[Hardware] TV-tuner Eline TV-master

[Yakov Reztsov]

> 
> Linux version 2.6.18-std-smp-alt8 (builder на hint1.office.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Mon Sep 24 01:41:06 MSD 2007

Какая версия операционной системы ?


> bttv0: Bt878 (rev 17) at 0000:01:08.0, irq: 209, latency: 32, mmio: 0xd2000000
> bttv0: using: Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26 [card=8,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=00f4ff00 [init]
> bttv0: FlyVideo Radio=yes RemoteControl=yes Tuner=5 gpio=0xf4ff00
> bttv0: FlyVideo  LR90=no  tda9821/tda9820=no  capture_only=no 
> bttv0: using tuner=5
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> bttv0: i2c: checking for TDA9887 @ 0x86... not found
> bt878: Unknown symbol bttv_read_gpio
> bt878: Unknown symbol bttv_write_gpio
> bt878: Unknown symbol bttv_gpio_enable


похоже проблема с модулем bt878, а не настройками
 
 не обновляли версию ядра с 2.6.18-std-smp-alt7 (Desktop 4.0) на 2.6.18-std-smp-alt8 ?


> tuner 2-0061: Setting mode_mask to 0x0e
> tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw])
> tuner 2-0061: Calling set_type_addr for type=5, addr=0xff, mode=0x0e
> tuner 2-0061: set addr for type -1
> tuner 2-0061: tuner 0x61: called during i2c_client register by adapter's attach_inform
> tuner 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
> tuner 2-0061: bt878 #0 [sw] tuner I2C addr 0xc2 with type 5 used for 0x0e
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: registered device radio0
> bttv0: PLL: 28636363 => 35468950 .. ok
> tuner 2-0061: Cmd VIDIOC_S_STD accepted for analog TV
> tuner 2-0061: switching to v4l2
> tuner 2-0061: tv freq set to 400.00
> tuner 2-0061: tv: param 0, range 1
> tuner 2-0061: Freq= 400.00 MHz, V_IF=38.93 MHz, Offset=0.00 MHz, div=7023
> tuner 2-0061: tv 0x1b 0x6f 0x8e 0x90