[cyber] I: Sisyphus-20170213 x86_64 beehive_status: +18 -14 (947)
ALT beekeeper
hiver на altlinux.org
Пн Фев 13 14:08:34 MSK 2017
18 NEW error logs
apache-commons-lang-0:2.6-alt5_18jpp8
testNextLong2(org.apache.commons.lang.math.RandomUtilsTest) Time elapsed: 0.007 sec
<<< FAILURE!
junit.framework.AssertionFailedError: mid point chi-square test -- will fail about 1
in 1000 times
at junit.framework.Assert.fail(Assert.java:57)
--
Results :
Failed tests:
org.apache.commons.lang.math.RandomUtilsTest#testNextLong2 mid point chi-squa...
drbd-utils-8.9.0-alt3
# /usr/src/tmp/drbd-utils-buildroot/usr/sbin/drbd-overview: deparse
failed. isPerl=0.0576183233425785.
find-requires: ERROR: /usr/lib/rpm/perl.req failed
error: /bin/sh failed
error: Failed to find Requires
RPM build errors:
kdebindings-3.5.13.2-alt4
/usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope
assert(tmpXSoff >= 0);\
--
DCOP.c:560:17: note: in expansion of macro 'XSRETURN_UNDEF'
/usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope
assert(tmpXSoff >= 0);\
--
DCOP.c: In function 'void XS_DCOP_detach(PerlInterpreter*, CV*)':
/usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope
assert(tmpXSoff >= 0);\
--
DCOP.c:585:17: note: in expansion of macro 'XSRETURN_UNDEF'
/usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope
assert(tmpXSoff >= 0);\
--
DCOP.c: In function 'void XS_DCOP_isAttached(PerlInterpreter*, CV*)':
/usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope
assert(tmpXSoff >= 0);\
--
DCOP.c:610:17: note: in expansion of macro 'XSRETURN_UNDEF'
/usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope
assert(tmpXSoff >= 0);\
--
DCOP.c: In function 'void XS_DCOP_appId(PerlInterpreter*, CV*)':
/usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope
assert(tmpXSoff >= 0);\
--
DCOP.c:704:17: note: in expansion of macro 'XSRETURN_UNDEF'
/usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope
assert(tmpXSoff >= 0);\
--
DCOP.c: In function 'void XS_DCOP_send(PerlInterpreter*, CV*)':
/usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope
assert(tmpXSoff >= 0);\
--
DCOP.c:740:17: note: in expansion of macro 'XSRETURN_UNDEF'
/usr/lib64/perl5/CORE/XSUB.h:330:22: error: 'assert' was not declared in this scope
assert(tmpXSoff >= 0);\
kf5-kwrited-5.8.4-alt1.S1
+ read d
ls: cannot access /usr/src/tmp/kf5-kwrited-buildroot//usr/share/kf5/k*5: No such file
or directory
+ '[' -d /usr/src/tmp/kf5-kwrited-buildroot//usr/share/kf5/lib64 ']'
--
Processing files: kf5-kwrited-5.8.4-alt1.S1
error: File not found: /usr/src/tmp/kf5-kwrited-buildroot/usr/lib/kf5/bin/kwrited
error: File not found:
/usr/src/tmp/kf5-kwrited-buildroot/etc/kf5/xdg/autostart/kwrited-autostart.desktop
Executing(%doc): /bin/sh -e /usr/src/tmp/rpm-tmp.38124
libgupnp-igd-0.2.4-alt1
../../test-driver: line 107: 25266 Segmentation fault "$@" > $log_file 2>&1
FAIL: gupnp-simple-igd
make[5]: Entering directory `/usr/src/RPM/BUILD/gupnp-igd-0.2.4/tests/gtest'
--
# SKIP: 0
# XFAIL: 0
# FAIL: 1
# XPASS: 0
# ERROR: 0
See tests/gtest/test-suite.log
librados2-perl-1.0.3-alt1
<13>Feb 13 02:08:12 rpmi: pve-cluster-4.0.48-alt7 1481276723 installed
error reading information on service pve-cluster: No such file or directory
<13>Feb 13 02:08:12 rpmi: python-modules-hotshot-2.7.11-alt3 1460726088 installed
--
+ make DESTDIR=/usr/src/tmp/librados2-perl-buildroot install
make: dpkg-architecture: Command not found
make: Entering directory `/usr/src/RPM/BUILD/librados2-perl-1.0.3'
cat: .git/refs/heads/master: No such file or directory
make: Entering directory `/usr/src/RPM/BUILD/librados2-perl-1.0.3'
--
Can't locate PVE.pm in @INC (you may need to install the PVE module) (@INC
contains: /usr/lib/rpm /usr/src/tmp/librados2-perl-buildroot/usr/lib64/perl5
/usr/src/tmp/librados2-perl-buildroot/usr/share/perl5
/usr/src/tmp/librados2-perl-buildroot/usr/lib64/perl5
/usr/src/tmp/librados2-perl-buildroot/usr/share/perl5 /usr/lib64/perl5
/usr/share/perl5 /usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl
/usr/local/lib64/perl/5.24 /usr/local/share/perl/5.24 /usr/lib64/perl5 /usr/share/perl5
/usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .).
