[Hardware] i810 и разрешения больше 1024x768
Genix
genix на list.ru
Чт Мар 17 16:10:58 MSK 2005
Приветствую!
Подскажите пожалуйста, удалось кому-нибудь заставить модуль i810 (видео
набортное, чип 845GL) работать в разрешении 1152x864?
Несмотря на то, что в /etc/X11/xorg.conf прописано:
# 1152x864, 85.0Hz; hfreq=0.000000, vfreq=0.000000
ModeLine "1152x864" 121.50 1152 1216 1344 1568 864 865 868 911
+hsync +vsync
и
Subsection "Display"
Depth 24
Modes "1280х1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
в логах наблюдаю следующую картину:
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400 at 70Hz
(II) I810(0): 640x480 at 60Hz
(II) I810(0): 640x480 at 67Hz
(II) I810(0): 640x480 at 72Hz
(II) I810(0): 640x480 at 75Hz
(II) I810(0): 800x600 at 56Hz
(II) I810(0): 800x600 at 60Hz
(II) I810(0): 800x600 at 72Hz
(II) I810(0): 800x600 at 75Hz
(II) I810(0): 832x624 at 75Hz
(II) I810(0): 1024x768 at 87Hz (interlaced)
(II) I810(0): 1024x768 at 60Hz
(II) I810(0): 1024x768 at 70Hz
(II) I810(0): 1024x768 at 75Hz
(II) I810(0): 1280x1024 at 75Hz
(II) I810(0): 1152x870 at 75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 640 vsize 480 refresh: 120 vid: 31793
(II) I810(0): #1: hsize: 800 vsize 600 refresh: 120 vid: 31813
(II) I810(0): #2: hsize: 1024 vsize 768 refresh: 100 vid: 26721
(II) I810(0): #3: hsize: 1152 vsize 864 refresh: 85 vid: 22897
^^^^^^^^^^^^^^^^^^^^ вот он!! ^^^^^^^^^^^^^^^^^^^^^
(II) I810(0): #4: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) I810(0): #5: hsize: 1600 vsize 1200 refresh: 65 vid: 17833
а потом:
(II) I810(0): Not using mode "1152x864" (no mode of this name)
конфиг прилагается
xorg-x11-drv-i8xx-6.8.2-alt3
xorg-x11-server-6.8.2-alt3
--
У каждого в башке свои тараканы...
-------------- next part --------------
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "250 30"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbVariant" ",winkeys"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp:switch,grp_led:scroll"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
# This loads the Video for Linux module.
Load "v4l"
# This loads the NVIDIA GLX extension module.
# IT IS IMPORTANT TO KEEP NAME AS FULL PATH TO libglx.so ELSE
# IT WILL LOAD XFree86 glx module and the server will crash.
Load "glx"
Load "dri"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "CTX|CTX PR705F series"
VendorName "CTX"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-86
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
# Added by genix (1024x768 at 100 Hz)
ModeLine "1024x768" 113.303 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
# Added by genix (1280x1024 at 85 Hz)
ModeLine "1280x1024" 159.36 1280 1376 1512 1744 1024 1025 1028 1075 -HSync +Vsync
# 1152x864, 85.0Hz; hfreq=0.000000, vfreq=0.000000
ModeLine "1152x864" 121.50 1152 1216 1344 1568 864 865 868 911 +hsync +vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "Intel i845"
VendorName "Unknown"
BoardName "Unknown"
Driver "i810"
VideoRam 32768
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "DPMS" "on"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "Intel i845"
Monitor "CTX|CTX PR705F series"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280х1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Подробная информация о списке рассылки Hardware