[Hardware] GeForce FX5500 ?
Gleb Kulikov
glebus на asd.iao.ru
Пн Апр 18 09:16:49 MSD 2005
В сообщении от Понедельник 18 Апрель 2005 01:26 Gleb Kulikov написал:
> В сообщении от Суббота 16 Апрель 2005 12:57 Yakov Reztsov написал:
> > > GeForce 5500. При указании в XFree86-4драйвера nvidia -- кернель паник,
> > > или перезагрузка. Это так и должно быть?
> >
> > Работает ли с драйвером nv ?
>
> Нет. Трапа нет, но нет и изображения -- чёрный экран. По c-a-b, икс сервер
> нормально завершается.
Да, на борту -- DVI.
Почему нет изображения -- понятно (ниже кусочек лога), непонятно, что с этим
делать и почему трапаются и уносят в небытие всю систему, "родные"
нвидиавские драйвера. Поможите, люди добры-яяя :)
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "ViewSonic E641"
(**) | |-->Device "NVIDIA GeForce4 (generic)"
(**) |-->Input Device "Mouse1"
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0651 card 1039,0651 rev 02 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0003 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0008 card 0000,0000 rev 25 class 06,01,00 hdr 80
(II) PCI: 00:02:5: chip 1039,5513 card 1458,5002 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1458,a002 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1458,5004 rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1458,5004 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:3: chip 1039,7002 card 1458,5004 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:04:0: chip 1039,0900 card 1458,e000 rev 90 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0326 card 0000,0000 rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xec000000 - 0xedffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x0326) rev 161, Mem @
0xe
c000000/24, 0xe0000000/27
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset 0x0326 found
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "0x0326"
(**) NV(0): Depth 16, (--) framebuffer bpp 16
(==) NV(0): RGB weight 565
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xE0000000
(--) NV(0): MMIO registers at 0xEC000000
(--) NV(0): On a laptop. Assuming Digital Flat Panel
(II) NV(0): Detected CRTC controller 1 being used
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400 на 70Hz
(II) NV(0): 720x400 на 88Hz
(II) NV(0): 640x480 на 60Hz
(II) NV(0): 640x480 на 67Hz
(II) NV(0): 640x480 на 72Hz
(II) NV(0): 640x480 на 75Hz
(II) NV(0): 800x600 на 56Hz
(II) NV(0): 800x600 на 60Hz
(II) NV(0): 800x600 на 72Hz
(II) NV(0): 800x600 на 75Hz
(II) NV(0): 832x624 на 75Hz
(II) NV(0): 1024x768 на 87Hz (interlaced)
(II) NV(0): 1024x768 на 60Hz
(II) NV(0): 1024x768 на 70Hz
(II) NV(0): 1024x768 на 75Hz
(II) NV(0): 1152x870 на 75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
(II) NV(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) NV(0): #2: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) NV(0): #3: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) NV(0): #4: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) NV(0): #5: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) NV(0): #6: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): #7: hsize: 832 vsize 624 refresh: 75 vid: 20297
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 94.5 MHz Image Size: 310 x 230 mm
(II) NV(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376
h_bor
der: 0
(II) NV(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808
v_border:
0
(II) NV(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz,
PixClock
max 110 MHz
(II) NV(0): Monitor name: StudioWorks 7
(II) NV(0): Monitor name: 00B
(II) NV(0): end of DDC Monitor info
(II) NV(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublesc
an)
(II) NV(0): Not using default mode "512x384" (bad mode
clock/interlace/doublesca
n)
(II) NV(0): Not using default mode "512x384" (bad mode
clock/interlace/doublesca
n)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode
clock/interlace/doublesca
n)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode
clock/interlace/doublesca
n)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode
clock/interlace/doublesca
n)
(И так далее, для абсолютно всех видеорежимов)
(--) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806
-h
sync -vsync
(и так далее)
(--) NV(0): Display dimensions: (330, 250) mm
(--) NV(0): DPI set to (78, 78)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms" "on"
(**) NV(0): DPMS enabled
(WW) NV(0): Option "AGPMode" is not used
(==) RandR enabled
Ну и наконец, последние строчки в протоколе:
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Mouse1: ps2EnableDataReporting: succeeded
Экран без признаков жизни (монитор подключен аналоговый, за неимением...)
--
Салют, /GLeb
UIN: 15341920
jabber://gleb@asd.iao.ru
netmail: 2:5005/78
Подробная информация о списке рассылки Hardware