[Hardware] Винчестер WD2000JD

[Aleksey Korotkov]

On Fri, 01 Apr 2005 21:20:40 +0300
Gennadiy Redko <uit1 at zaz.zp.ua> wrote:

GR> Еще вспомнил, - уж извините :)  :
GR> На дисках WD, кажется, этот режим включается перемычкой на
GR> винте.

Что-то я там ничего не включал...

[root at localhost proc]# smartctl -a /dev/hda
smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD2000JB-55GVA0
Serial Number:    WD-WCAL81409294
Firmware Version: 08.02D08
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not
indicated Local Time is:    Sat Apr  2 01:24:56 2005 SAMST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection
activity was                                        suspended by
an interrupting command from host.                               
        Auto Offline Data Collection: Enabled. Self-test
execution status:      (   0) The previous self-test routine
completed                                        without error or
no self-test has ever                                        been
run. Total time to complete Offline
data collection:                 (5778) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline
immediate.                                        Auto Offline
data collection on/off support.                                  
     Suspend Offline collection upon new                         
              command.                                       
Offline surface scan supported.                                  
     Self-test supported.                                       
Conveyance Self-test supported.                                  
     Selective Self-test supported. SMART capabilities:          
 (0x0003) Saves SMART data before entering                       
                power-saving mode.                               
        Supports SMART auto save timer. Error logging capability:
       (0x01) Error logging supported.                           
            No General Purpose Logging support. Short self-test
routine recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  75) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE     
ID# UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   200   051    Pre-fail 
Always       -       0  3 Spin_Up_Time            0x0007   129  
129   021    Pre-fail  Always       -       6050  4
Start_Stop_Count        0x0032   100   100   040    Old_age  
Always       -       39  5 Reallocated_Sector_Ct   0x0033   200  
200   140    Pre-fail  Always       -       0  7 Seek_Error_Rate 
       0x000b   200   200   051    Pre-fail  Always       -      
0  9 Power_On_Hours          0x0032   100   100   000    Old_age 
 Always       -       719 10 Spin_Retry_Count        0x0013   100
  253   051    Pre-fail  Always       -       0 11
Calibration_Retry_Count 0x0013   100   253   051    Pre-fail 
Always       -       0 12 Power_Cycle_Count       0x0032   100  
100   000    Old_age   Always       -       39 194
Temperature_Celsius     0x0022   113   105   000    Old_age  
Always       -       37 196 Reallocated_Event_Count 0x0032   200 
 200   000    Old_age   Always       -       0 197
Current_Pending_Sector  0x0012   200   200   000    Old_age  
Always       -       0 198 Offline_Uncorrectable   0x0012   200  
200   000    Old_age   Always       -       0 199
UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age  
Always       -       0 200 Multi_Zone_Error_Rate   0x0009   200  
200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use:
smartctl -t]

-- 
С уважением,
Алексей Коротков

mailto:ziga at uni.udm.ru