[cyber] I: Sisyphus-20120928 x86_64 beehive_status: +15 -15 (274)
ALT beekeeper
hiver ÎÁ altlinux.org
ðÔ óÅÎ 28 18:14:08 MSK 2012
15 NEW error logs
collectd-5.1.0-alt5
>.pod2man.tmp.$$ 2>/dev/null && mv -f .pod2man.tmp.$$ collectd.conf.5 || true
collectd.conf.5 has some POD errors!
make[3]: *** [collectd.conf.5] Error 1
make[3]: Leaving directory `/usr/src/RPM/BUILD/collectd-5.1.0/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/usr/src/RPM/BUILD/collectd-5.1.0/src'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/usr/src/RPM/BUILD/collectd-5.1.0/src'
make: *** [all-recursive] Error 1
make: Leaving directory `/usr/src/RPM/BUILD/collectd-5.1.0'
maui-3.3-alt1
x86_64-alt-linux-gcc -I../../include/ -I/var/spool/maui/include -D__LINUX -D__MPBS
-pipe -Wall -g -O2 -D__M64 -c MPBSI.c
MPBSI.c:177:12: error: conflicting types for 'get_svrport'
/usr/include/pbs_ifl.h:686:14: note: previous declaration of 'get_svrport' was here
MPBSI.c:178:12: error: conflicting types for 'openrm'
/usr/include/pbs_ifl.h:687:5: note: previous declaration of 'openrm' was here
munin-1.4.5-alt3
mv /usr/src/tmp/munin-buildroot/usr/share/munin/plugins/*.adv
/usr/src/tmp/munin-buildroot/usr/share/munin
mv: cannot stat '/usr/src/tmp/munin-buildroot/usr/share/munin/plugins/*.adv': No such
file or directory
make: [install-plugins-prime] Error 1 (ignored)
--
Can't locate CGI/Fast.pm in @INC (@INC contains: /usr/lib/rpm
/usr/src/tmp/munin-buildroot/usr/share/perl5 /usr/src/tmp/munin-buildroot/usr/share/perl5
/usr/lib64/perl5 /usr/share/perl5 /usr/lib64/perl5 /usr/share/perl5
/etc/perl5 /usr/lib/perl5/vendor_perl /usr/local/lib64/perl/5.16
/usr/local/share/perl/5.16 /usr/lib64/perl5 /usr/share/perl5
/usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl) at
/usr/src/tmp/munin-buildroot/usr/share/munin/www/cgi/munin-fastcgi-graph line 33.
BEGIN failed--compilation aborted at
/usr/src/tmp/munin-buildroot/usr/share/munin/www/cgi/munin-fastcgi-graph line 33.
# perl(CGI/Fast.pm) at line 33 (depth 3) not loaded at BEGIN SKIP
# /usr/src/tmp/munin-buildroot/usr/share/munin/www/cgi/munin-fastcgi-graph: deparse
failed. isPerl=0.0430881585811163.
find-requires: ERROR: /usr/lib/rpm/perl.req failed
error: /bin/sh failed
error: Failed to find Requires
RPM build errors:
perl-Algorithm-CheckDigits-0.50-alt2.1
t/pod-coverage.t .. ok
# Failed test 'POD test for blib/lib/Algorithm/CheckDigits/MBase_002.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Algorithm/CheckDigits/MBase_002.pm (80): Non-ASCII character seen before
=encoding in 'BZÜ'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Algorithm/CheckDigits/MXX_003.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Algorithm/CheckDigits/MXX_003.pm (145): Non-ASCII character seen before
=encoding in 'diëder'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Algorithm/CheckDigits/M11_004.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Algorithm/CheckDigits/M11_004.pm (93): Non-ASCII character seen before
=encoding in 'Título'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Algorithm/CheckDigits/M11_006.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Algorithm/CheckDigits/M11_006.pm (84): Non-ASCII character seen before
=encoding in 'Código'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Algorithm/CheckDigits/MXX_006.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
--
t/pod.t (Wstat: 1280 Tests: 44 Failed: 5)
Failed tests: 14, 16, 20-21, 35
Non-zero exit status: 5
--
Result: FAIL
Failed 1/9 test programs. 5/536 subtests failed.
