[Hardware] HDD
Дворников Михаил
m_dvor на soc.adm.yar.ru
Пт Апр 1 09:05:59 MSD 2005
Извините за длинное письмо.
Подскажите, что с винчестером и можно ли его сдать по гарантии.
Симптомы - иногда сильно тормозит.
# smartctl -a /dev/hda
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 051 045 006 Pre-fail
Always - 136592990
3 Spin_Up_Time 0x0003 096 096 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 8
5 Reallocated_Sector_Ct 0x0033 098 098 036 Pre-fail
Always - 112
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail
Always - 15605357
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 425
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 424
194 Temperature_Celsius 0x0022 035 041 000 Old_age Always
- 35
195 Hardware_ECC_Recovered 0x001a 051 045 000 Old_age Always
- 136592990
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 27 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Timestamp = decimal seconds since the previous disk power-on.
Note: timestamp "wraps" after 2^32 msec = 49.710 days.
Error 27 occurred at disk power-on lifetime: 384 hours
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 f1 00 4f c2 a0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
b0 d9 f1 00 4f c2 a0 00 13.207 SMART DISABLE OPERATIONS
b0 d2 f1 00 4f c2 a0 00 13.198 SMART ENABLE/DISABLE ATTRIBUTE
AUTOSAVE
b0 d8 ff 00 4f c2 a0 00 12.981 SMART ENABLE OPERATIONS
91 00 ff 00 00 00 af 00 12.627 INITIALIZE DEVICE PARAMETERS [OBS-6]
c6 00 10 00 00 00 a0 00 0.000 SET MULTIPLE MODE
Error 25 occurred at disk power-on lifetime: 375 hours
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 ff 00 4f c2 a0 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
b0 d8 ff 00 4f c2 a0 00 242.512 SMART ENABLE OPERATIONS
91 00 ff 00 00 00 af 00 239.295 INITIALIZE DEVICE PARAMETERS [OBS-6]
c6 00 10 00 00 00 a0 00 239.226 SET MULTIPLE MODE
91 00 ff 00 00 00 af 00 268.007 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 00 00 00 00 a0 00 268.007 RECALIBRATE [OBS-4]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 90% 398
-
# 2 Extended offline Aborted by host 90% 398
-
Подробная информация о списке рассылки Hardware