[Hardware] maxselect servers + opteron
Anton Farygin
rider на altlinux.com
Вт Янв 18 11:04:00 MSK 2005
V.Sokolov wrote:
> Anton Farygin wrote:
>
>>
>> По поводу использования - все железо работает (в том числе сенсоры).
>> IPMI мы не проверяли (под Linux мало где пока поддерживается IPMI).
>>
>> Ядра 2.4, 2.6
>>
> Т.е. сенсоры работают с ядром 2.6?
> Но 8525 -- на IWill DK8S2, разве там не adm1026?
>
Именно.
# lsmod|grep adm
adm1026 39444 0
i2c_sensor 4608 1 adm1026
i2c_core 22784 4 i2c_amd8111,adm1026,i2c_sensor,i2c_amd756
# sensors
adm1026-i2c-0-2c
Adapter: SMBus AMD8111 adapter at 80e0
in0: +1.15 V (min = +0.00 V, max = +2.99 V)
in1: +1.58 V (min = +0.00 V, max = +2.99 V)
in2: +1.57 V (min = +0.00 V, max = +2.99 V)
in3: +1.20 V (min = +0.00 V, max = +2.99 V)
in4: +1.20 V (min = +0.00 V, max = +2.99 V)
in5: +1.12 V (min = +0.00 V, max = +2.99 V)
in6: +1.25 V (min = +0.00 V, max = +2.49 V)
in7: +1.57 V (min = +0.00 V, max = +2.49 V)
in8: +0.00 V (min = +0.00 V, max = +2.49 V)
in9: +0.58 V (min = +1.25 V, max = +0.98 V)
in10: +3.12 V (min = +0.00 V, max = +3.98 V)
in11: +3.33 V (min = +0.00 V, max = +4.42 V)
in12: +3.35 V (min = +0.00 V, max = +4.42 V)
in13: +5.05 V (min = +0.00 V, max = +6.63 V)
in14: +1.53 V (min = +0.00 V, max = +2.99 V)
in15: +11.81 V (min = +0.00 V, max = +15.94 V)
in16: -11.95 V (min = -16.00 V, max = +2.43 V)
ERROR: Can't get FAN0 data!
fan1: 0 RPM (min = 0 RPM, div = 2)
fan2: 0 RPM (min = 0 RPM, div = 2)
fan3: 3648 RPM (min = 0 RPM, div = 2)
fan4: 0 RPM (min = 0 RPM, div = 2)
fan5: 0 RPM (min = 0 RPM, div = 2)
fan6: 3479 RPM (min = 0 RPM, div = 2)
fan7: -1 RPM (min = 0 RPM, div = 2)
temp1: +41 C (low = -128 C, high = +80 C)
temp2: +60 C (low = -128 C, high = +100 C)
temp3: +59 C (low = -128 C, high = +100 C)
Rgds,
Rider
Подробная информация о списке рассылки Hardware