[Hardware] HDD again

Andriy Dobrovol's'kii dobr на iop.kiev.ua
Вт Мар 29 21:22:00 MSD 2005


Anton Farygin wrote:
> Andriy Dobrovol's'kii wrote:
> 
>> Vadim V. Zhytnikov wrote:
>>
>>>>
>>>
>>> А что говорит S.M.A.R.T. ?
>>>
>>>
>> Научите как узнать?
> 
> 
> apt-get install smartmontools
> smartctl -a /dev/hda
> 
smartctl -a /dev/hda
smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG SV4002H
Serial Number:    0379J1FT137559
Firmware Version: QP100-07
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 1
Local Time is:    Tue Mar 29 20:12:43 2005 EEST

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual 
for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection 
activity was
                                         never started.
                                         Auto Offline Data 
Collection: Disabled.
Self-test execution status:      (   0) The previous self-test 
routine completed                                        without 
error or no self-test has ever
                                         been run.
Total time to complete Offline
data collection:                 (1560) seconds.
Offline data collection
capabilities:                    (0x1b) SMART execute Offline immediate.
                                         Auto Offline data 
collection on/off support.
                                         Suspend Offline collection 
upon new
                                         command.
                                         Offline surface scan supported.
                                         Self-test supported.
                                         No Conveyance Self-test 
supported.
                                         No Selective Self-test 
supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                         power-saving mode.
                                         Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                         No General Purpose Logging 
support.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   8) minutes.

SMART Attributes Data Structure revision number: 9
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE 
UPDATED  WHEN_FAILED RAW_VALUE
   1 Raw_Read_Error_Rate     0x000a   253   253   000    Old_age 
Always       -       0
   4 Start_Stop_Count        0x0032   100   100   000    Old_age 
Always       -       1
   5 Reallocated_Sector_Ct   0x0033   253   253   009    Pre-fail 
Always       -       0
   7 Seek_Error_Rate         0x000b   253   253   051    Pre-fail 
Always       -       0
   8 Seek_Time_Performance   0x0024   253   253   000    Old_age 
Offline      -       0
   9 Power_On_Hours          0x0032   100   100   000    Old_age 
Always       -       571849
  12 Power_Cycle_Count       0x0032   100   100   000    Old_age 
Always       -       1
194 Temperature_Celsius     0x0022   148   148   000    Old_age 
Always       -       30
197 Current_Pending_Sector  0x0033   253   253   009    Pre-fail 
Always       -       0
198 Offline_Uncorrectable   0x0031   253   253   009    Pre-fail 
Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   253   253   000    Old_age 
Always       -       0
200 Multi_Zone_Error_Rate   0x000b   100   100   051    Pre-fail 
Always       -       0
201 Soft_Read_Error_Rate    0x000b   253   253   051    Pre-fail 
Always       -       0

SMART Error Log Version: 1
Warning: ATA error count 123 inconsistent with error log pointer 1

ATA Error Count: 123 (device log contains only the most recent five 
errors)
         CR = Command Register [HEX]
         FR = Features Register [HEX]
         SC = Sector Count Register [HEX]
         SN = Sector Number Register [HEX]
         CL = Cylinder Low Register [HEX]
         CH = Cylinder High Register [HEX]
         DH = Device/Head Register [HEX]
         DC = Device Command Register [HEX]
         ER = Error register [HEX]
         ST = Status register [HEX]
Timestamp = decimal seconds since the previous disk power-on.
Note: timestamp "wraps" after 2^32 msec = 49.710 days.

Error 123 occurred at disk power-on lifetime: 4765 hours
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   04 88 00 00 4f c2 e0

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
   -- -- -- -- -- -- -- --   ---------  --------------------
   b0 da 00 00 4f c2 e0 00 4272224.296  SMART RETURN STATUS
   ca 00 80 b7 e4 10 e4 00 4272224.296  WRITE DMA
   ec 00 00 bd 81 a4 e0 00 4272224.296  IDENTIFY DEVICE
   c8 00 30 8e 81 a4 e1 00 4272224.296  READ DMA
   c8 00 88 be 81 a4 e1 00 4272224.296  READ DMA

Error 122 occurred at disk power-on lifetime: 4763 hours
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   04 88 00 00 4f c2 e0

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
   -- -- -- -- -- -- -- --   ---------  --------------------
   b0 da 00 00 4f c2 e0 00 4263500.296  SMART RETURN STATUS
   c8 00 20 df 32 0f e4 00 4263500.296  READ DMA
   c8 00 18 bf 32 0f e4 00 4263500.296  READ DMA
   c8 00 08 16 72 5a e1 00 4263500.296  READ DMA
   ec 00 00 bd 81 a4 e0 00 4263500.296  IDENTIFY DEVICE

