sliceW, sliceH);
src/pdf/XPDFRenderer.cpp:207:40: error: 'crop' was not declared in this scope
rotation, useMediaBox, crop, printing, mSliceX, mSliceY, sliceW, sliceH);
--
cos
src/pdf/XPDFRenderer.cpp:207:46: error: 'printing' was not declared in this scope
rotation, useMediaBox, crop, printing, mSliceX, mSliceY, sliceW, sliceH);
apache-commons-lang-0:2.6-alt5_21jpp8
[ERROR] testNextDouble(org.apache.commons.lang.math.RandomUtilsTest) Time elapsed:
0.006 s <<< FAILURE!
junit.framework.AssertionFailedError: chi-square test -- will fail about 1 in 1000 times
at junit.framework.Assert.fail(Assert.java:57)
calligra-0:3.1.0-alt4.S1
printf
/usr/src/RPM/BUILD/calligra-3.1.0/filters/karbon/pdf/PdfImport.cpp:106:13: error:
'memCheck' is not a member of 'Object'
Object::memCheck(stderr);
cups-filters-1.21.3-alt2
filter/pdftoraster.cxx: In function 'void outPage(PDFDoc*, Catalog*, int, SplashOutputDev*,
cups_raster_t*)':
filter/pdftoraster.cxx:1689:45: error: invalid conversion from 'const PDFRectangle*'
to 'PDFRectangle*' [-fpermissive]
PDFRectangle *mediaBox = page->getMediaBox();
filter/pdftoraster.cxx:1817:6: error: 'gTrue' was not declared in this scope
gTrue,gTrue,gTrue);
--
filter/pdftoraster.cxx: In function 'int main(int, char**)':
filter/pdftoraster.cxx:1970:37: error: invalid conversion from 'void (*)(void*,
ErrorCategory, Goffset, char*) {aka void (*)(void*, ErrorCategory, long long int,
char*)}' to 'void (*)(void*, ErrorCategory, Goffset, const char*) {aka void (*)(void*,
ErrorCategory, long long int, const char*)}' [-fpermissive]
setErrorCallback(::myErrorFun,NULL);
--
extern void setErrorCallback(void (*cbk)(void *data, ErrorCategory category,
filter/pdftoraster.cxx:2127:5: error: 'gFalse' was not declared in this scope
gFalse,paperColor,gTrue
--
pause
filter/pdftoraster.cxx:2127:23: error: 'gTrue' was not declared in this scope
gFalse,paperColor,gTrue
--
gfree
filter/pdftoraster.cxx:2166:11: error: 'memCheck' is not a member of 'Object'
Object::memCheck(stderr);
filter/pdftoraster.cxx:2167:3: error: 'gMemReport' was not declared in this scope
gMemReport(stderr);
gdcm-2.8.4-alt2_8.1
make[2]: Entering directory '/usr/src/RPM/BUILD/gdcm-2.8.4/i586-alt-linux'
[ 98%] Linking CXX shared library ../../bin/libgdcmMEXD.so
cd /usr/src/RPM/BUILD/gdcm-2.8.4/i586-alt-linux/Source/MessageExchangeDefinition &&
/usr/bin/cmake -E cmake_link_script CMakeFiles/gdcmMEXD.dir/link.txt --verbose=1
/usr/bin/c++ -fPIC -pipe -frecord-gcc-switches -Wall -g -O2 -march=i586
-mtune=generic -O2 -g -DNDEBUG -shared -Wl,-soname,libgdcmMEXD.so.2.8 -o
../../bin/libgdcmMEXD.so.2.8.4 CMakeFiles/gdcmMEXD.dir/gdcmAAbortPDU.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmAAssociateACPDU.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmAAssociateRJPDU.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmAAssociateRQPDU.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmAbstractSyntax.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmApplicationContext.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmAReleaseRPPDU.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmAReleaseRQPDU.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmARTIMTimer.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmAsynchronousOperationsWindowSub.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmBaseQuery.cxx.o CMakeFiles/gdcmMEXD.dir/gdcmBaseRootQuery.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmCEchoMessages.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmCFindMessages.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmCMoveMessages.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmCommandDataSet.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmCompositeMessageFactory.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmCompositeNetworkFunctions.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmCStoreMessages.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmFindPatientRootQuery.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmFindStudyRootQuery.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmImplementationClassUIDSub.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmImplementationUIDSub.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmImplementationVersionNameSub.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmMaximumLengthSub.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmModalityPerformedProcedureStepCreateQuery.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmModalityPerformedProcedureStepSetQuery.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmMovePatientRootQuery.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmMoveStudyRootQuery.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmNActionMessages.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmNCreateMessages.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmNDeleteMessages.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmNEventReportMessages.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmNGetMessages.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmNormalizedMessageFactory.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmNormalizedNetworkFunctions.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmNSetMessages.cxx.o CMakeFiles/gdcmMEXD.dir/gdcmPDataTFPDU.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmPDUFactory.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmPresentationContext.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmPresentationContextAC.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmPresentationContextGenerator.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmPresentationContextRQ.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmPresentationDataValue.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmQueryBase.cxx.o CMakeFiles/gdcmMEXD.dir/gdcmQueryFactory.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmQueryImage.cxx.o CMakeFiles/gdcmMEXD.dir/gdcmQueryPatient.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmQuerySeries.cxx.o CMakeFiles/gdcmMEXD.dir/gdcmQueryStudy.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmRoleSelectionSub.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmServiceClassApplicationInformation.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmServiceClassUser.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmSOPClassExtendedNegociationSub.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmTransferSyntaxSub.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmULActionAA.cxx.o CMakeFiles/gdcmMEXD.dir/gdcmULActionAE.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmULActionAR.cxx.o CMakeFiles/gdcmMEXD.dir/gdcmULActionDT.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmULBasicCallback.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmULConnection.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmULConnectionInfo.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmULConnectionManager.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmULTransitionTable.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmULWritingCallback.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmUserInformation.cxx.o
CMakeFiles/gdcmMEXD.dir/gdcmWLMFindQuery.cxx.o
-Wl,-rpath,/usr/src/RPM/BUILD/gdcm-2.8.4/i586-alt-linux/bin: ../../bin/libgdcmMSFF.so.2.8.4
../../bin/libgdcmDICT.so.2.8.4 ../../bin/libgdcmIOD.so.2.8.4 ../../bin/libsocketxx.so.1.2.0
../../bin/libgdcmDSED.so.2.8.4 ../../bin/libgdcmCommon.so.2.8.4
-Wl,-rpath-link,/usr/src/RPM/BUILD/gdcm-2.8.4/i586-alt-linux/bin
cd /usr/src/RPM/BUILD/gdcm-2.8.4/i586-alt-linux/Source/MessageExchangeDefinition
&& /usr/bin/cmake -E cmake_symlink_library ../../bin/libgdcmMEXD.so.2.8.4
../../bin/libgdcmMEXD.so.2.8 ../../bin/libgdcmMEXD.so
make[2]: Leaving directory '/usr/src/RPM/BUILD/gdcm-2.8.4/i586-alt-linux'
make[1]: Entering directory '/usr/src/RPM/BUILD/gdcm-2.8.4/i586-alt-linux'
[ 98%] Built target gdcmMEXD
make[1]: Leaving directory '/usr/src/RPM/BUILD/gdcm-2.8.4/i586-alt-linux'
make: *** [Makefile:166: all] Error 2
gprolog-1.4.4-alt2
test 27: call_c()+switch_ret...