BEGIN failed--compilation aborted.
# /usr/src/tmp/librados2-perl-buildroot/usr/share/perl5/PVE/RADOS.pm: deparse
failed. prefix=/usr/src/tmp/librados2-perl-buildroot/usr/share/perl5
find-requires: ERROR: /usr/lib/rpm/perl.req failed
error: /bin/sh failed
error: Failed to find Requires
RPM build errors:
mumble-1.2.8-alt2.1.1
g++ -c -include release/mumble -pipe -pipe -Wall -g -O2 -fpermissive
-Wfatal-errors -fvisibility=hidden -Wshadow -Woverloaded-virtual -Wold-style-cast
-Wconversion -Wsign-compare -Wextra -O2 -Wall -W -D_REENTRANT -DQT_WEBKIT
-DPLUGIN_PATH=/usr/lib64/mumble -DDEFAULT_SOUNDSYSTEM=PulseAudio -DRESTRICT=__restrict__
-D_FORTIFY_SOURCE=2 -DMUMBLE_VERSION_STRING=1.2.8 -DMUMBLE -DNO_CRASH_REPORT
-DUSE_OPUS -DUSE_ALSA -DUSE_PULSEAUDIO -DUSE_BONJOUR -DUSE_DBUS -DUSE_SPEECHD
-DNO_UPDATE_CHECK -DUSING_BUNDLED_QT_TRANSLATIONS -D_REENTRANT -DQT_NO_DEBUG
-DQT_SVG_LIB -DQT_SQL_LIB -DQT_XML_LIB -DQT_GUI_LIB -DQT_NETWORK_LIB -DQT_CORE_LIB
-DQT_SHARED -I/usr/share/qt4/mkspecs/linux-g++ -I. -I/usr/include/qt4/QtCore
-I/usr/include/qt4/QtNetwork -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtXml
-I/usr/include/qt4/QtSql -I/usr/include/qt4/QtSvg -I/usr/include/qt4
-I/usr/include/qt4/QtDBus -I../../src -I. -I../bonjour -I/usr/include/speex
-I../../celt-0.7.0-src/libcelt -Irelease -I/usr/include/opus -I/usr/include/alsa
-I/usr/include/avahi-compat-libdns_sd -I/usr/include/speech-dispatcher/speech-dispatcher
-I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I. -o release/TextToSpeech_unix.o
TextToSpeech_unix.cpp
TextToSpeech_unix.cpp:36:24: fatal error: libspeechd.h: No such file or directory
#include <libspeechd.h>
opm-wh_nagios-2.3-alt2
Compilation failed in require at
/usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib/OPM/WhNagios.pm line 97.
BEGIN failed--compilation aborted at
/usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib/OPM/WhNagios.pm line 97.
# perl(OPM/WhNagios/Nagios.pm) at line 97 (depth 3) not loaded at BEGIN SKIP
--
Compilation failed in require at
/usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib/OPM/WhNagios.pm line 97.
BEGIN failed--compilation aborted at
/usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib/OPM/WhNagios.pm line 97.