make: *** [test_dynamic] Error 255
perl-Class-Std-0.11-alt1.1
t/pod-coverage.t ....... ok
# Failed test 'POD test for blib/lib/Class/Std.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
--
t/pod.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
--
Result: FAIL
Failed 1/16 test programs. 1/277 subtests failed.
perl-Data-Structure-Util-0.15-alt3
+ _perl_vendor_MM_build
+ : looking for PREREQ dependencies
+ /usr/bin/perl Makefile.PL PRINT_PREREQ=1
+ tee .perl.req
perl(Digest::MD5)>=0 perl(Scalar::Util)>=1.01 perl(Test::More)>=0 perl(Test::Pod)>=0
perl(Test::Simple)>=0
+ : writing Makefile
+ /usr/bin/perl Makefile.PL PREFIX=/usr INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Can't parse Makefile fragment at Makefile.PL line 50.
perl-Dist-Zilla-4.300006-alt1
BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Dist/Zilla/Prereqs.pm line 10.
Compilation failed in require at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Dist/Zilla.pm line 26.
BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Dist/Zilla.pm line 26.
Compilation failed in require at /usr/lib64/perl5/Moose/Exporter.pm line 382.
Compilation failed in require at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Test/DZil.pm line 9.
BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Test/DZil.pm line 9.
Compilation failed in require at t/plugins/prunes.t line 7.
BEGIN failed--compilation aborted at t/plugins/prunes.t line 7.
t/plugins/prunes.t ...........
--
Can't locate CPAN/Meta/Prereqs.pm in @INC (@INC contains:
t/lib /usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/arch
/usr/local/lib64/perl/5.16 /usr/local/share/perl/5.16 /usr/lib64/perl5
/usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Dist/Zilla/Prereqs.pm line 10.
BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Dist/Zilla/Prereqs.pm line 10.
Compilation failed in require at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Dist/Zilla.pm line 26.
BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Dist/Zilla.pm line 26.
Compilation failed in require at /usr/lib64/perl5/Moose/Exporter.pm line 382.
Compilation failed in require at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Test/DZil.pm line 9.
BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Test/DZil.pm line 9.
Compilation failed in require at t/plugins/readme.t line 8.
BEGIN failed--compilation aborted at t/plugins/readme.t line 8.
t/plugins/readme.t ...........
--
Can't locate CPAN/Meta/Prereqs.pm in @INC (@INC
contains: /usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/arch /usr/local/lib64/perl/5.16
/usr/local/share/perl/5.16 /usr/lib64/perl5 /usr/share/perl5
/usr/lib64/perl5 /usr/share/perl5 /etc/perl5 /usr/lib/perl5/vendor_perl .) at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Dist/Zilla/Prereqs.pm line 10.
BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Dist/Zilla/Prereqs.pm line 10.
Compilation failed in require at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Dist/Zilla.pm line 26.
BEGIN failed--compilation aborted at
/usr/src/RPM/BUILD/Dist-Zilla-4.300006/blib/lib/Dist/Zilla.pm line 26.
Compilation failed in require at /usr/lib64/perl5/Moose/Exporter.pm line 382.
perl-IPC-ShareLite-0.17-alt2
+ _perl_vendor_MM_build
+ : looking for PREREQ dependencies
+ /usr/bin/perl Makefile.PL PRINT_PREREQ=1
+ tee .perl.req
perl(File::Spec)>=0 perl(Test::More)>=0
+ : writing Makefile
+ /usr/bin/perl Makefile.PL PREFIX=/usr INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Can't parse Makefile fragment at Makefile.PL line 58.
perl-Mail-Transport-Dbx-0.07-alt3
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
# Failed test 'POD test for blib/lib/Mail/Transport/Dbx.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
--
t/0_pod.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
--
Result: FAIL
Failed 1/6 test programs. 1/60 subtests failed.
