[devel] [PATCH 13/35] drm: new bridge driver - stdp4028
asheplyakov на yandex.ru
asheplyakov на yandex.ru
Пт Май 20 19:28:27 MSK 2022
From: "Vadim V. Vlasov" <vvv19xx на gmail.com>
MegaChips stdp4028 is LVDS to DP bridge.
The driver can work in interrupt or poll mode.
Videomodes may be specified in the devicetree or read from EDID.
Signed-off-by: Vadim V. Vlasov <vvv19xx на gmail.com>
Signed-off-by: Alexey Sheplyakov <asheplyakov на basealt.ru>
X-feature-Baikal-M
---
drivers/gpu/drm/bridge/Kconfig | 8 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/stdp4028.c | 486 ++++++++++++++++++++++++++++++
3 files changed, 495 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/stdp4028.c
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 44ad70939663..3795e7020aec 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -316,6 +316,14 @@ config DRM_TI_TPD12S015
Texas Instruments TPD12S015 HDMI level shifter and ESD protection
driver.
+config DRM_STDP4028
+ tristate "MegaChips STDP4028 DP bridge"
+ depends on OF
+ select DRM_KMS_HELPER
+ select DRM_PANEL
+ help
+ MegaChips STDP4028 DP bridge driver
+
source "drivers/gpu/drm/bridge/analogix/Kconfig"
source "drivers/gpu/drm/bridge/adv7511/Kconfig"
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index f2c73683cfcb..9faf98509d2c 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
obj-$(CONFIG_DRM_TI_TPD12S015) += ti-tpd12s015.o
obj-$(CONFIG_DRM_NWL_MIPI_DSI) += nwl-dsi.o
obj-$(CONFIG_DRM_ITE_IT66121) += ite-it66121.o
+obj-$(CONFIG_DRM_STDP4028) += stdp4028.o
obj-y += analogix/
obj-y += cadence/
diff --git a/drivers/gpu/drm/bridge/stdp4028.c b/drivers/gpu/drm/bridge/stdp4028.c
new file mode 100644
index 000000000000..12b3ff31b213
--- /dev/null
+++ b/drivers/gpu/drm/bridge/stdp4028.c
@@ -0,0 +1,486 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for MegaChips STDP4028 LVDS to DP display bridge
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+/* video modes */
+#include <video/display_timing.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+
+#define MAX_PIXEL_CLOCK 330000
+
+#define EDID_EXT_BLOCK_CNT 0x7E
+
+#define STDP4028_PRODUCT_ID_REG 0x00
+#define STDP4028_IRQ_OUT_CONF_REG 0x02
+#define STDP4028_IRQ_STS_REG 0x03
+#define STDP4028_I2C_CTRL_REG 0x08
+#define STDP4028_LVDS_FMT_REG 0x0B
+#define STDP4028_LVDS_CTRL0_REG 0x0C
+#define STDP4028_DPTX_IRQ_EN_REG 0x3C
+#define STDP4028_DPTX_IRQ_STS_REG 0x3D
+#define STDP4028_DPTX_STS_REG 0x3E
+
+#define STDP4028_DPTX_DP_IRQ_EN 0x10
+
+#define STDP4028_DPTX_HOTPLUG_IRQ_EN 0x04
+#define STDP4028_DPTX_LINK_CH_IRQ_EN 0x20
+#define STDP4028_DPTX_IRQ_CONFIG \
+ (STDP4028_DPTX_LINK_CH_IRQ_EN | STDP4028_DPTX_HOTPLUG_IRQ_EN)
+
+#define STDP4028_DPTX_HOTPLUG_STS 0x02
+#define STDP4028_DPTX_LINK_STS 0x10
+#define STDP4028_CON_STATE_CONNECTED \
+ (STDP4028_DPTX_HOTPLUG_STS | STDP4028_DPTX_LINK_STS)
+
+#define STDP4028_DPTX_HOTPLUG_CH_STS 0x04
+#define STDP4028_DPTX_LINK_CH_STS 0x20
+#define STDP4028_DPTX_IRQ_CLEAR \
+ (STDP4028_DPTX_LINK_CH_STS | STDP4028_DPTX_HOTPLUG_CH_STS)
+
+struct stdp4028 {
+ struct drm_connector connector;
+ struct drm_bridge bridge;
+ struct i2c_client *stdp4028_i2c;
+ struct i2c_client *edid_i2c;
+ struct edid *edid;
+ struct gpio_desc *reset_gpio;
+ struct mutex lock;
+ int channels;
+ int chan_cfg;
+};
+
+static inline int stdp_read(struct stdp4028 *stdp, int reg)
+{
+ int ret;
+