test 27 OK
MA checks suceeded
make[1]: Leaving directory '/usr/src/RPM/BUILD/gprolog-1.4.4/src/Ma2Asm'
make[1]: Entering directory '/usr/src/RPM/BUILD/gprolog-1.4.4/src/Pl2Wam'
/tmp/make.log
make[1]: *** [Makefile:64: check] Error 1
make[1]: Leaving directory '/usr/src/RPM/BUILD/gprolog-1.4.4/src/Pl2Wam'
make: *** [Makefile:154: check] Error 2
make: Leaving directory '/usr/src/RPM/BUILD/gprolog-1.4.4/src'
inkscape-0.92.3-alt3
extension/internal/pdfinput/svg-builder.cpp:701:43: error: invalid conversion from
'const double*' to 'double*' [-fpermissive]
double *bbox = tiling_pattern->getBBox();
extension/internal/pdfinput/svg-builder.cpp:731:57: error: call to 'void
PdfParser::parse(Object*, int)' uses the default argument for parameter 2, which is
not yet defined
pdf_parser->parse(tiling_pattern->getContentStream());
extension/internal/pdfinput/svg-builder.cpp: In member function 'gchar*
Inkscape::Extension::Internal::SvgBuilder::_createGradient(GfxShading*, double*, bool)':
extension/internal/pdfinput/svg-builder.cpp:770:38: error: invalid conversion from
'const Function*' to 'Function*' [-fpermissive]
func = axial_shading->getFunc(0);
extension/internal/pdfinput/svg-builder.cpp:785:39: error: invalid conversion from
'const Function*' to 'Function*' [-fpermissive]
func = radial_shading->getFunc(0);
extension/internal/pdfinput/svg-builder.cpp: In member function 'bool
Inkscape::Extension::Internal::SvgBuilder::_addGradientStops(Inkscape::XML::Node*,
GfxShading*, Function*)':
extension/internal/pdfinput/svg-builder.cpp:881:50: error: invalid conversion from
'const double*' to 'double*' [-fpermissive]
double *bounds = stitchingFunc->getBounds();
extension/internal/pdfinput/svg-builder.cpp:882:50: error: invalid conversion from
'const double*' to 'double*' [-fpermissive]
double *encode = stitchingFunc->getEncode();
extension/internal/pdfinput/svg-builder.cpp:893:91: error: static_cast from type 'const
Function*' to type 'ExponentialFunction*' casts away qualifiers
double expE = (static_cast<ExponentialFunction*>(stitchingFunc->getFunc(i)))->getE();
extension/internal/pdfinput/svg-builder.cpp: In member function 'void
Inkscape::Extension::Internal::SvgBuilder::updateFont(GfxState*)':
extension/internal/pdfinput/svg-builder.cpp:1151:50: error: invalid conversion from
'const double*' to 'double*' [-fpermissive]
double *font_matrix = font->getFontMatrix();
extension/internal/pdfinput/svg-builder.cpp: In member function 'void
Inkscape::Extension::Internal::SvgBuilder::updateTextMatrix(GfxState*)':
extension/internal/pdfinput/svg-builder.cpp:1196:44: error: invalid conversion from
'const double*' to 'double*' [-fpermissive]
double *text_matrix = state->getTextMat();
--
In file included from extension/internal/pdfinput/pdf-input.cpp:50:0:
extension/internal/pdfinput/pdf-parser.h:99:5: error: 'GBool' does not name a type;
did you mean 'FcBool'?
