[Hardware] дохнет контроллер
Anton Gorlov
stalker на altlinux.ru
Вт Июл 11 13:26:13 MSD 2006
В 4 раз накренился 1 из серваков...пока на плову..но.
Вопрос - какова вероятность что дохнет контроллер
00:10.0 Unknown mass storage controller: Promise Technology, Inc. 20265
(rev 02)
И будет ли под мастером работать a-142 sil 0680 ata/133?
Просто чтобыф срчоно поднять другой сервер свободного железа не
оказалось по закону подлости
hde: dma_timer_expiry: dma status == 0x21
hde: error waiting for DMA
hde: dma timeout retry: status=0x50 { DriveReady SeekComplete }
hde: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hde: read_intr: error=0x04 { DriveStatusError }
PDC202XX: Primary channel reset.
PDC202XX: Secondary channel reset.
ide2: reset: master: error (0x00?)
blk: queue c0304288, I/O limit 4095Mb (mask 0xffffffff)
hde: dma_timer_expiry: dma status == 0x21
hde: error waiting for DMA
hde: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }
hde: dma_timer_expiry: dma status == 0x21
hde: error waiting for DMA
hde: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }
hde: dma_timer_expiry: dma status == 0x21
hde: error waiting for DMA
hde: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }
hdg: dma_timer_expiry: dma status == 0x21
hdg: error waiting for DMA
hdg: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }
blk: queue c03046dc, I/O limit 4095Mb (mask 0xffffffff)
hdg: dma_timer_expiry: dma status == 0x21
hdg: error waiting for DMA
hdg: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }
hdg: dma_timer_expiry: dma status == 0x21
hdg: error waiting for DMA
hdg: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }
hdg: dma_timer_expiry: dma status == 0x21
hdg: error waiting for DMA
hdg: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }
hdg: irq timeout: status=0xd0 { Busy }
PDC202XX: Secondary channel reset.
PDC202XX: Primary channel reset.
ide3: reset: master: error (0x00?)
Смарт.
smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SP1604N
Serial Number: S013J20XC94650
Firmware Version: TM100-30
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Tue Jul 11 12:23:18 2006 MSD
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity was
never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (6000) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 100) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0007 100 100 025 Pre-fail
Always - 2048
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 59
5 Reallocated_Sector_Ct 0x0033 100 100 011 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail
Offline - 0
9 Power_On_Half_Minutes 0x0032 099 099 000 Old_age
Always - 6696h+25m
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 44
194 Temperature_Celsius 0x0022 151 124 000 Old_age Always
- 29
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 81107
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 051 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 100 100 051 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
--
np: silence ( Winamp ушел в Партизаны ;-)
Подробная информация о списке рассылки Hardware