+ ret = i2c_smbus_read_word_data(stdp->stdp4028_i2c, reg);
+ if (ret < 0)
+ return ret;
+ return be16_to_cpu(ret);
+}
+
+static inline int stdp_write(struct stdp4028 *stdp, int reg, u16 val)
+{
+ val = cpu_to_be16(val);
+ return i2c_smbus_write_word_data(stdp->stdp4028_i2c, reg, val);
+}
+
+#define bridge_to_stdp4028(bridge) \
+ container_of(bridge, struct stdp4028, bridge)
+
+#define connector_to_stdp4028(connector) \
+ container_of(connector, struct stdp4028, connector)
+
+static u8 *stdp4028_get_edid(struct i2c_client *client)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ unsigned char start = 0x00;
+ unsigned int total_size;
+ u8 *block = kmalloc(EDID_LENGTH, GFP_KERNEL);
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = &start,
+ }, {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = EDID_LENGTH,
+ .buf = block,
+ }
+ };
+
+ if (!block)
+ return NULL;
+
+ if (i2c_transfer(adapter, msgs, 2) != 2) {
+ DRM_ERROR("Unable to read EDID.\n");
+ goto err;
+ }
+
+ if (!drm_edid_block_valid(block, 0, false, NULL)) {
+ DRM_ERROR("Invalid EDID data\n");
+ goto err;
+ }
+
+ total_size = (block[EDID_EXT_BLOCK_CNT] + 1) * EDID_LENGTH;
+ if (total_size > EDID_LENGTH) {
+ kfree(block);
+ block = kmalloc(total_size, GFP_KERNEL);
+ if (!block)
+ return NULL;
+
+ /* Yes, read the entire buffer, and do not skip the first
+ * EDID_LENGTH bytes.
+ */
+ start = 0x00;
+ msgs[1].len = total_size;
+ msgs[1].buf = block;
+
+ if (i2c_transfer(adapter, msgs, 2) != 2) {
+ DRM_ERROR("Unable to read EDID extension blocks.\n");
+ goto err;
+ }
+ }
+
+ return block;
+
+err:
+ kfree(block);
+ return NULL;
+}
+
+/*
+ * Get videomode specified in the devicetree.
+ * Return 1 on success, 0 otherwise.
+ */
+static int stdp4028_get_of_modes(struct drm_connector *connector)
+{
+ struct stdp4028 *stdp = connector_to_stdp4028(connector);
+ struct i2c_client *client = stdp->stdp4028_i2c;
+ struct drm_display_mode *mode;
+ struct device_node *np = client->dev.of_node;
+ struct display_timing timing;
+ struct videomode video_mode;
+ int ret;
+
+ ret = of_get_display_timing(np, "panel-timing", &timing);
+ if (ret < 0)
+ return 0;
+
+ videomode_from_timing(&timing, &video_mode);
+
+ mode = drm_mode_create(connector->dev);
+ if (!mode)
+ return 0;
+ drm_display_mode_from_videomode(&video_mode, mode);
+ mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_probed_add(connector, mode);
+ return 1;
+}
+
+static int stdp4028_get_modes(struct drm_connector *connector)
+{
+ struct stdp4028 *stdp;
+ struct i2c_client *client;
+ int num_modes = 0;
+
+ stdp = connector_to_stdp4028(connector);
+ client = stdp->edid_i2c;
+
+ mutex_lock(&stdp->lock);
+
+ num_modes = stdp4028_get_of_modes(connector);
+ if (num_modes > 0) {
+ mutex_unlock(&stdp->lock);
+ return num_modes;
+ }
+
+ kfree(stdp->edid);
+ stdp->edid = (struct edid *) stdp4028_get_edid(client);
+
+ if (stdp->edid) {
+ drm_connector_update_edid_property(connector, stdp->edid);
+ num_modes = drm_add_edid_modes(connector, stdp->edid);
+ }
+
+ mutex_unlock(&stdp->lock);
+
+ return num_modes;
+}
+
+
+static enum drm_mode_status stdp4028_mode_valid(
+ struct drm_connector *connector, struct drm_display_mode *mode)
+{
+ if (mode->clock > MAX_PIXEL_CLOCK) {
+ DRM_INFO("The pixel clock for the mode %s is too high, and not supported.",
+ mode->name);
+ return MODE_CLOCK_HIGH;
+ }
+
+ return MODE_OK;
+}
+
+static const struct
