[Hardware] Re: Звук на Laptop Amilo v2040
Dmytro Kovalskyy
D.Kovalskyy на enamine.net
Вт Фев 14 16:41:28 MSK 2006
В сообщении от Вторник 14 Февраль 2006 15:20 Michael Shigorin написал(a):
> On Mon, Feb 13, 2006 at 03:39:53PM +0300, Anton Farygin wrote:
> > On Mon, 13 Feb 2006 13:38:05 +0200, Dmytro Kovalskyy wrote:
> > > А чем я могу помочь стране, чтоб это произошло быстрее?
> >
> > Повесить багу в upstream ?
>
> Дим, давай сюда lspci и что ещё, если аккаунт некогда завести.
реально некогда :0)
вывожу что есть
[dikov на dnote dikov]$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xb0000000 irq 16
[dikov на dnote dikov]$ lspci -vvx
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express
Processor to DRAM Controller (rev 04)
Subsystem: Wistron Corp.: Unknown device 4047
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>
00: 86 80 90 25 06 01 90 20 04 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 17 47 40
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
0000:00:02.0 VGA compatible controller: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller (rev 04) (prog-if 00 [VGA])
Subsystem: Wistron Corp.: Unknown device 2071
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b0080000 (32-bit, non-prefetchable)
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at b0040000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <available only to root>
00: 86 80 92 25 07 00 90 00 04 00 00 03 00 00 80 00
10: 00 00 08 b0 01 18 00 00 08 00 00 c0 00 00 04 b0
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 17 71 20
30: 00 00 00 00 d0 00 00 00 00 00 00 00 0a 01 00 00
0000:00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics Controller (rev 04)
Subsystem: Wistron Corp.: Unknown device 2071
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at 20000000 (32-bit, non-prefetchable) [disabled]
Capabilities: <available only to root>
00: 86 80 92 27 00 00 90 00 04 00 80 03 00 00 80 00
10: 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 17 71 20
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00
0000:00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
High Definition Audio Controller (rev 04)
Subsystem: Wistron Corp.: Unknown device 2017
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0000000 (64-bit, non-prefetchable)
Capabilities: <available only to root>
00: 86 80 68 26 06 00 10 00 04 00 03 04 08 00 00 00
10: 04 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 17 17 20
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, cache line size 08
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: b4000000-b7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d3f00000
Expansion ROM at 00002000 [disabled] [size=4K]
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
00: 86 80 60 26 07 00 10 00 04 00 04 06 08 00 81 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 20 20 00 20
20: 00 b4 f0 b7 01 d0 f1 d3 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 04 00
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
Subsystem: Wistron Corp.: Unknown device 10a5
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
00: 86 80 58 26 05 00 80 02 04 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 18 00 00 00 00 00 00 00 00 00 00 c0 17 a5 10
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI])
Subsystem: Wistron Corp.: Unknown device 10a5
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1840 [size=32]
00: 86 80 59 26 05 00 80 02 04 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 18 00 00 00 00 00 00 00 00 00 00 c0 17 a5 10
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI])
Subsystem: Wistron Corp.: Unknown device 10a5
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
00: 86 80 5a 26 05 00 80 02 04 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 61 18 00 00 00 00 00 00 00 00 00 00 c0 17 a5 10
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI])
Subsystem: Wistron Corp.: Unknown device 10a5
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
00: 86 80 5b 26 05 00 80 02 04 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 18 00 00 00 00 00 00 00 00 00 00 c0 17 a5 10
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI])
Subsystem: Wistron Corp.: Unknown device 10a6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at b0004000 (32-bit, non-prefetchable)
Capabilities: <available only to root>
00: 86 80 5c 26 06 01 90 02 04 20 03 0c 00 00 00 00
10: 00 40 00 b0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 17 a6 10
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
(prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=06, subordinate=07, sec-latency=216
I/O behind bridge: 00003000-00003fff
Memory behind bridge: b8000000-b80fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
00: 86 80 48 24 07 01 10 00 d4 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 06 07 d8 30 30 80 22
20: 00 b8 00 b8 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 04 00
0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge (rev 04)