Error 121 occurred at disk power-on lifetime: 4640 hours
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   40 88 08 8f e1 0d e4   8 sectors at LBA = 0x040de18f = 68018575

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
   -- -- -- -- -- -- -- --   ---------  --------------------
   c8 00 08 8f e1 0d e4 00 4266667.296  READ DMA
   c8 00 40 7f e1 0d e4 00 4266625.296  READ DMA
   c8 00 28 7e 33 49 e1 00 4266625.296  READ DMA
   c8 00 10 66 33 49 e1 00 4266625.296  READ DMA
   c8 00 08 56 33 49 e1 00 4266625.296  READ DMA

Error 120 occurred at disk power-on lifetime: 4640 hours
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   40 88 10 87 e1 0d e4   16 sectors at LBA = 0x040de187 = 68018567

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
   -- -- -- -- -- -- -- --   ---------  --------------------
   c8 00 10 87 e1 0d e4 00 4266666.296  READ DMA
   c8 00 30 8f e1 0d e4 00   30332.000  READ DMA
   a1 00 05 01 00 00 a0 00       5.000  IDENTIFY PACKET DEVICE
   ec 00 05 01 00 00 b0 00       5.000  IDENTIFY DEVICE
   a1 00 05 01 00 00 b0 00       5.000  IDENTIFY PACKET DEVICE

Error 119 occurred at disk power-on lifetime: 4640 hours
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   40 88 18 7f e1 0d e4

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
   -- -- -- -- -- -- -- --   ---------  --------------------
   b0 d5 01 01 4f c2 e0 00 4272246.296  SMART READ LOG
   b0 d1 01 01 4f c2 e0 00 4272246.296  SMART READ ATTRIBUTE 
THRESHOLDS [OBS-4]
   b0 d0 01 00 4f c2 e0 00 4272246.296  SMART READ DATA
   ca 00 08 5f e5 10 e4 00 4272246.296  WRITE DMA
   b0 da 00 00 4f c2 00 00 4272246.296  SMART RETURN STATUS

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

smartctl -a /dev/hda
smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG SV4002H
Serial Number:    0379J1FT137559
Firmware Version: QP100-07
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 1
Local Time is:    Tue Mar 29 20:18:28 2005 EEST

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual 
for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection 
activity was
                                         never started.
                                         Auto Offline Data 
Collection: Disabled.
Self-test execution status:      (   0) The previous self-test 
routine completed                                        without 
error or no self-test has ever
                                         been run.
Total time to complete Offline
data collection:                 (1560) seconds.
Offline data collection
capabilities:                    (0x1b) SMART execute Offline immediate.
                                         Auto Offline data 
collection on/off support.
                                         Suspend Offline collection 
upon new
                                         command.
                                         Offline surface scan supported.
                                         Self-test supported.
                                         No Conveyance Self-test 
supported.
                                         No Selective Self-test 
supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                         power-saving mode.
                                         Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                         No General Purpose Logging 
support.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   8) minutes.

SMART Attributes Data Structure revision number: 9
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE 
UPDATED  WHEN_FAILED RAW_VALUE
   1 Raw_Read_Error_Rate     0x000a   253   253   000    Old_age 
Always       -       0
   4 Start_Stop_Count        0x0032   100   100   000    Old_age 
Always       -       1
   5 Reallocated_Sector_Ct   0x0033   253   253   009    Pre-fail 
Always       -       0
   7 Seek_Error_Rate         0x000b   253   253   051    Pre-fail 
Always       -       0
   8 Seek_Time_Performance   0x0024   253   253   000    Old_age 
Offline      -       0
   9 Power_On_Hours          0x0032   100   100   000    Old_age 
Always       -       571859
  12 Power_Cycle_Count       0x0032   100   100   000    Old_age 
Always       -       1
194 Temperature_Celsius     0x0022   157   148   000    Old_age 
Always       -       27
197 Current_Pending_Sector  0x0033   253   253   009    Pre-fail 
Always       -       0
198 Offline_Uncorrectable   0x0031   253   253   009    Pre-fail 
Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   253   253   000    Old_age 
Always       -       0
200 Multi_Zone_Error_Rate   0x000b   100   100   051    Pre-fail 
Always       -       0
201 Soft_Read_Error_Rate    0x000b   253   253   051    Pre-fail 
Always       -       0

