[cyber] I: Sisyphus-20180313 i586 beehive_status: +22 -23 (517)
ALT beekeeper
hiver на altlinux.org
Вт Мар 13 14:54:58 MSK 2018
22 NEW error logs
OpenAD-20140315-alt3
(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
! LaTeX Error: File `dvips.def' not found.
Type X to quit or <RETURN> to proceed,
asl-1.42-alt2_0.33.bld115
(/usr/share/texmf-dist/tex/latex/base/size12.clo))
! LaTeX Error: File `german.sty' not found.
Type X to quit or <RETURN> to proceed,
atlas-3.9.35-alt1.qa1
/usr/src/RPM/BUILD/ATLAS/BUILD/..//include/atlas_genparse.h:316:95: w
hasher-priv: master: idle time limit (3600 seconds) exceeded
borg-1.1.4-alt1
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 13333: ordinal
not in range(128)
doublecmd-0.8.2-alt1
п╓п╟я┌п╟п╩я▄п╫п╬: (1018) п п╬п╪п©п╦п╩я▐я├п╦я▐ п©я─п╣я─п╡п╟п╫п╟
Error: /usr/bin/ppc386 returned an error exitcode
Error: (lazarus) Compile Project, Mode: Beta, Target:
/usr/src/RPM/BUILD/doublecmd-0.8.2/doublecmd: stopped with exit code 256
Error: (lazbuild) failed compiling of project
/usr/src/RPM/BUILD/doublecmd-0.8.2/src/doublecmd.lpi
emacs-mode-auctex-11.87-alt2
Transcript written on mfput.log.
grep: manfnt.log: No such file or directory
mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input manfnt'
failed to make manfnt.tfm.
fiaif-1.22.1-alt2
(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
! LaTeX Error: File `dvips.def' not found.
Type X to quit or <RETURN> to proceed,
filibpp-3.0.2-alt1
(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
! LaTeX Error: File `dvips.def' not found.
Type X to quit or <RETURN> to proceed,
gforth-0.7.3-alt2
vmgen.texi:686: warning: @pxref node name should not contain `.'
vmgen.texi:1613: warning: @pxref node name should not contain `.'
cp -p kernl32l.fi kernl32l.fi~
cp -p kernl32l.fi- kernl32l.fi
cd doc; makeinfo --html gforth.texi
cd doc; makeinfo --html vmgen.texi
cd doc; texi2dvi gforth.texi
/usr/bin/texi2dvi: TeX neither supports -recorder nor outputs \openout lines in its
log file
make: *** [Makefile:939: doc/gforth.dvi] Error 1
make: Leaving directory '/usr/src/RPM/BUILD/gforth-0.7.3'
gnuplot-1:5.0.3-alt1.2
(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
! LaTeX Error: File `pdftex.def' not found.
Type X to quit or <RETURN> to proceed,
gpsbabel-1.3.6-alt2.qa1
(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
! LaTeX Error: File `dvips.def' not found.
Type X to quit or <RETURN> to proceed,
libtomcrypt-1.18.0-alt1
(/usr/share/texmf-dist/tex/latex/graphics-cfg/color.cfg)
! LaTeX Error: File `dvips.def' not found.
Type X to quit or <RETURN> to proceed,
libtommath-1.0.1.0.97.gitg0bc7551-alt1
(/usr/share/texmf-dist/tex/latex/graphics-cfg/color.cfg)
! LaTeX Error: File `dvips.def' not found.