GBool executed; // whether the operator has been executed
intercal-0.29-alt1.git20140828.1
groff -U -dc=y -Tps -p -t -mm intercal.mm >intercal.refs.tmp
intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
sed <intercal.refs.tmp -e '/hn \([0-9]*\)\.$/s//hn \1/' >tmp.refs;
mv tmp.refs intercal.refs.tmp
mv: cannot stat 'tmp.refs': No such file or directory
make: *** [Makefile:25: intercal.ps] Error 1
--
groff -U -dc=n -Tascii -p -t -mm intercal.mm > intercal.refs.tmp
intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
intercal.mm:3069: warning: can't find special character `no'
--
GROFF_NO_SGR=1 groff -U -dc=n -Tascii -p -t -mm intercal.mm >original.txt
intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
intercal.mm:3069: warning: can't find special character `no'
--
groff -U -dc=n -Tps -p -t -mm intercal.mm >intercal.refs.tmp
intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
sed <intercal.refs.tmp -e '/hn \([0-9]*\)\.$/s//hn \1/' >tmp.refs;
--
groff -U -dc=n -Tps -p -t -mm intercal.mm >original.ps
intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
rm -f intercal.refs.qrf intercal.refs.tmp
--
groff -U -dc=y -Tascii -p -t -mm intercal.mm > intercal.refs.tmp
intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
intercal.mm:3115: warning: can't find special character `no'
--
GROFF_NO_SGR=1 groff -U -dc=y -Tascii -p -t -mm intercal.mm >intercal.txt
intercal.mm:30: can't open `intercal.refs.qrf': No such file or directory
intercal.mm:3115: warning: can't find special character `no'
libgdk-pixbuf-2.38.0-alt2
OK: 19
FAIL: 1
SKIP: 0
--
Full log written to
/usr/src/RPM/BUILD/gdk-pixbuf-2.38.0/i586-alt-linux/meson-logs/testlog.txt
FAILED: meson-test
/usr/bin/meson test --no-rebuild --print-errorlogs
mate-document-viewer-1:1.20.2-alt1
checking for gtk+-3.0 gthread-2.0 sm >= 1.0.0... no
configure: error: Package requirements (gtk+-3.0 gthread-2.0 sm >= 1.0.0) were not met:
No package 'sm' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
mplayer-1.3.0-alt2
In file included from stream/stream_smb.c:21:0:
/usr/include/samba-4.0/libsmbclient.h:158:18: error: field 'btime_ts' has incomplete type
struct timespec btime_ts;
/usr/include/samba-4.0/libsmbclient.h:162:18: error: field 'mtime_ts' has incomplete type
struct timespec mtime_ts;
/usr/include/samba-4.0/libsmbclient.h:166:18: error: field 'atime_ts' has incomplete type
struct timespec atime_ts;
/usr/include/samba-4.0/libsmbclient.h:170:18: error: field 'ctime_ts' has incomplete type
struct timespec ctime_ts;
pdf2djvu-0.9.10-alt1.S1
pdf-dpi.cc:89:30: error: invalid conversion from 'const double*' to 'double*'
[-fpermissive]
double *ctm = state->getCTM();
pdf-dpi.cc: In constructor 'pdf::dpi::Guesser::Guesser(pdf::Document&)':
pdf-dpi.cc:99:53: error: invalid new-expression of abstract class type 'DpiGuessDevice'
DpiGuessDevice *guess_device = new DpiGuessDevice();
--
virtual bool interpretType3Chars() = 0;
cc1plus: some warnings being treated as errors
make: *** [<builtin>: pdf-dpi.o] Error 1
--
In file included from pdf-document-map.cc:23:0:
pdf-backend.hh:84:13: error: 'GBool' in namespace '::' does not name a type
typedef ::GBool Bool;
--
from pdf-unicode.cc:15:
pdf-backend.hh:84:13: error: 'GBool' in namespace '::' does not name a type
typedef ::GBool Bool;
--
In file included from pdf-backend.cc:16:0:
pdf-backend.hh:84:13: error: 'GBool' in namespace '::' does not name a type
typedef ::GBool Bool;
pdf-backend.cc: In constructor 'pdf::Environment::Environment()':
pdf-backend.cc:100:50: error: invalid conversion from 'void (*)(void*, ErrorCategory,
pdf::Offset, char*) {aka void (*)(void*, ErrorCategory, long long int, char*)}' to 'void
