[Hardware] Ядро 2.6 и второй хард

[Igor Tertishny]

> Монтирует, хоть ты тресни (std26-up-alt).  Все подряд.  А что там
> и что пишет в /var/log/messages?

Я уже поменял материнку. Та же самая история. Значит, дело в системе. 
В /var/log/messages по поводу hdb:

May 29 12:52:21 yby kernel: ide: Assuming 33MHz system bus speed for PIO 
modes; override with idebus=xx
May 29 12:52:21 yby kernel: VP_IDE: IDE controller at PCI slot 0000:00:0f.1
May 29 12:52:21 yby kernel: VP_IDE: chipset revision 6
May 29 12:52:21 yby kernel: VP_IDE: not 100%% native mode: will probe irqs 
later
May 29 12:52:21 yby kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller 
on pci0000:00:0f.1
May 29 12:52:21 yby kernel:     ide0: BM-DMA at 0xa800-0xa807, BIOS settings: 
hda:DMA, hdb:DMA
May 29 12:52:21 yby kernel:     ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: 
hdc:DMA, hdd:DMA
May 29 12:52:21 yby kernel: hda: WDC WD1200JB-00EVA0, ATA DISK drive
May 29 12:52:21 yby kernel: hdb: Maxtor 6Y080L0, ATA DISK drive
May 29 12:52:21 yby kernel: Using anticipatory io scheduler
May 29 12:52:21 yby kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 29 12:52:21 yby kernel: hdc: HL-DT-ST GCE-8520B, ATAPI CD/DVD-ROM drive
May 29 12:52:21 yby kernel: hdd: SONY DVD-ROM DDU1612, ATAPI CD/DVD-ROM drive
May 29 12:52:21 yby kernel: ide1 at 0x170-0x177,0x376 on irq 15
May 29 12:52:21 yby kernel: VIA8237SATA: IDE controller at PCI slot 
0000:00:0f.0
May 29 12:52:21 yby kernel: VIA8237SATA: chipset revision 128
May 29 12:52:21 yby kernel: VIA8237SATA: 100%% native mode on irq 20
May 29 12:52:21 yby kernel:     ide2: BM-DMA at 0xb400-0xb407, BIOS settings: 
hde:pio, hdf:pio
May 29 12:52:21 yby kernel:     ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: 
hdg:pio, hdh:pio
May 29 12:52:21 yby kernel: hda: max request size: 1024KiB
May 29 12:52:21 yby kernel: hda: Host Protected Area detected.
May 29 12:52:21 yby kernel: ^Icurrent capacity is 234439535 sectors (120033 
MB)
May 29 12:52:21 yby kernel: ^Inative  capacity is 234441648 sectors (120034 
MB)
May 29 12:52:21 yby kernel: hda: Host Protected Area disabled.
May 29 12:52:21 yby kernel: hda: 234441648 sectors (120034 MB) w/8192KiB 
Cache, CHS=16383/255/63, UDMA(100)
May 29 12:52:21 yby kernel:  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 
hda11 >
May 29 12:52:21 yby kernel: hdb: max request size: 128KiB
May 29 12:52:21 yby kernel: hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, 
CHS=65535/16/63, UDMA(133)
May 29 12:52:21 yby kernel:  hdb: hdb1 hdb2 hdb3

> Подробнее -- dmesg | grep hd, что за винт, через что вешается.
>
[root на yby /]# dmesg | grep hd
    ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD1200JB-00EVA0, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
hdc: HL-DT-ST GCE-8520B, ATAPI CD/DVD-ROM drive
hdd: SONY DVD-ROM DDU1612, ATAPI CD/DVD-ROM drive
    ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:pio, hdh:pio
hda: max request size: 1024KiB
hda: Host Protected Area detected.
hda: Host Protected Area disabled.
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, 
UDMA(100)
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
hdb: max request size: 128KiB
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
 hdb: hdb1 hdb2 hdb3
Reiserfs journal params: device hda7, size 8192, journal first block 18, max 
trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda7) for (hda7)
Adding 1028120k swap on /dev/hda11.  Priority:-1 extents:1
EXT3 FS on hda8, internal journal
EXT3 FS on hda9, internal journal
EXT3 FS on hda10, internal journal

[root на yby /]# mount /mnt/Unix/Video1
mount: /dev/hdb3 already mounted or /mnt/Unix/Video1 busy

[root на yby /]# cat /etc/fstab
/dev/hda7 / reiserfs notail 1 1
devpts /dev/pts devpts gid=5,mode=0620 0 0
/dev/hda1 /mnt/C vfat iocharset=koi8-r,quiet,codepage=866,umask=0 0 0
/dev/hda6 /mnt/E vfat iocharset=koi8-r,quiet,codepage=866,umask=0 0 0
/dev/hda8 /mnt/Unix/Alt1 ext3 defaults 1 2
/dev/hda9 /mnt/Unix/Alt2 ext3 defaults 1 2
/dev/hda10 /mnt/Unix/Alt3 ext3 defaults 1 2
/dev/hdb1 /mnt/Unix/FreeBSD ext3 defaults 1 2
/dev/hdb2 /home/ilar/Video reiserfs notail 1 2
/dev/hdb3 /mnt/Unix/Video1 reiserfs notail 1 2
/dev/cdrom /mnt/cdrom auto user,iocharset=koi8-r,noauto,ro,exec 0 0
/dev/cdrom2 /mnt/cdrom2 auto user,iocharset=koi8-r,noauto,ro,exec 0 0
/dev/floppy /mnt/floppy auto 
user,iocharset=koi8-r,quiet,sync,codepage=866,noauto,umask=0,exec 0 0
proc /proc proc gid=19 0 0
/dev/hda11 swap swap defaults 0 0
192.168.0.1:/AltLinux /AltLinux nfs user,exec,dev,suid,rw,soft 1 1
192.168.0.1:/Install/Video2 /pub/Video nfs user,exec,dev,suid,rw,soft 1 1
192.168.0.1:/pub/pubold /pub/pubold nfs user,exec,dev,suid,rw,soft 1 1
192.168.0.8:/pub1 /mnt/pub1 nfs user,exec,dev,suid,rw,noauto 1 1
192.168.0.8:/var/www/html /var/www/html/not nfs user,exec,dev,suid,rw,noauto 1 
1
192.168.0.1:/var/www/html /var/www/html/srv nfs user,exec,dev,suid,rw,soft 1 1
192.168.0.5:/wrm /wrm nfs user,exec,dev,suid,rw,soft,noauto 1 1
192.168.0.4:/pub1 /home/ilar/mnt/pub1 nfs user,exec,dev,suid,rw,soft,noauto 1 
1
jacktmp /var/lib/jack/tmp       ramfs   defaults        0 0
/dev/cdrom1             /mnt/cdrom1             udf,iso9660 
noauto,user,kudzu,noexec,nodev,nosuid,ro 0 0
/dev/sda1             /mnt/usb       auto      
noauto,user,noexec,nodev,nosuid,rw 0 0
none  /sys  sysfs defaults 0 0

И что дальше делать? Я уже просто отчаялся. У всех работает - у меня никак. 
Подскажите кто-нибудь!