Type X to quit or <RETURN> to proceed,
linuxdoc-tools-0.9.69-alt2
Installed tree: /usr/src/tmp/linuxdoc-tools-buildroot/usr
Using temporary directory: /usr/src/tmp/ldt.InRjnRSdx5
- Building txt docs
Processing file ./guide
<standard input>:2254: warning [p 1, 226.3i]: can't break line
- Building latex docs
Processing file ./guide
fmt_latex2e::postASP: LaTeX first run problem. Aborting ...
make: *** [Makefile:116: install] Error 1
make: Leaving directory '/usr/src/RPM/BUILD/linuxdoc-tools-0.9.69'
londonlaw-0.3.0-alt2_0.6.pre2
</usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
kpathsea: Running mktexpk --mfmode ljfour --bdpi 8000 --mag 1+760/(2*4000) --dpi
8760 ptmr8r
gsftopk: fatal: map file `psfonts.map' not found.
mktexpk: don't know how to create bitmap font for ptmr8r.
mktexpk: perhaps ptmr8r is missing from the map file.
dvips: Font ptmr8r not found; using cmr10
</usr/share/texmf-dist/fonts/pk/ljfour/public/cm/dpi600/cmr10.pk>
dvips: ! invalid char 150 from font ptmr8r
make: *** [Makefile:5: manual.ps] Error 1
make: Leaving directory '/usr/src/RPM/BUILD/londonlaw-0.3.0_pre2/doc'
lordsawar-0.3.1-alt2
bigmap.cpp: In destructor 'virtual BigMap::~BigMap()':
bigmap.cpp:70:16: error: no match for 'operator==' (operand types are
'Cairo::RefPtr<Cairo::Surface>' and 'bool')
if (buffer == true)
--
rectangle.h:50:13: note: no known conversion for argument 1 from
'Cairo::RefPtr<Cairo::Surface>' to 'const Rectangle&'
bigmap.cpp:73:26: error: no match for 'operator==' (operand types are
'Cairo::RefPtr<Cairo::Surface>' and 'bool')
if (magnified_buffer == true)
--
bigmap.cpp: In member function 'void BigMap::set_view(Rectangle)':
bigmap.cpp:115:16: error: no match for 'operator==' (operand types are
'Cairo::RefPtr<Cairo::Surface>' and 'bool')
if (buffer == true)
--
rectangle.h:50:13: note: no known conversion for argument 1 from
'Cairo::RefPtr<Cairo::Surface>' to 'const Rectangle&'
bigmap.cpp:125:18: error: no match for 'operator==' (operand types are
'Cairo::RefPtr<Cairo::Surface>' and 'bool')
if (outgoing == true)
--
bigmap.cpp: In member function 'void BigMap::draw(Player*, bool)':
bigmap.cpp:177:23: error: no match for 'operator==' (operand types are
'Cairo::RefPtr<Cairo::Surface>' and 'bool')
if (magnified_buffer == true)
make-2:4.2.1-alt2
Caught signal 14!
FAILED (14/15 passed)
features/override ....................................... ok (4 passed)
mydns-1.2.8.32-alt1
~/RPM/BUILD/mydns-1.2.8.32/doc ~/RPM/BUILD/mydns-1.2.8.32
+ make pdf
make: Entering directory '/usr/src/RPM/BUILD/mydns-1.2.8.32/doc'
TEXINPUTS=".:$TEXINPUTS" \
MAKEINFO='makeinfo -I .' \
texi2dvi --pdf --batch --build-dir=mydns.t2p -o mydns.pdf \
`test -f 'mydns.texi' || echo './'`mydns.texi
/usr/bin/texi2dvi: TeX neither supports -recorder nor outputs \openout lines in its
log file
make: *** [Makefile:474: mydns.pdf] Error 1
make: Leaving directory '/usr/src/RPM/BUILD/mydns-1.2.8.32/doc'
ngsolve-6.1-alt1.dev.git20150323.qa1.2
try deleting the output directory and rerun doxygen.
error: problems opening map file
/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_31.map for inclusion in the docs!
If you installed Graphviz/dot after a previous failing run,
try deleting the output directory and rerun doxygen.
error: problems opening map file
/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_32.map for inclusion in the docs!
If you installed Graphviz/dot after a previous failing run,
try deleting the output directory and rerun doxygen.
error: problems opening map file
/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_33.map for inclusion in the docs!
If you installed Graphviz/dot after a previous failing run,
try deleting the output directory and rerun doxygen.
error: problems opening map file
/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_34.map for inclusion in the docs!