+drm_connector_helper_funcs stdp4028_connector_helper_funcs = {
+ .get_modes = stdp4028_get_modes,
+ .mode_valid = stdp4028_mode_valid,
+};
+
+static enum drm_connector_status stdp4028_detect(
+ struct drm_connector *connector, bool force)
+{
+ struct stdp4028 *stdp = connector_to_stdp4028(connector);
+ s32 link_state;
+
+ link_state = stdp_read(stdp, STDP4028_DPTX_STS_REG);
+
+ if (link_state == STDP4028_CON_STATE_CONNECTED)
+ return connector_status_connected;
+
+ if (link_state == 0)
+ return connector_status_disconnected;
+
+ return connector_status_unknown;
+}
+
+static const struct drm_connector_funcs stdp4028_connector_funcs = {
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = stdp4028_detect,
+ .destroy = drm_connector_cleanup,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static irqreturn_t stdp4028_irq_handler(int irq, void *dev_id)
+{
+ struct stdp4028 *stdp = dev_id;
+
+ mutex_lock(&stdp->lock);
+
+ stdp_write(stdp, STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR);
+
+ mutex_unlock(&stdp->lock);
+
+ if (stdp->connector.dev)
+ drm_kms_helper_hotplug_event(stdp->connector.dev);
+
+ return IRQ_HANDLED;
+}
+
+static int stdp4028_create_connector(struct drm_bridge *bridge)
+{
+ int ret;
+ struct stdp4028 *stdp
+ = bridge_to_stdp4028(bridge);
+ struct drm_connector *connector = &stdp->connector;
+
+ if (!bridge->encoder) {
+ DRM_ERROR("Parent encoder object not found");
+ return -ENODEV;
+ }
+
+ if (stdp->stdp4028_i2c->irq)
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ else
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+ DRM_CONNECTOR_POLL_DISCONNECT;
+
+ drm_connector_helper_add(connector, &stdp4028_connector_helper_funcs);
+
+ ret = drm_connector_init(bridge->dev, connector,
+ &stdp4028_connector_funcs,
+ DRM_MODE_CONNECTOR_DisplayPort);
+ if (ret) {
+ DRM_ERROR("Failed to initialize connector with drm\n");
+ return ret;
+ }
+
+ return drm_connector_attach_encoder(connector, bridge->encoder);
+}
+
+static int stdp4028_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct stdp4028 *stdp
+ = bridge_to_stdp4028(bridge);
+
+ /* Configures the bridge to re-enable interrupts after each ack. */
+ stdp_write(stdp, STDP4028_IRQ_OUT_CONF_REG, STDP4028_DPTX_DP_IRQ_EN);
+
+ /* Enable interrupts */
+ stdp_write(stdp, STDP4028_DPTX_IRQ_EN_REG, STDP4028_DPTX_IRQ_CONFIG);
+
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
+ return 0;
+
+ return stdp4028_create_connector(bridge);
+}
+
+static const struct drm_bridge_funcs stdp4028_funcs = {
+ .attach = stdp4028_attach,
+};
+
+static int stdp4028_probe(struct i2c_client *stdp4028_i2c,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &stdp4028_i2c->dev;
+ struct stdp4028 *bridge;
+ int ret;
+ u32 edid_i2c_reg, channels, chan_cfg;
+ enum of_gpio_flags flags;
+ int reset_gpio, i;
+ int reg;
+
+ bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL);
+ if (!bridge)
+ return -ENOMEM;
+
+ mutex_init(&bridge->lock);
+
+ bridge->stdp4028_i2c = stdp4028_i2c;
+ bridge->bridge.driver_private = bridge;
+ i2c_set_clientdata(stdp4028_i2c, bridge);
+
+ reset_gpio = of_get_named_gpio_flags(dev->of_node,
+ "reset-gpios", 0, &flags);
+ if (gpio_is_valid(reset_gpio)) {
+ unsigned long gpio_flags;
+
+ /*
+ * We will set GPIO to "inactive" state instead of toggling
+ * reset. If the chip is not ready we will return -EPROBE_DEFER
+ * and retry later.
