[Hardware] nvidia & resolution more than 800x600

Владимир Черный black на altlinux.ru
Вт Авг 14 11:13:07 MSD 2007


Скорее всего у вас линки не туда смотрят
Посмотрите и поправьте руками все линки из /etc/X11/lib_nvidia
и /etc/X11/lib
Чтобы было примерно так:
/etc/X11/lib_nvidia
nvidia.xinf -> /usr/lib/nvidia_1.0.9631/nvidia.xinf
libGLcore.so.1 -> /usr/lib/nvidia_1.0.9631/libGLcore.so.1
libnvidia-cfg.so.1 -> /usr/lib/nvidia_1.0.9631/libnvidia-cfg.so.1
libnvidia-tls.so.1 -> /usr/lib/nvidia_1.0.9631/libnvidia-tls-tls.so.1
libNVIDIAXvMC.so -> /usr/lib/nvidia_1.0.9631/libNVIDIAXvMC.so
libXvMCNVIDIA_dynamic.so.1 ->
/usr/lib/nvidia_1.0.9631/libXvMCNVIDIA_dynamic.so.1
nvidia_drv.so -> /usr/lib/nvidia_1.0.9631/nvidia_drv.so
/etc/X11/lib
libGL.so.1 -> /usr/lib/nvidia_1.0.9631/libGL.so.1
libglx.so -> /usr/lib/nvidia_1.0.9631/libglx.so

естественно, все это для драйвера nvidia

Успехов!

2007/8/14, Eugene Prokopiev <prokopiev на stc.donpac.ru>:
> Здравствуйте!
>
> Есть машина с бранчем 4.0 и такой видеокартой:
>
> # lspci | grep VGA
> 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX
> - nForce GPU] (rev a3)
>
> Требуется добиться от нее разрешения большего, чем 800x600 (1024х768
> вполне бы устроило), можно на свободном драйвере, т.к. 3D не нужно.
>
> Сгенерированный конфиг (X -configure):
>
> Section "ServerLayout"
>          Identifier     "X.org Configured"
>          Screen      0  "Screen0" 0 0
>          InputDevice    "Mouse0" "CorePointer"
>          InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
>          RgbPath      "/usr/share/X11/rgb"
>          ModulePath   "/usr/lib/X11/modules"
>          FontPath     "/usr/share/fonts/bitmap/misc/"
> EndSection
>
> Section "Module"
>          Load  "dbe"
>          Load  "record"
>          Load  "extmod"
>          Load  "dri"
>          Load  "GLcore"
>          Load  "glx"
>          Load  "xtrap"
> EndSection
>
> Section "InputDevice"
>          Identifier  "Keyboard0"
>          Driver      "kbd"
> EndSection
>
> Section "InputDevice"
>          Identifier  "Mouse0"
>          Driver      "mouse"
>          Option      "Protocol" "auto"
>          Option      "Device" "/dev/input/mice"
>          Option      "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
>          Identifier   "Monitor0"
>          VendorName   "Monitor Vendor"
>          ModelName    "Monitor Model"
> EndSection
>
> Section "Device"
>          ### Available Driver options are:-
>          ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>          ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>          ### [arg]: arg optional
>          #Option     "SWcursor"                  # [<bool>]
>          #Option     "HWcursor"                  # [<bool>]
>          #Option     "NoAccel"                   # [<bool>]
>          #Option     "ShadowFB"                  # [<bool>]
>          #Option     "UseFBDev"                  # [<bool>]
>          #Option     "Rotate"                    # [<str>]
>          #Option     "VideoKey"                  # <i>
>          #Option     "FlatPanel"                 # [<bool>]
>          #Option     "FPDither"                  # [<bool>]
>          #Option     "CrtcNumber"                # <i>
>          #Option     "FPScale"                   # [<bool>]
>          #Option     "FPTweak"                   # <i>
>          #Option     "DualHead"                  # [<bool>]
>          Identifier  "Card0"
>          Driver      "nv"
>          VendorName  "nVidia Corporation"
>          BoardName   "NV18 [GeForce4 MX - nForce GPU]"
>          BusID       "PCI:1:0:0"
> EndSection
>
> Section "Screen"
>          Identifier "Screen0"
>          Device     "Card0"
>          Monitor    "Monitor0"
>          SubSection "Display"
>                 Viewport   0 0
>                 Depth     1
>          EndSubSection
>          SubSection "Display"
>                 Viewport   0 0
>                 Depth     4
>          EndSubSection
>          SubSection "Display"
>                 Viewport   0 0
>                 Depth     8
>          EndSubSection
>          SubSection "Display"
>                 Viewport   0 0
>                 Depth     15
>          EndSubSection
>          SubSection "Display"
>                 Viewport   0 0
>                 Depth     16
>          EndSubSection
>          SubSection "Display"
>                 Viewport   0 0
>                 Depth     24
>          EndSubSection
> EndSection
>
> С ним X запускаются и работают, но:
>
> $ xrandr
> Screen 0: minimum 320 x 240, current 800 x 600, maximum 800 x 600
> default connected 800x600+0+0 0mm x 0mm
>     800x600        60.0*    56.0
>     640x480        60.0
>     400x300        60.0     56.0
>     320x240        60.0
>
> Если в конфиге nv заменить на nvidia, то при старте Х получим:
>
> xauth: (argv):1:  bad display name "myhost.mydomain.com:0" in "list" command
> xauth: (argv):1:  bad display name "myhost.mydomain.com:0" in "add" command
> X Window System Version 7.3.0
> Release Date: 19 April 2007
> X Protocol Version 11, Revision 0, Release 7.3
> Build Operating System: Linux 2.6.18-std-smp-alt6 i686 ALT Linux
> Current Operating System: Linux myhost.mydomain.com 2.6.18-std-smp-alt6
> #1 SMP Sun Apr 29 00:41:18 MSD 2007 i686
> Build Date: 09 June 2007
>          Before reporting problems, check https://bugzilla.altlinux.org/
>          to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
>          (++) from command line, (!!) notice, (II) informational,
>          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 14 09:37:32 2007
> (==) Using config file: "/etc/X11/xorg.conf"
> (EE) LoadModule: Module nvidia does not have a nvidiaModuleData data object.
> (EE) Failed to load module "nvidia" (invalid module, 0)
> (EE) No drivers available.
>
> Fatal server error:
> no screens found
>
> XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
>        after 0 requests (0 known processed) with 0 events remaining.
> xauth: (argv):1:  bad display name "myhost.mydomain.com:0" in "remove"
> command
>
> Что установлено:
>
> $ rpm -qa | grep nvidia
> nvidia_glx_common-100.14.11-alt31
> nvidia-settings-1.0-alt7
> kernel-modules-nvidia_legacy_96xx-std-smp-1.0.9639-alt0.M40.132626.6
> nvidia-xconfig-1.0-alt7
> nvidia_glx_legacy_96xx_1.0.9639-1.0.9639-alt29.M40.1
>
> Как бороться?
>
> --
> С уважением,
> Прокопьев Евгений
> _______________________________________________
> Hardware mailing list
> Hardware на lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/hardware


-- 
С уважением,
Владимир Черный
Начальник отдела образовательных проектов ALT Linux
mailto: black at altlinux.ru
Jabber: black at altlinux.org
ICQ: 199158712


Подробная информация о списке рассылки Hardware