[ALTSP] Пропали локальные usb накопители
Alex Bar
sasbar at gmail.com
Fri Nov 19 11:31:56 UTC 2010
Помог, помог.
Вот лог от dmesg
Прикрепил вложением.
19 ноября 2010 г. 14:27 пользователь Lenar Shakirov <shakirov �� cg.ru>написал:
> 19.11.2010 14:08, Alex Bar пишет:
>
>> Сделал
>>
> <skip>
>
> З.Ы. Как перекинуть файл из локальной консоли в терминальную?
>> Может бредово выразился, но , надеюсь, что меня поняли.
>>
>>
> scp не помог? :)
>
>
>
----------- ????????? ????? -----------
???????? ? ??????? HTML ???? ???????...
URL: <http://lists.altlinux.org/pipermail/ltsp-server/attachments/20101119/745935f6/attachment.html>
----------- ????????? ????? -----------
Linux version 2.6.22-led-tc-alt11 (builder �� apiary.armor.altlinux.org) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt1)) #1 Thu Feb 28 06:44:04 MSK 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007eae000 (usable)
BIOS-e820: 0000000007eae000 - 0000000008000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
126MB LOWMEM available.
Entering add_active_range(0, 0, 32430) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 32430
early_node_map[1] active PFN ranges
0: 0 -> 32430
On node 0 totalpages: 32430
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 221 pages used for memmap
Normal zone: 28113 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP 000FD790, 0014 (r0 DELL )
ACPI: RSDT 000FD7A4, 0028 (r1 DELL GX100 7 ASL 61)
ACPI: FACP 000FD7CC, 0074 (r1 DELL GX100 7 ASL 61)
ACPI: DSDT FFFE5000, 1801 (r1 DELL dt_ex 1000 MSFT 100000B)
ACPI: FACS 07EAE000, 0040
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 10000000 (gap: 08000000:f7b00000)
Built 1 zonelists. Total pages: 32177
Kernel command line: BOOT_IMAGE=vmlinuz ro initrd=initrd.img root=/dev/nfs nfsroot=/var/lib/ltsp/i586,udp ip=dhcp
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Detected 598.233 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 124020k/129720k available (1980k kernel code, 5160k reserved, 662k data, 200k init, 0k highmem, 0k BadRAM)
virtual kernel memory layout:
fixmap : 0xffff7000 - 0xfffff000 ( 32 kB)
vmalloc : 0xc8800000 - 0xffff5000 ( 887 MB)
lowmem : 0xc0000000 - 0xc7eae000 ( 126 MB)
.init : 0xc0398000 - 0xc03ca000 ( 200 kB)
.data : 0xc02ef048 - 0xc0394a7c ( 662 kB)
.text : 0xc0100000 - 0xc02ef048 (1980 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1197.98 BogoMIPS (lpj=1995173)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel Celeron (Coppermine) stepping 06
Checking 'hlt' instruction... OK.
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 4e00)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc0ce, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *14
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 4 of device 0000:00:1f.2
PCI: Cannot allocate resource region 4 of device 0000:00:1f.1
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0x100000-0xffffff could not be reserved
pnp: 00:00: iomem range 0x1000000-0x7eadfff could not be reserved
pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
Time: tsc clocksource has been installed.
pnp: 00:0d: ioport range 0x800-0x85f has been reserved
pnp: 00:0d: ioport range 0xc00-0xc7f has been reserved
pnp: 00:0d: ioport range 0x860-0x8ff could not be reserved
PCI: Bridge: 0000:00:1e.0
IO window: f000-ffff
MEM window: fd000000-feffffff
PREFETCH window: 10000000-100fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 907k freed
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler cfq registered (default)
Boot video device is 0000:00:01.0
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
isapnp: Scanning for PnP cards...
Switched to NOHz mode on CPU #0
isapnp: No Plug & Play device found
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:0a activated.
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: Device 00:0b activated.
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 200k freed
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
3c59x: Donald Becker and others.
0000:01:0c.0: 3Com PCI 3c905C Tornado at c880cc00.
eth0: setting full-duplex.
agpgart: Detected an Intel i810 Chipset.
input: PC Speaker as /class/input/input2
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0xf8000000
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
i810_smbus 0000:00:01.0: i810/i815 i2c device found.
SCSI subsystem initialized
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
i801_smbus 0000:00:1f.3: Enabling SMBus device
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 11, io base 0x00001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
libata version 2.21 loaded.
ata_piix 0000:00:1f.1: version 2.11
PCI: Enabling device 0000:00:1f.1 (0000 -> 0001)
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
pnp: Device 00:0c activated.
parport_pc 00:0c: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
scsi1 : ata_piix
ata1: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011020 irq 14
ata2: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011028 irq 15
ata1: port disabled. ignoring.
ata2: port disabled. ignoring.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usb 1-2: new low speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1f.2-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel �� redhat.com
tsdev (compaq touchscreen emulation) is scheduled for removal.
See Documentation/feature-removal-schedule.txt for details.
usb 1-1: new full speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver libusual
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 0 CCS
usb-storage: device scan complete
sd 2:0:0:0: [sda] 3911680 512-byte hardware sectors (2003 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] 3911680 512-byte hardware sectors (2003 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
usb 1-1: USB disconnect, address 3
usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-1: new full speed USB device using uhci_hcd and address 5
usb 1-1: new full speed USB device using uhci_hcd and address 6
usb 1-1: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
scsi 3:0:0:0: Direct-Access silicon-power PMAP PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: [sda] 3911680 512-byte hardware sectors (2003 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sda] Assuming drive cache: write through
sd 3:0:0:0: [sda] 3911680 512-byte hardware sectors (2003 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 3:0:0:0: [sda] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
More information about the Ltsp-server
mailing list