+ */
+ if (!(flags & OF_GPIO_ACTIVE_LOW))
+ gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_LOW;
+ else
+ gpio_flags = GPIOF_OUT_INIT_HIGH;
+ ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
+ "stdp-reset");
+ if (ret) {
+ dev_err(dev, "request GPIO failed (%d)\n", ret);
+ /* continue anyway */
+ } else {
+ bridge->reset_gpio = gpio_to_desc(reset_gpio);
+ udelay(100);
+ }
+ } else if (reset_gpio == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ }
+
+ ret = of_property_read_u32(dev->of_node, "channels", &channels);
+ if (ret)
+ channels = 1;
+ bridge->channels = channels;
+
+ ret = of_property_read_u32(dev->of_node, "chan-cfg", &chan_cfg);
+ if (ret)
+ chan_cfg = 0;
+ bridge->chan_cfg = chan_cfg;
+
+ ret = of_property_read_u32(dev->of_node, "edid-reg", &edid_i2c_reg);
+ if (ret) {
+ dev_warn(dev, "edid-reg not specified, assuming 0x50...\n");
+ edid_i2c_reg = 0x50;
+ }
+
+ /* Configure stdp registers */
+ reg = stdp_read(bridge, STDP4028_PRODUCT_ID_REG);
+ if (reg < 0) {
+ dev_err(dev, "Can't read stdp id (%d)\n", reg);
+ return -EPROBE_DEFER; /* probably, reset not complete */
+ }
+
+ dev_info(dev, "stdp id word: %x\n", reg);
+
+ for (i = 0; i < 10; i++) {
+ reg = stdp_read(bridge, STDP4028_IRQ_STS_REG);
+ if (reg > 0 && reg & 0x800)
+ break;
+ usleep_range(1000, 1500);
+ }
+ dev_dbg(dev, "STDP status word %x (i = %d)\n", reg, i);
+ stdp_write(bridge, STDP4028_IRQ_STS_REG, 0x800); //clear
+ /* enable edid addr */
+ stdp_write(bridge, STDP4028_I2C_CTRL_REG, (edid_i2c_reg << 1) | 0x400);
+
+ if (channels == 4)
+ reg = 2;
+ else if (channels == 2)
+ reg = 1;
+ else
+ reg = 0;
+ reg |= chan_cfg << 2;
+ stdp_write(bridge, STDP4028_LVDS_CTRL0_REG, reg);
+
+ bridge->edid_i2c = i2c_new_dummy_device(stdp4028_i2c->adapter, edid_i2c_reg);
+
+ if (!bridge->edid_i2c)
+ return -ENOMEM;
+
+ bridge->bridge.funcs = &stdp4028_funcs;
+ bridge->bridge.of_node = dev->of_node;
+ drm_bridge_add(&bridge->bridge);
+
+ /* Clear pending interrupts since power up. */
+ stdp_write(bridge, STDP4028_DPTX_IRQ_STS_REG, STDP4028_DPTX_IRQ_CLEAR);
+
+ if (stdp4028_i2c->irq) {
+ ret = devm_request_threaded_irq(&stdp4028_i2c->dev,
+ stdp4028_i2c->irq, NULL,
+ stdp4028_irq_handler,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "stdp-lvds-dp", bridge);
+ if (ret)
+ return ret;
+
+ /* enable DPTX IRQs */
+ stdp_write(bridge, STDP4028_IRQ_OUT_CONF_REG,
+ STDP4028_DPTX_DP_IRQ_EN);
+ stdp_write(bridge, STDP4028_DPTX_IRQ_EN_REG,
+ STDP4028_DPTX_IRQ_CONFIG);
+ }
+
+ return 0;
+}
+
+static int stdp4028_remove(struct i2c_client *stdp4028_i2c)
+{
+ struct stdp4028 *stdp = i2c_get_clientdata(stdp4028_i2c);
+
+ drm_bridge_remove(&stdp->bridge);
+ i2c_unregister_device(stdp->edid_i2c);
+
+ kfree(stdp->edid);
+
+ return 0;
+}
+
+static const struct i2c_device_id stdp4028_i2c_table[] = {
+ {"stdp4028-lvds-dp", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, stdp4028_i2c_table);
+
+static const struct of_device_id stdp4028_match[] = {
+ { .compatible = "megachips,stdp4028-lvds-dp" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stdp4028_match);
+
+static struct i2c_driver stdp4028_driver = {
+ .id_table = stdp4028_i2c_table,
+ .probe = stdp4028_probe,
+ .remove = stdp4028_remove,
+ .driver = {
+ .name = "stdp4028-lvds-dp",
+ .of_match_table = stdp4028_match,
+ },
+};
+module_i2c_driver(stdp4028_driver);
+
+MODULE_AUTHOR("Vadim V. Vlasov <vvv19xx at gmail.com>");
+MODULE_DESCRIPTION("STDP4028 LVDS to DP display bridge)");
+MODULE_LICENSE("GPL v2");
--
2.32.0
Подробная информация о списке рассылки Devel