make: *** [test_dynamic] Error 255
perl-Net-Packet-3.27-alt1
t/01-pod-coverage.t ............ ok
# Failed test 'POD test for blib/lib/Net/Packet.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Net/Packet.pm (72): Non-ASCII character seen before =encoding in
'# Build'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Net/Packet/SLL.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Net/Packet/SLL.pm (119): Non-ASCII character seen before =encoding in
'# Build'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Net/Packet/RAW.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Net/Packet/RAW.pm (62): Non-ASCII character seen before =encoding in
'# Build'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Net/Packet/ARP.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Net/Packet/ARP.pm (155): Non-ASCII character seen before =encoding in
'# Build'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Net/Packet/Layer7.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Net/Packet/Layer7.pm (76): Non-ASCII character seen before =encoding in
'# Build'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Net/Packet/NULL.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Net/Packet/NULL.pm (91): Non-ASCII character seen before =encoding in
'# Build'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Net/Packet/IPv4.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Net/Packet/IPv4.pm (287): Non-ASCII character seen before =encoding in
'# Build'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Net/Packet/TCP.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Net/Packet/TCP.pm (309): Non-ASCII character seen before =encoding in
'# Build'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Net/Packet/ETH.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
# blib/lib/Net/Packet/ETH.pm (140): Non-ASCII character seen before =encoding in
'# Build'. Assuming ISO8859-1
# Failed test 'POD test for blib/lib/Net/Packet/Frame.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
perl-Perl-PrereqScanner-1.009-alt1
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
# Failed test 'extends "Foo::Bar" => { -version => "4.3.2" }, "Foo::Baz" => { -version
=> 2.44894 };'
# at t/autoprereq.t line 21.
--
# $expected->{Foo::Bar} = '4.3.2'
# Failed test 'extends "Foo::Bar" => { -version => "4.3.2" }, "Foo::Baz" => { -version
=> 2.44894 };'
# at t/autoprereq.t line 30.
--
# $expected->{Foo::Bar} = '4.3.2'
# Failed test 'extends "Foo::Bar" => { -version => "4.3.2" }, "Foo::Baz" => { -version
=> 2.44894 };'
# at t/autoprereq.t line 42.
--
# $expected->{Foo::Bar} = '4.3.2'
# Failed test 'with "With::Single" => { -excludes => "method", -version => "1.1.1" },
"With::Double";'
# at t/autoprereq.t line 21.
--
# $expected->{With::Single} = '1.1.1'
# Failed test 'with "With::Single" => { -excludes => "method", -version => "1.1.1" },
"With::Double";'
# at t/autoprereq.t line 30.
--
# $expected->{With::Single} = '1.1.1'
# Failed test 'with "With::Single" => { -excludes => "method", -version => "1.1.1" },
"With::Double";'
# at t/autoprereq.t line 42.
--
# $expected->{With::Single} = '1.1.1'
# Failed test 'with "With::Single" => { -wow => { -wow => { a => b } }, -version =>
"1.1.1" }, "With::Double";'
# at t/autoprereq.t line 21.
--
# $expected->{With::Single} = '1.1.1'
# Failed test 'with "With::Single" => { -wow => { -wow => { a => b } }, -version =>
"1.1.1" }, "With::Double";'
# at t/autoprereq.t line 30.
--
# $expected->{With::Single} = '1.1.1'
# Failed test 'with "With::Single" => { -wow => { -wow => { a => b } }, -version =>
"1.1.1" }, "With::Double";'
# at t/autoprereq.t line 42.
--
# $expected->{With::Single} = '1.1.1'
# Failed test 'with "With::Single" => { -exclude => "method", -version => "1.1.1" },
# "With::Double" => { -exclude => "foo" };'
perl-XML-Tidy-1.12-alt1
+ /usr/bin/perl Build test
# Failed test 'POD test for blib/lib/XML/Tidy.pm'
# at /usr/share/perl5/Test/Pod.pm line 182.
--
t/00pod.t (Wstat: 256 Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 1
--
Result: FAIL
Failed 1/6 test programs. 1/63 subtests failed.
