[Hardware] hp psc 1315 - please help!

Сб Ноя 27 15:50:01 MSK 2004

День добрый!
Помогите пожалуйста настроить HP PSC 1315 принтер+сканер.

Симптомы:

включаю компьютер, загружается Compact 2.3

Включаю принтер. В логе:

Nov 21 15:43:15 localhost kernel: hub.c: new USB device 00:10.0-2, assigned address 2
Nov 21 15:43:15 localhost kernel: printer.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3F11
Nov 21 15:43:19 localhost /etc/hotplug/usb.agent: Setup printer for USB product 3f0/3f11/100
Nov 21 15:43:19 localhost /etc/hotplug/usb.agent: ... no modules for USB product 3f0/3f11/100
Nov 21 15:43:19 localhost /etc/hotplug/usb.agent: ... no modules for USB product 3f0/3f11/100

Устанавливаю пакеты:
apt-get install hpoj hpijs hpijs-foomatic
Preparing...                 ########################################### [100%]
1: hpijs                     ########################################### [ 25%]
2: libucd-snmp               ########################################### [ 50%]
3: libhpoj                   ########################################### [ 75%]
4: hpoj                      ########################################### [100%]
5. hpijs-foomatic               #######################################################################
Done.

Запускаю DrakConf.    Добавить принтер - Локальный принтер - выбираю dev/usb/lp0 - выбираю HP - "PSC 1210 Ghostscript+hpijs"  (поскольку 1315 в списке нет). - ОК - ОК - печать тестовой страницы - ОК. Печатается тестовая страница. Из любого приложения теперь можно печатать. Теперь самое интересное:

ptal-init setup

Probe for USB-connected devices ([y]/n)?  

Probing "/dev/usb/lp0"...  
    Found "psc 1310 series "
    with serial number "HU47GBQ039T5".

Setting up as "mlc:usb:psc_1310_series_".
    Enabling ptal-mlcd and ptal-printd.
...
Starting the HP OfficeJet Linux driver.
    mlc:usb:psc_1310_series_

И всё, после этого напечатать ничего нельзя ниоткуда и xsane не находит сканер.

В логе:
Nov 21 16:43:19 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3794, e=2         ptal-mlcd success
fully initialized. 
Nov 21 16:43:19 localhost ptal-mlcd: SYSLOG at /usr/src/RPM/BUILD/hpoj-0.90/mlcd/bp/ex/ExMgr.h:564, dev=<mlc:usb:probe@/de
v/usb/lp0>, pid=3794, e=11         ptal-mlcd successfully activated, mode=1284.4. 
Nov 21 16:43:57 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3806, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:57 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp1>, pid=3806, e=19         Cou
ldn't find device: llioOpenOne failed! 
Nov 21 16:43:57 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3815, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:57 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp10>, pid=3815, e=19         Co
uldn't find device: llioOpenOne failed! 
Nov 21 16:43:57 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3824, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:57 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp11>, pid=3824, e=19         Co
uldn't find device: llioOpenOne failed! 
Nov 21 16:43:57 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3833, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:57 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp12>, pid=3833, e=19         Co
uldn't find device: llioOpenOne failed! 
Nov 21 16:43:57 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3842, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:57 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp13>, pid=3842, e=19         Co
uldn't find device: llioOpenOne failed! 
Nov 21 16:43:57 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3851, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:57 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp14>, pid=3851, e=19         Co
uldn't find device: llioOpenOne failed! 
Nov 21 16:43:57 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3860, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:57 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp15>, pid=3860, e=19         Co
uldn't find device: llioOpenOne failed! 
Nov 21 16:43:57 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3869, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:57 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp2>, pid=3869, e=19         Cou
ldn't find device: llioOpenOne failed! 
Nov 21 16:43:57 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3878, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:57 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp3>, pid=3878, e=19         Cou
ldn't find device: llioOpenOne failed! 
Nov 21 16:43:57 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3887, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:57 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp4>, pid=3887, e=19         Cou
ldn't find device: llioOpenOne failed! 
Nov 21 16:43:57 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3896, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:57 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp5>, pid=3896, e=19         Cou
ldn't find device: llioOpenOne failed! 
Nov 21 16:43:58 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3905, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:58 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp6>, pid=3905, e=19         Cou
ldn't find device: llioOpenOne failed! 
Nov 21 16:43:58 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3914, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:58 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp7>, pid=3914, e=19         Cou
ldn't find device: llioOpenOne failed! 
Nov 21 16:43:58 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3923, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:58 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp8>, pid=3923, e=19         Cou
ldn't find device: llioOpenOne failed! 
Nov 21 16:43:58 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:probe>, pid=3932, e=111         ptal-mlcd succe
ssfully initialized. 
Nov 21 16:43:58 localhost ptal-mlcd: ERROR at ExMgr.cpp:2469, dev=<mlc:usb:probe@/dev/usb/lp9>, pid=3932, e=19         Cou
ldn't find device: llioOpenOne failed! 
Nov 21 16:44:14 localhost ptal-mlcd: SYSLOG at ExMgr.cpp:701, dev=<mlc:usb:psc_1310_series_>, pid=3942, e=2         ptal-m
lcd successfully initialized. 
Nov 21 16:44:14 localhost ptal-printd: ptal-printd(mlc:usb:psc_1310_series_) successfully initialized using /var/run/ptal-
printd/mlc_usb_psc_1310_series_*. 

Вот так. Что делать, куда рыть ? Нужны ещё какие-нибудь логи ?
Заранее большое спасибо.  
С уважением,
Григорий Тубольцев