If you installed Graphviz/dot after a previous failing run,
try deleting the output directory and rerun doxygen.
error: problems opening map file
/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_35.map for inclusion in the docs!
If you installed Graphviz/dot after a previous failing run,
try deleting the output directory and rerun doxygen.
error: problems opening map file
/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_36.map for inclusion in the docs!
If you installed Graphviz/dot after a previous failing run,
try deleting the output directory and rerun doxygen.
error: problems opening map file
/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_37.map for inclusion in the docs!
If you installed Graphviz/dot after a previous failing run,
try deleting the output directory and rerun doxygen.
error: problems opening map file
/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_38.map for inclusion in the docs!
If you installed Graphviz/dot after a previous failing run,
try deleting the output directory and rerun doxygen.
error: problems opening map file
/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_39.map for inclusion in the docs!
If you installed Graphviz/dot after a previous failing run,
try deleting the output directory and rerun doxygen.
error: problems opening map file
/usr/src/RPM/BUILD/ngsolve-6.1/doxy/html/inherit_graph_40.map for inclusion in the docs!
If you installed Graphviz/dot after a previous failing run,
python-module-fiat-1.6.0-alt1.dev.git20150429
(/usr/share/texmf-dist/tex/latex/graphics-cfg/graphics.cfg)
! LaTeX Error: File `pdftex.def' not found.
Type X to quit or <RETURN> to proceed,
python-module-nbconvert-5.3.1-alt1
E
E ! LaTeX Error: File `load-unicode-data.tex' not found.
E
--
> raise OSError(bytes_to_str(stderr))
E OSError:
/usr/src/RPM/BUILD/python-module-nbconvert-5.3.1/nbconvert/utils/pandoc.py:51:
RuntimeWarning: You are using an old version of pandoc (1.11.1)
E Recommended version is 1.12.1.
tinc-1.0.33-alt1
~/RPM/BUILD/tinc-1.0.33/doc ~/RPM/BUILD/tinc-1.0.33
+ make pdf
make: Entering directory '/usr/src/RPM/BUILD/tinc-1.0.33/doc'
TEXI2PDF tinc.pdf
/usr/bin/texi2dvi: TeX neither supports -recorder nor outputs \openout lines in its
log file
make: *** [Makefile:362: tinc.pdf] Error 1
make: Leaving directory '/usr/src/RPM/BUILD/tinc-1.0.33/doc'
error: Bad exit status from /usr/src/tmp/rpm-tmp.88450 (%build)
RPM build errors:
File /usr/src/RPM/SOURCES/tinc-1.0.33-alt1.patch is smaller than 8 bytes
23 error logs REMOVED from the list
PokerTH-1.1.2-alt1
exim-4.84-alt1.1.1.1.1
ftpproxy-1.2.3-alt4
golang-github-xiang90-probing-0-alt1_0.6.git07dd2e8
kf5-kwin-5.11.5-alt1.S1
libmatemixer-1.20.0-alt1_1
libmateweather-1.20.0-alt1_1
mate-file-manager-actions-1.8.3-alt1_3
mate-panel-1:1.20.0-alt1_2
mate-window-manager-1.20.0-alt1_1
python-module-cinderclient-1:1.11.0-alt1
python-module-novaclient-7.1.2-alt1
python-module-pygame_sdl2-6.99.10.1227-alt2
python-module-scikits.eartho-0.2.1-alt2.git20141231.2
python-module-scikits.optimization-1:0.3-alt3.git20130417
python-module-scipy-1.0.0-alt1
python-module-xlib-0.18-alt1
python-module-yieldfrom.urllib3-0.1.4-alt1
qtcurve-1:1.8.18-alt1.git3d313d5
websec-1.9.0-alt1.1
xcftools-1.0.7-alt1.1
xen-4.10.0-alt4.S1
xymon-4.3.28-alt2
Total 517 error logs.
Подробная информация о списке рассылки Sisyphus-cybertalk