[Hardware] LSI SAS1064E

[Anton Gorlov]

Доброго дня всем.

Озадачился тут мониторингом  SAS дисков.. и обнаружил что почти на всех
серверах с указанным контроллером (Logic SAS1064ET)

на портах есть ECC ошибки. Причём даже на заведомо новых дисках. В dmesg
ругани на сколько вижу нет,в отличие от smartctl.

Вот например сервер недавно только включил и поставил новый диск.

===

Vendor:               IBM-ESXS
Product:              ST9146853SS    
Revision:             B63E
User Capacity:        146,814,976,000 bytes [146 GB]
Logical block size:   512 bytes
Logical Unit id:      0x5000c500548d2f2b
Serial number:        6XM10X530000B2509A5R
Device type:          disk
Transport protocol:   SAS
Local Time is:        Thu Jun 23 16:46:47 2016 MSK
Device supports SMART and is Enabled
Temperature Warning Enabled
SMART Health Status: OK

Current Drive Temperature:     39 C
Drive Trip Temperature:        65 C
Elements in grown defect list: 0
Vendor (Seagate) cache information
  Blocks sent to initiator = 0
Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 2.32
  number of minutes until next internal SMART test = 34

Error counter log:
           Errors Corrected by           Total   Correction    
Gigabytes    Total
               ECC          rereads/    errors   algorithm     
processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9
bytes]  errors
read:    6021031        0         0   6021031          0         
0.030           0
write:         0        0         0         0          0       
150.153           0
verify:   145317        0         0    145317          0         
0.057           0

Non-medium error count:        0
No self-tests have been logged
Long (extended) Self Test duration: 1099 seconds [18.3 minutes]