[devel] [#216568] FAILED non-identical noarch packages
Антон Мидюков
midyukov-anton на ya.ru
Сб Ноя 24 14:49:37 MSK 2018
Здравствуйте.
Почему пакеты получаются не идентичными? В них одни и те же файлы - 3d
модели.
Неужели потому, что i586 был собран со второй попытки. Первый раз для
i586 kicad-packages3D случился:
hasher-priv: master: idle time limit (3600 seconds) exceeded
Как с этим быть?
24.11.2018 18:01, Girar Builder awaiter robot пишет:
> http://git.altlinux.org/tasks/216568/logs/events.4.1.log
>
> 2018-Nov-24 08:46:50 :: test-only task #216568 for sisyphus resumed by antohami:
> #100 build 5.0.1-alt1 from /people/antohami/packages/kicad-doc.git fetched at 2018-Nov-18 14:00:13
> #200 build 5.0.1-alt1 from /people/antohami/packages/kicad-i18n.git fetched at 2018-Nov-18 14:02:03
> #300 build 5.0.1-alt1 from /people/antohami/packages/kicad-symbols.git fetched at 2018-Nov-18 15:05:11
> #400 build 5.0.1-alt1 from /people/antohami/packages/kicad-footprints.git fetched at 2018-Nov-18 15:07:30
> #500 build 5.0.1-alt1 from /people/antohami/packages/kicad-templates.git fetched at 2018-Nov-18 15:10:09
> #600 build 5.0.1-alt1 from /people/antohami/packages/kicad-packages3D.git fetched at 2018-Nov-22 07:07:04
> #700 removed
> #1000 removed
> #1100 build 5.0.1-alt1 from /people/antohami/packages/kicad.git fetched at 2018-Nov-23 09:09:05
> 2018-Nov-24 08:50:45 :: created build repo
> 2018-Nov-24 08:50:47 :: [aarch64] #100 kicad-doc.git 5.0.1-alt1: build start
> 2018-Nov-24 08:50:47 :: [x86_64] #100 kicad-doc.git 5.0.1-alt1: build start
> 2018-Nov-24 08:50:47 :: [i586] #100 kicad-doc.git 5.0.1-alt1: build start
> 2018-Nov-24 08:51:34 :: [i586] kicad-doc.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:51:34 :: [x86_64] kicad-doc.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:51:34 :: [i586] #100 kicad-doc.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:51:34 :: [i586] #200 kicad-i18n.git 5.0.1-alt1: build start
> 2018-Nov-24 08:51:34 :: [x86_64] #100 kicad-doc.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:51:34 :: [x86_64] #200 kicad-i18n.git 5.0.1-alt1: build start
> 2018-Nov-24 08:51:55 :: [i586] kicad-i18n.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:51:55 :: [i586] #200 kicad-i18n.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:51:55 :: [i586] #300 kicad-symbols.git 5.0.1-alt1: build start
> 2018-Nov-24 08:51:55 :: [x86_64] kicad-i18n.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:51:55 :: [x86_64] #200 kicad-i18n.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:51:55 :: [x86_64] #300 kicad-symbols.git 5.0.1-alt1: build start
> 2018-Nov-24 08:52:15 :: [i586] kicad-symbols.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:52:15 :: [i586] #300 kicad-symbols.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:52:15 :: [i586] #400 kicad-footprints.git 5.0.1-alt1: build start
> 2018-Nov-24 08:52:15 :: [x86_64] kicad-symbols.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:52:15 :: [x86_64] #300 kicad-symbols.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:52:15 :: [x86_64] #400 kicad-footprints.git 5.0.1-alt1: build start
> 2018-Nov-24 08:52:19 :: [aarch64] kicad-doc.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:52:19 :: [aarch64] #100 kicad-doc.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:52:19 :: [aarch64] #200 kicad-i18n.git 5.0.1-alt1: build start
> 2018-Nov-24 08:52:35 :: [i586] kicad-footprints.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:52:35 :: [i586] #400 kicad-footprints.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:52:35 :: [i586] #500 kicad-templates.git 5.0.1-alt1: build start
> 2018-Nov-24 08:52:36 :: [x86_64] kicad-footprints.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:52:37 :: [x86_64] #400 kicad-footprints.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:52:37 :: [x86_64] #500 kicad-templates.git 5.0.1-alt1: build start
> 2018-Nov-24 08:52:56 :: [i586] kicad-templates.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:52:56 :: [i586] #500 kicad-templates.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:52:56 :: [i586] #600 kicad-packages3D.git 5.0.1-alt1: build start
> 2018-Nov-24 08:52:59 :: [x86_64] kicad-templates.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:52:59 :: [x86_64] #500 kicad-templates.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:52:59 :: [x86_64] #600 kicad-packages3D.git 5.0.1-alt1: build start
> 2018-Nov-24 08:53:13 :: [aarch64] kicad-i18n.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:53:13 :: [aarch64] #200 kicad-i18n.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:53:13 :: [aarch64] #300 kicad-symbols.git 5.0.1-alt1: build start