Subsystem: Wistron Corp.: Unknown device 4045
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 86 80 41 26 07 00 00 02 04 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 17 45 40
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Wistron Corp.: Unknown device 4043
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1810 [size=16]
00: 86 80 6f 26 05 00 88 02 04 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 11 18 00 00 00 00 00 00 00 00 00 00 c0 17 43 40
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00
0000:00:1f.2 Class 0106: Intel Corporation 82801FBM (ICH6M) SATA Controller
(rev 04) (prog-if 01)
Subsystem: Wistron Corp.: Unknown device 4042
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 18c8
Region 1: I/O ports at 18c0 [size=4]
Region 2: I/O ports at 18a8 [size=8]
Region 3: I/O ports at 180c [size=4]
Region 4: I/O ports at 18b0 [size=16]
Region 5: Memory at b0004400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <available only to root>
00: 86 80 53 26 07 00 b0 02 04 01 06 01 00 00 00 00
10: c9 18 00 00 c1 18 00 00 a9 18 00 00 0d 18 00 00
20: b1 18 00 00 00 44 00 b0 00 00 00 00 c0 17 42 40
30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 02 00 00
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller (rev 04)
Subsystem: Wistron Corp.: Unknown device 4041
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 18e0 [size=32]
00: 86 80 6a 26 01 01 80 02 04 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: e1 18 00 00 00 00 00 00 00 00 00 00 c0 17 41 40
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00
0000:06:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev
05)
Subsystem: Intel Corporation: Unknown device 2702
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 6000ns max), cache line size 08
Interrupt: pin A routed to IRQ 20
Region 0: Memory at b8006000 (32-bit, non-prefetchable)
Capabilities: <available only to root>
00: 86 80 20 42 16 01 90 02 05 00 80 02 08 20 00 00
10: 00 60 00 b8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 02 27
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 03 18
0000:06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet (rev 10)
Subsystem: Wistron Corp.: Unknown device 1094
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max), cache line size 08
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 3000
Region 1: Memory at b8007000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00: ec 10 69 81 17 01 b0 02 10 00 00 02 08 20 00 00
10: 01 30 00 00 00 70 00 b8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 17 94 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 20 40
0000:06:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 20
Interrupt: pin A routed to IRQ 22
Region 0: Memory at b8008000 (32-bit, non-prefetchable)
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
00: 4c 10 31 80 07 00 10 02 00 00 07 06 20 a8 82 00
10: 00 80 00 b8 a0 00 00 02 06 07 0a b0 00 00 40 20
20: 00 f0 7f 20 00 00 80 20 00 f0 bf 20 00 40 00 00
30: fc 40 00 00 00 44 00 00 fc 44 00 00 0a 01 c0 05
0000:06:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394
Host Controller (prog-if 10 [OHCI])
Subsystem: Wistron Corp.: Unknown device 3007
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 22
Region 0: Memory at b8007800 (32-bit, non-prefetchable)
Region 1: Memory at b8000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>
00: 4c 10 32 80 16 01 10 02 00 10 00 0c 08 20 80 00
10: 00 78 00 b8 00 00 00 b8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 17 07 30
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 02 04
0000:06:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated
FlashMedia Controller
Subsystem: Wistron Corp.: Unknown device 3007
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 57 (1750ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b8004000 (32-bit, non-prefetchable)
Capabilities: <available only to root>
00: 4c 10 33 80 06 01 10 02 00 00 80 01 08 39 80 00
10: 00 40 00 b8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 17 07 30
30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 07 04
0000:06:09.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621,
PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
Subsystem: Wistron Corp.: Unknown device 3007
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 57 (1750ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at b8009400 (32-bit, non-prefetchable)
Region 1: Memory at b8009000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at b8007400 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
00: 4c 10 34 80 06 01 10 02 00 00 05 08 08 39 80 00
10: 00 94 00 b8 00 90 00 b8 00 74 00 b8 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 c0 17 07 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 0a 01 07 04
[dikov на dnote dikov]$ cat /proc/asound/card0/codec#0
Codec: Analog Devices AD1986A
Address: 0
Vendor Id: 0x11d41986
Subsystem Id: 0x0
Revision Id: 0x100400
Default PCM: rates 0x07f, bits 0x0e, types 0x1
Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Default Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM: rates 0x060, bits 0x02, types 0x5
Connection: 2
0x01* 0x06
Node 0x03 [Audio Output] wcaps 0x445: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x94 0x94
Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x94 0x94
Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x94 0x94
Node 0x06 [Audio Input] wcaps 0x100511: Stereo
PCM: rates 0x07f, bits 0x06, types 0x1
Connection: 1
0x12
Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 8
0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x08 [Audio Mixer] wcaps 0x200108: Mono
Connection: 1
0x07
Node 0x09 [Audio Mixer] wcaps 0x200106: Mono Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: 0x80
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x80
Connection: 2
0x04 0x05
Node 0x0a [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x07* 0x04 0x05
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x07* 0x04
Node 0x0c [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x04* 0x07
Node 0x0d [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x05* 0x08
Node 0x0e [Audio Selector] wcaps 0x300100: Mono
Connection: 2
0x08* 0x11
Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: 0x00 0x00
Connection: 8
0x1f* 0x20 0x1d 0x1d 0x27 0x28 0x29 0x2a
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x20* 0x1c 0x1f
Node 0x11 [Audio Selector] wcaps 0x300941: Stereo
Connection: 2
0x0f* 0x2b
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: 0x80 0x80
Connection: 6
0x11* 0x22 0x10 0x07 0x08 0x23
Node 0x13 [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x80 0x80
Connection: 1
0x11
Node 0x14 [Audio Selector] wcaps 0x300104: Mono Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x80
Connection: 1
0x23
Node 0x15 [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x1c 0x1c
Connection: 1
0x22
Node 0x16 [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x80 0x80
Connection: 1
0x21
Node 0x17 [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x80 0x80
Connection: 1
0x10
Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: 0x89
Connection: 2
0x19* 0x24
Node 0x19 [Beep Generator Widget] wcaps 0x700200: Mono Digital
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x17 0x17
Pincap 0x081f: OUT HP
Pin Default 0x01813030: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x0a
Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x90 0x90
Pincap 0x081001f: OUT HP
Pin Default 0x01014011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x0b
Node 0x1c [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x90 0x90
Pincap 0x0837: IN OUT
Pin Default 0x9933f170: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Other
Pin-ctls: 0x40: OUT
Connection: 1
0x0c
Node 0x1d [Pin Complex] wcaps 0x40098d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x94 0x91
Pincap 0x081737: IN OUT
Pin Default 0x99f3f115: [Fixed] Other at Int ATAPI
Conn = ATAPI, Color = Other
Pin-ctls: 0x40: OUT
Connection: 1
0x0d
Node 0x1e [Pin Complex] wcaps 0x40018c: Mono Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: 0x00
Pincap 0x0810: OUT
Pin Default 0x901700f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x1f [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081727: IN
Pin Default 0x02a190f0: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Node 0x20 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x081727: IN
Pin Default 0x018130f0: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Node 0x21 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0827: IN
Pin Default 0x409700f0: [N/A] Aux at Ext N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x22 [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x0820: IN
Pin Default 0x903300f0: [Fixed] CD at Int N/A
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x23 [Pin Complex] wcaps 0x400080: Mono
Pincap 0x0820: IN
Pin Default 0x40b700f0: [N/A] Telephony at Ext N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x24 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x50f700f0: [N/A] Other at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x014500f0: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Unknown
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x26 [Power Widget] wcaps 0x500500: Mono
Connection: 8
0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18
Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1f 0x1d
Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1f 0x20
Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo
Connection: 2
0x1d 0x20
Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo
Connection: 3
0x1f 0x1d 0x20
Node 0x2b [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x0f
--
-----------------------------------------------------
Dmytro Kovalskyy, PhD D.Kovalskyy на enamine.net
Molecular Modelling Group Leader tel.: +38 044 537 32 18
Enamine ltd. fax : +38 044 537 32 53
23, Matrosova str.
01103 Kiev, Ukraine
Подробная информация о списке рассылки Hardware