rpm-4.0.4-alt100.56
/usr/lib64/gcc/x86_64-alt-linux/4.6.3/../../../../lib64/libselinux.a(load_policy.o):
In function `selinux_mkload_policy':
/usr/src/RPM/BUILD/libselinux-2.1.12/src/load_policy.c:159: undefined reference to
`sepol_policy_kern_vers_max'
/usr/src/RPM/BUILD/libselinux-2.1.12/src/load_policy.c:160: undefined reference to
`sepol_policy_kern_vers_min'
/usr/src/RPM/BUILD/libselinux-2.1.12/src/load_policy.c:206: undefined reference to
`sepol_policy_file_create'
/usr/src/RPM/BUILD/libselinux-2.1.12/src/load_policy.c:208: undefined reference to
`sepol_policydb_create'
/usr/src/RPM/BUILD/libselinux-2.1.12/src/load_policy.c:212: undefined reference to
`sepol_policy_file_set_mem'
/usr/src/RPM/BUILD/libselinux-2.1.12/src/load_policy.c:213: undefined reference to
`sepol_policydb_read'
/usr/src/RPM/BUILD/libselinux-2.1.12/src/load_policy.c:218: undefined reference to
`sepol_policydb_set_vers'
/usr/src/RPM/BUILD/libselinux-2.1.12/src/load_policy.c:219: undefined reference to
`sepol_policydb_to_image'
/usr/src/RPM/BUILD/libselinux-2.1.12/src/load_policy.c:224: undefined reference to
`sepol_policy_file_free'
/usr/src/RPM/BUILD/libselinux-2.1.12/src/load_policy.c:225: undefined reference to
`sepol_policydb_free'
selinux-policy-2.20101213-alt1.fc3.9.13.1
<13>Sep 28 12:39:46 rpmi: selinux-policy-2.20101213-alt1.fc3.9.13.1 installed
cat: /proc/self/mounts: No such file or directory
System will relabel on next boot
--
+ make clean
cat: /selinux/policyvers: No such file or directory
make: Entering directory `/usr/src/RPM/BUILD/serefpolicy-2.20101213-alt1.fc3.9.13.1'
spamassassin-3.3.2-alt1
/usr/bin/perl build/mkrules --exit_on_no_src --src rulesrc --out rules --manifest
MANIFEST --manifestskip MANIFEST.SKIP
no source directory found: exiting
/usr/bin/perl build/preprocessor -Mvars -DVERSION="3.003002" -DPREFIX="/usr"
-DDEF_RULES_DIR="/usr/share/spamassassin" -DLOCAL_RULES_DIR="/etc/spamassassin"
-DLOCAL_STATE_DIR="/var/lib/spamassassin" -DINSTALLSITELIB="/usr/share/perl5"
-DCONTACT_ADDRESS="the administrator of that system" -Msharpbang -Mconditional
-DPERL_BIN="/usr/bin/perl" -DPERL_WARN="" -DPERL_TAINT="" -m755 -isa-update.raw -osa-update
/bin/cp -p sa-update blib/script/sa-update
/usr/bin/perl -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/sa-update
Modification of non-creatable array value attempted, subscript -1 at
/usr/share/perl5/Pod/Man.pm line 268.
Manifying blib/man1/sa-compile.1
Manifying blib/man1/spamc.1
make: *** [manifypods] Error 255
make: Leaving directory `/usr/src/RPM/BUILD/Mail-SpamAssassin-3.3.2'
15 error logs REMOVED from the list
R-base-2.15.1-alt1
TORCS-1.3.0-alt6
cfdg-2.2-alt3.1
cmake-2.8.9-alt1
directfb-1.1.0-alt4
eviacam-1.5.4-alt1
gdk-pixbuf-0.22.0-alt10.1
gnome-libs-1.4.2-alt11.1
imlib-1.9.15-alt4
jboss-dmr-1.1.1-alt1_6jpp7
mldonkey-3.1.0-alt1.1
mx4j-0:3.0.2-alt1_1jpp6
native2ascii-maven-plugin-1.0-alt1_0.2.beta1jpp7
policycoreutils-2.0.85-alt3
python-module-telepathy-0.15.19-alt1.1
Total 274 error logs.
ðÏÄÒÏÂÎÁÑ ÉÎÆÏÒÍÁÃÉÑ Ï ÓÐÉÓËÅ ÒÁÓÓÙÌËÉ Sisyphus-cybertalk