[Hardware] Прошу помощи(спутниковый интернет ассиметричный доступ)

[petr kh]

 Здравствуйте!
Можно ли настроить ассиметричный доступ в интернет в altLinux3.0C?

Что имею: спутник yamal201, канл Raduga, 

 [root на localhost root]# lsmod | grep skystar
skystar2               28676  0
dvb_core               77736  2 skystar2,b2c2_flexcop
mt352                   6660  2 skystar2,b2c2_flexcop
stv0299                11016  2 skystar2,b2c2_flexcop
nxt2002                 8708  2 skystar2,b2c2_flexcop
firmware_class          9984  3 skystar2,b2c2_flexcop,nxt2002
mt312                   7812  2 skystar2,b2c2_flexcop
i2c_core               21008  8 skystar2,b2c2_flexcop,mt352,stv02

# dmseg
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 22
DVB: registering new adapter (FlexCop Digital TV device).
b2c2-flexcop: MAC address = 00:d0:d7:10:c9:07
  
b2c2-flexcop: found the stv0299 at i2c address: 0x68
DVB: registering frontend 0 (ST STV0299 DVB-S)...
b2c2-flexcop: initialization of 'SkyStar 2 DVB-S' at the 'PCI' bus controlled by 
a 'FlexCopIIb' complete
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 20
sk98lin: Network Device Driver v8.23.1.3
(C)Copyright 1999-2005 Marvell(R).
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 20

# mplayer
soundwrapper: Execute "/usr/bin/mplayer" via aoss
MPlayer 1.0pre7-RPM-3.4.3 (C) 2000-2005 MPlayer Team
CPU: Intel Pentium 4/Xeon/Celeron Foster (Family: 8, Stepping: 9)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection.


85 audio & 196 video codecs
Usage:   mplayer [options] [url|path/]filename

Basic options: (complete list in the man page)
 -vo <drv[:dev]>  select video output driver & device ('-vo help' for a list)
 -ao <drv[:dev]>  select audio output driver & device ('-ao help' for a list)
 vcd://<trackno>   play (S)VCD (Super Video CD) track (raw device, no mount)
 dvd://<titleno>   play DVD title from device instead of plain file
 -alang/-slang    select DVD audio/subtitle language (by 2-char country code)
 -ss <timepos>    seek to given (seconds or hh:mm:ss) position
 -nosound         do not play sound
 -fs              fullscreen playback (or -vm, -zoom, details in the man page)
 -x <x> -y <y>    set display resolution (for use with -vm or -zoom)
 -sub <file>      specify subtitle file to use (also see -subfps, -subdelay)
 -playlist <file> specify playlist file
 -vid x -aid y    select video (x) and audio (y) stream to play
 -fps x -srate y  change video (x fps) and audio (y Hz) rate
 -pp <quality>    enable postprocessing filter (details in the man page)
 -framedrop       enable frame dropping (for slow machines)

Basic keys: (complete list in the man page, also check input.conf)
 <-  or  ->       seek backward/forward 10 seconds
 up or down       seek backward/forward  1 minute
 pgup or pgdown   seek backward/forward 10 minutes
 < or >           step backward/forward in playlist
 p or SPACE       pause movie (press any key to continue)
 q or ESC         stop playing and quit program
 + or -           adjust audio delay by +/- 0.1 second
 o                cycle OSD mode:  none / seekbar / seekbar + timer
 * or /           increase or decrease PCM volume
 z or x           adjust subtitle delay by +/- 0.1 second
 r or t           adjust subtitle position up/down, also see -vf expand

 * * * SEE THE MAN PAGE FOR DETAILS, FURTHER (ADVANCED) OPTIONS AND KEYS * * *

      В руководствах все написано (например: Спутниковый интернет на SkyStar1 и SkyStar2 
под Linux
Автор: Денис Евстигнеев 
Оригинал: carpenter.bofh.ru ), но без помощи мне не обойтись.
Может быть подскажете куда (к кому) обратиться.

С уважением Петр.