# perl(OPM/WhNagios/Nagios.pm) at line 97 (depth 3) not loaded at BEGIN SKIP
# /usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib/OPM/WhNagios.pm:
deparse failed. prefix=/usr/src/tmp/opm-wh_nagios-buildroot/usr/share/opm-core/ui/lib
find-requires: ERROR: /usr/lib/rpm/perl.req failed
error: /bin/sh failed
error: Failed to find Requires
RPM build errors:
perl-Debug-Client-0.29-alt2
t/07-initialize.t ..... ok
# Failed test 'STDERR is empty'
# at t/08-io.t line 61.
# got: 'Can't figure out your console, using stdin: No such file or directory
# expected: ''
# Failed test 'STDERR has Two'
# at t/08-io.t line 77.
# got: 'Can't figure out your console, using stdin: No such file or directory
# Two
# expected: 'Two
# Failed test 'STDERR has Two'
# at t/08-io.t line 93.
# got: 'Can't figure out your console, using stdin: No such file or directory
# Two
--
t/08-io.t (Wstat: 768 Tests: 12 Failed: 3)
Failed tests: 6, 9, 12
Non-zero exit status: 3
--
Result: FAIL
Failed 1/32 test programs. 3/181 subtests failed.
make: *** [test_dynamic] Error 255
perl-Filter-Simple-0.91-alt1
Result: FAIL
Failed 3/6 test programs. 0/11 subtests failed.
make: *** [test_dynamic] Error 255
perl-Net-Ping-2.56-alt1
t/150_syn_inst.t ...... ok
# Failed test 'Make sure it died for a good excuse'
# at t/190_alarm.t line 51.
--
t/190_alarm.t (Wstat: 256 Tests: 6 Failed: 1)
Failed test: 6
Non-zero exit status: 1
--
Result: FAIL
Failed 1/16 test programs. 1/67 subtests failed.
make: *** [test_dynamic] Error 255
perl-PDF-API2-2.031-alt1
PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e"
"undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
# Failed test 'use PDF::API2::UniWrap;'
# at t/00-all-usable.t line 30.
# Tried to use 'PDF::API2::UniWrap'.
# Error: Can't locate Unicode/UCD.pm in @INC (you may need to install the
Unicode::UCD module) (@INC contains: /usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib
/usr/src/RPM/BUILD/PDF-API2-2.031/blib/arch /usr/local/lib64/perl/5.24
/usr/local/share/perl/5.24 /usr/lib64/perl5 /usr/share/perl5
/usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at
/usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib/PDF/API2/UniWrap.pm line 18.
# BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib/PDF/API2/UniWrap.pm line 18.
# Compilation failed in require at t/00-all-usable.t line 30.
# BEGIN failed--compilation aborted at t/00-all-usable.t line 30.
# Failed test 'use PDF::API2::Resource::Font::SynFont;'
# at t/00-all-usable.t line 30.
# Tried to use 'PDF::API2::Resource::Font::SynFont'.
# Error: Can't locate Unicode/UCD.pm in @INC (you may need to install the
Unicode::UCD module) (@INC contains: /usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib
/usr/src/RPM/BUILD/PDF-API2-2.031/blib/arch /usr/local/lib64/perl/5.24
/usr/local/share/perl/5.24 /usr/lib64/perl5 /usr/share/perl5
/usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at
/usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib/PDF/API2/Resource/Font/SynFont.pm line 11.
# BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/PDF-API2-2.031/blib/lib/PDF/API2/Resource/Font/SynFont.pm line 11.
# Compilation failed in require at t/00-all-usable.t line 30.
# BEGIN failed--compilation aborted at t/00-all-usable.t line 30.
# Looks like you failed 2 tests of 103.
--
t/00-all-usable.t (Wstat: 512 Tests: 103 Failed: 2)
Failed tests: 12, 44
Non-zero exit status: 2
--
Result: FAIL
Failed 1/34 test programs. 2/505 subtests failed.