(*)(void*, ErrorCategory, Goffset, const char*) {aka void (*)(void*, ErrorCategory,
long long int, const char*)}' [-fpermissive]
setErrorCallback(poppler_error_handler, nullptr);
--
pdf-backend.cc: At global scope:
pdf-backend.cc:156:13: error: 'Bool' in namespace 'pdf' does not name a type
static pdf::Bool annotations_callback(pdf::ant::Annotation *annotation, void *user_data)
pdf-backend.cc: In member function 'void pdf::Document::display_page(pdf::Renderer*,
int, double, double, bool, bool)':
pdf-backend.cc:195:16: error: 'annotations_callback' was not declared in this scope
do_links ? annotations_callback : nullptr,
pdf-backend.cc: In member function 'const string pdf::Document::get_xmp()':
pdf-backend.cc:219:35: error: invalid conversion from 'const GooString*' to
'std::unique_ptr<GooString>::pointer {aka GooString*}' [-fpermissive]
mstring.reset(this->readMetadata());
python-module-terminado-0.5-alt1.git20150717.2.1
test_single_process (terminado.tests.basic_test.SingleTermTests) ... ok
test_max_terminals (terminado.tests.basic_test.UniqueTermTests) ... ERROR
test_unique_processes (terminado.tests.basic_test.UniqueTermTests) ... ok
ERROR: test_max_terminals (terminado.tests.basic_test.UniqueTermTests)
Traceback (most recent call last):
--
self.assertEquals(msg[0], 'setup')
TypeError: 'NoneType' object is not subscriptable
-------------------- >> begin captured logging << --------------------
--
terminado.websocket: INFO: TermSocket.open: None
tornado.application: ERROR: Uncaught exception in /unique
Traceback (most recent call last):
--
terminado.websocket: INFO: TermSocket.open: None
tornado.application: ERROR: Uncaught exception in /unique
Traceback (most recent call last):
--
Ran 8 tests in 35.239s
FAILED (errors=1)
scribus-1:1.5.4-alt3
/usr/src/RPM/BUILD/scribus-1.5.4/scribus/plugins/import/pdf/importpdf.cpp: In member
function 'QString PdfPlug::UnicodeParsedString(const GooString*)':
/usr/src/RPM/BUILD/scribus-1.5.4/scribus/plugins/import/pdf/importpdf.cpp:1088:2: error:
'GBool' was not declared in this scope
GBool isUnicode;
--
UBool
/usr/src/RPM/BUILD/scribus-1.5.4/scribus/plugins/import/pdf/importpdf.cpp:1094:3: error:
'isUnicode' was not declared in this scope
isUnicode = gTrue;
--
Unicode
/usr/src/RPM/BUILD/scribus-1.5.4/scribus/plugins/import/pdf/importpdf.cpp:1094:15: error:
'gTrue' was not declared in this scope
isUnicode = gTrue;
--
gfree
/usr/src/RPM/BUILD/scribus-1.5.4/scribus/plugins/import/pdf/importpdf.cpp:1100:3: error:
'isUnicode' was not declared in this scope
isUnicode = gFalse;
--
Unicode
/usr/src/RPM/BUILD/scribus-1.5.4/scribus/plugins/import/pdf/importpdf.cpp:1100:15: error:
'gFalse' was not declared in this scope
isUnicode = gFalse;
--
parse
/usr/src/RPM/BUILD/scribus-1.5.4/scribus/plugins/import/pdf/importpdf.cpp:1106:7: error:
'isUnicode' was not declared in this scope
if (isUnicode)
texlive-2018-alt2_4
outname = srcName.getString()->getCString();
../../../texk/web2c/pdftexdir/pdftosrc.cc:167:69: error: 'gTrue' was not declared in
this scope
str = new EmbedStream(objStr.getStream(), Object(), gTrue, first);
--
gfree
../../../texk/web2c/pdftexdir/pdftosrc.cc:169:50: error: 'gFalse' was not declared in
this scope
parser = new Parser(xref, lexer, gFalse);
12 error logs REMOVED from the list
atlas-3.9.35-alt1.qa1
gettext-0.19.8.1-alt5
golang-github-xiang90-probing-0-alt1_0.6.git07dd2e8
gromacs-4.0.7-alt8
jed-2:0.99.19-alt2.qa2.1
lz4-1:1.8.3-alt1
python-module-joblib-0.11-alt2
quilt-0.65.0.27.0f2a-alt1
sbcl-1.4.12-alt1
sgc-0.2.1-alt1
spl-0.7.11-alt1
subethasmtp-3.1.7-alt1_12jpp8
Total 361 error logs.
Подробная информация о списке рассылки Sisyphus-cybertalk