> 2018-Nov-24 08:54:08 :: [aarch64] kicad-symbols.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:54:08 :: [aarch64] #300 kicad-symbols.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:54:08 :: [aarch64] #400 kicad-footprints.git 5.0.1-alt1: build start
> 2018-Nov-24 08:54:21 :: [x86_64] kicad-packages3D.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:54:21 :: [x86_64] #600 kicad-packages3D.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:54:21 :: [x86_64] #1100 kicad.git 5.0.1-alt1: build start
> 2018-Nov-24 08:55:01 :: [aarch64] kicad-footprints.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:55:01 :: [aarch64] #400 kicad-footprints.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:55:01 :: [aarch64] #500 kicad-templates.git 5.0.1-alt1: build start
> 2018-Nov-24 08:55:56 :: [aarch64] kicad-templates.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:55:56 :: [aarch64] #500 kicad-templates.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:55:56 :: [aarch64] #600 kicad-packages3D.git 5.0.1-alt1: build start
> 2018-Nov-24 08:57:35 :: [aarch64] kicad-packages3D.git 5.0.1-alt1: remote: no need to rebuild
> 2018-Nov-24 08:57:35 :: [aarch64] #600 kicad-packages3D.git 5.0.1-alt1: build OK
> 2018-Nov-24 08:57:35 :: [aarch64] #1100 kicad.git 5.0.1-alt1: build start
> 2018-Nov-24 09:33:07 :: [x86_64] #1100 kicad.git 5.0.1-alt1: build OK
> 2018-Nov-24 10:10:03 :: [i586] #600 kicad-packages3D.git 5.0.1-alt1: build OK
> 2018-Nov-24 10:10:03 :: [i586] #1100 kicad.git 5.0.1-alt1: build start
> 2018-Nov-24 10:20:04 :: [aarch64] #1100 kicad.git 5.0.1-alt1: build OK
> 2018-Nov-24 10:47:40 :: [i586] #1100 kicad.git 5.0.1-alt1: build OK
> 2018-Nov-24 10:50:25 :: build check OK
> --- kicad-packages3D-5.0.1-alt1.noarch.rpm.x86_64 2018-11-24 10:51:57.225545652 +0000
> +++ kicad-packages3D-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:51:57.234545713 +0000
> @@ -1,3 +1,3 @@
> -Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
> -Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
> +Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
> +Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
> Requires: rpmlib(PayloadIsLzma)
> error (#600): non-identical noarch packages
> --- kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.x86_64 2018-11-24 10:52:40.959840009 +0000
> +++ kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:53:24.910135819 +0000
> @@ -6768,3 +6768,3 @@
> Requires: rpmlib(PayloadIsLzma)
> -Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
> +Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
> Provides: kicad-packages3D-part1 = 5.0.1-alt1
> error (#600): non-identical noarch packages
> --- kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.x86_64 2018-11-24 10:53:34.386199597 +0000
> +++ kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:53:43.435260502 +0000
> @@ -2832,3 +2832,3 @@
> Requires: rpmlib(PayloadIsLzma)
> -Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
> +Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
> Provides: kicad-packages3D-part2 = 5.0.1-alt1
> error (#600): non-identical noarch packages
> --- kicad-packages3D-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:55:29.307973086 +0000
> +++ kicad-packages3D-5.0.1-alt1.noarch.rpm.aarch64 2018-11-24 10:55:29.315973139 +0000
> @@ -1,3 +1,3 @@
> -Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
> -Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
> +Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
> +Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
> Requires: rpmlib(PayloadIsLzma)
> error (#600): non-identical noarch packages
> --- kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:56:12.430263322 +0000
> +++ kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.aarch64 2018-11-24 10:56:55.606553923 +0000
> @@ -6768,3 +6768,3 @@
> Requires: rpmlib(PayloadIsLzma)
> -Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1
> +Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1
> Provides: kicad-packages3D-part1 = 5.0.1-alt1
> error (#600): non-identical noarch packages
> --- kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.i586 2018-11-24 10:57:04.585614356 +0000
> +++ kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.aarch64 2018-11-24 10:57:13.682675585 +0000
> @@ -2832,3 +2832,3 @@
> Requires: rpmlib(PayloadIsLzma)
> -Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1
> +Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1
> Provides: kicad-packages3D-part2 = 5.0.1-alt1
> error (#600): non-identical noarch packages
> 2018-Nov-24 11:01:05 :: noarch check FAILED
> 2018-Nov-24 11:01:05 :: task #216568 for sisyphus FAILED
--
С уважением, Антон Мидюков <antohami на altlinux.org>
Подробная информация о списке рассылки Devel