make: *** [test_dynamic] Error 255
perl-Test-Block-0.13-alt1
t/bad_args.t ....... ok
# Failed test 'too few tests'
# at t/block.t line 22.
# STDERR is:
# # Failed test 'block 2 expected 2 test(s) and ran 1'
# # at t/block.t line 20.
--
# as expected
# Failed test 'too many tests'
# at t/block.t line 34.
# STDERR is:
# # Failed test 'block 3 expected 1 test(s) and ran 2'
# # at t/block.t line 32.
--
# as expected
# Failed test 'named block'
# at t/block.t line 65.
# STDERR is:
# # Failed test 'block 'foo' expected 2 test(s) and ran 1'
# # at t/block.t line 63.
--
t/import.t ......... ok
# Failed test '$Test::Block::Plan'
# at t/variable.t line 23.
# STDERR is:
# # Failed test 'block 'inner' expected 1 test(s) and ran 0'
# # at /usr/share/perl5/Tie/Scalar.pm line 157.
--
t/block.t (Wstat: 0 Tests: 6 Failed: 3)
Failed tests: 2-3, 6
t/variable.t (Wstat: 0 Tests: 1 Failed: 1)
Failed test: 1
Files=6, Tests=26, 1 wallclock secs ( 0.05 usr 0.01 sys + 0.32 cusr 0.04 csys =
0.42 CPU)
pve-docs-4.4.1-alt1
<13>Feb 13 07:24:42 rpmi: dlm-4.0.5-alt1 1473898277 installed
error reading information on service dlm: No such file or directory
<13>Feb 13 07:24:42 rpmi: clvm-2.02.168-alt1 1481122714 installed
--
<13>Feb 13 07:24:43 rpmi: pve-cluster-4.0.48-alt7 1481276723 installed
error reading information on service pve-cluster: No such file or directory
<13>Feb 13 07:24:43 rpmi: pve-access-control-4.0.19-alt7 1481276723 installed
--
<13>Feb 13 07:24:43 rpmi: pve-firewall-2.0.33-alt4 1481539806 installed
error reading information on service pve-firewall: No such file or directory
error reading information on service pvefw-logger: No such file or directory
<13>Feb 13 07:24:43 rpmi: pve-ha-manager-1.0.38-alt4 1481539806 installed
--
<13>Feb 13 07:24:43 rpmi: pve-manager-4.4.1-alt4 1481539806 installed
error reading information on service pvedaemon: No such file or directory
error reading information on service pveproxy: No such file or directory
error reading information on service pvestatd: No such file or directory
error reading information on service spiceproxy: No such file or directory
<13>Feb 13 07:24:43 rpmi: asciidoc-a2x-8.6.9-alt1 1386063340 installed
--
+ make
cat: .git/refs/heads/master: No such file or directory
make: dpkg-architecture: Command not found
make: Entering directory `/usr/src/RPM/BUILD/pve-docs-4.4.1'
pve-manager-4.4.1-alt4
+ make
make: dpkg-architecture: Command not found
make: Entering directory `/usr/src/RPM/BUILD/pve/pve-manager'
cat: .git/refs/heads/master: No such file or directory
make: Entering directory `/usr/src/RPM/BUILD/pve/pve-manager'
pve-storage-4.0.70-alt1
<13>Feb 13 03:52:40 rpmi: pve-cluster-4.0.48-alt7 1481276723 installed
error reading information on service pve-cluster: No such file or directory
<13>Feb 13 03:52:40 rpmi: pve-access-control-4.0.19-alt7 1481276723 installed
--
+ make DESTDIR=/usr/src/tmp/pve-storage-buildroot install
cat: .git/refs/heads/master: No such file or directory
make: Entering directory `/usr/src/RPM/BUILD/pve-storage'
telepathy-rakia-0.8.0-alt1
raise error.CannotListenError(self.interface, self.port, le)
twisted.internet.error.CannotListenError: Couldn't listen on any:9829: [Errno 98]
Address already in use.
FAIL: voip/calltest.py (1)
Testing voip/ringing-queued.py ...
vargus-0.9.7-alt1
# /usr/src/tmp/vargus-buildroot/usr/bin/vargus: deparse failed. isPerl=0.040982019698473.
find-requires: ERROR: /usr/lib/rpm/perl.req failed
error: /bin/sh failed
error: Failed to find Requires
RPM build errors:
14 error logs REMOVED from the list
Mayavi-4.4.0-alt1.git20150422
boswars-2.6.1-alt1.1.qa1
eiskaltdcpp-2.2.8-alt1.qa2
ff-clone-1.1-alt2
fillets-ng-1.0.1-alt1
geany-plugins-1.28-alt1
jvgs-0.5-alt2
love7-0.7.2-alt2
love8-0.8.0-alt2
perl-HTML-FormFu-MultiForm-1.00-alt1
powdertoy-1:91.5.330-alt1
premake-4.3-alt1
stone_soup-0.18.1-alt1
verlihub-plugins-lua51-1.8.1-alt1.qa1.1
Total 947 error logs.
Подробная информация о списке рассылки Sisyphus-cybertalk