SMART Error Log Version: 1
Warning: ATA error count 123 inconsistent with error log pointer 1

ATA Error Count: 123 (device log contains only the most recent five 
errors)
         CR = Command Register [HEX]
         FR = Features Register [HEX]
         SC = Sector Count Register [HEX]
         SN = Sector Number Register [HEX]
         CL = Cylinder Low Register [HEX]
         CH = Cylinder High Register [HEX]
         DH = Device/Head Register [HEX]
         DC = Device Command Register [HEX]
         ER = Error register [HEX]
         ST = Status register [HEX]
Timestamp = decimal seconds since the previous disk power-on.
Note: timestamp "wraps" after 2^32 msec = 49.710 days.

Error 123 occurred at disk power-on lifetime: 4765 hours
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   04 88 00 00 4f c2 e0

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
   -- -- -- -- -- -- -- --   ---------  --------------------
   b0 da 00 00 4f c2 e0 00 4272224.296  SMART RETURN STATUS
   ca 00 80 b7 e4 10 e4 00 4272224.296  WRITE DMA
   ec 00 00 bd 81 a4 e0 00 4272224.296  IDENTIFY DEVICE
   c8 00 30 8e 81 a4 e1 00 4272224.296  READ DMA
   c8 00 88 be 81 a4 e1 00 4272224.296  READ DMA

Error 122 occurred at disk power-on lifetime: 4763 hours
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   04 88 00 00 4f c2 e0

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
   -- -- -- -- -- -- -- --   ---------  --------------------
   b0 da 00 00 4f c2 e0 00 4263500.296  SMART RETURN STATUS
   c8 00 20 df 32 0f e4 00 4263500.296  READ DMA
   c8 00 18 bf 32 0f e4 00 4263500.296  READ DMA
   c8 00 08 16 72 5a e1 00 4263500.296  READ DMA
   ec 00 00 bd 81 a4 e0 00 4263500.296  IDENTIFY DEVICE

Error 121 occurred at disk power-on lifetime: 4640 hours
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   40 88 08 8f e1 0d e4   8 sectors at LBA = 0x040de18f = 68018575

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
   -- -- -- -- -- -- -- --   ---------  --------------------
   c8 00 08 8f e1 0d e4 00 4266667.296  READ DMA
   c8 00 40 7f e1 0d e4 00 4266625.296  READ DMA
   c8 00 28 7e 33 49 e1 00 4266625.296  READ DMA
   c8 00 10 66 33 49 e1 00 4266625.296  READ DMA
   c8 00 08 56 33 49 e1 00 4266625.296  READ DMA

Error 120 occurred at disk power-on lifetime: 4640 hours
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   40 88 10 87 e1 0d e4   16 sectors at LBA = 0x040de187 = 68018567

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
   -- -- -- -- -- -- -- --   ---------  --------------------
   c8 00 10 87 e1 0d e4 00 4266666.296  READ DMA
   c8 00 30 8f e1 0d e4 00   30332.000  READ DMA
   a1 00 05 01 00 00 a0 00       5.000  IDENTIFY PACKET DEVICE
   ec 00 05 01 00 00 b0 00       5.000  IDENTIFY DEVICE
   a1 00 05 01 00 00 b0 00       5.000  IDENTIFY PACKET DEVICE

Error 119 occurred at disk power-on lifetime: 4640 hours
   When the command that caused the error occurred, the device was 
active or idle.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   40 88 18 7f e1 0d e4

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Timestamp  Command/Feature_Name
   -- -- -- -- -- -- -- --   ---------  --------------------
   b0 d5 01 01 4f c2 e0 00 4272559.296  SMART READ LOG
   b0 d1 01 01 4f c2 e0 00 4272559.296  SMART READ ATTRIBUTE 
THRESHOLDS [OBS-4]
   b0 d0 01 00 4f c2 e0 00 4272559.296  SMART READ DATA
   b0 da 00 00 4f c2 00 00 4272559.296  SMART RETURN STATUS
   b0 da 00 00 4f c2 e0 00 4272559.296  SMART RETURN STATUS

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining 
LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      4765 
         -
Странно, тест ОК. Но, в отчете какие-то ошибки...

-- 
Rgrds,
Andriy
*********************************************************************
email: dobr at iop dot kiev dot ua            Kyiv, Ukraine
Phone: (380-44)   265-7824            Department of Gas Electronics
Fax:   (380-44)   265-2329             Institute of Physics of NASU
*********************************************************************


Подробная информация о списке рассылки Hardware