[devel] Не ставится desktop на бук HP-6110
Motsyo Gennadi aka Drool
=?iso-8859-1?q?motsyo_=CE=C1_gmail=2Ecom?=
Пн Июн 18 23:24:27 MSD 2007
Stanislav Ievlev пишет:
> А если без acpi?
Шутите? :-) Это первое что он попробовал. Опыта в войне с никсами ему
хватает.
> On Wed, May 30, 2007 at 02:01:32PM +0300, Motsyo Gennadi aka Drool wrote:
>> Кто может помочь/просветить/разобраться?
>> Мыло человека - Igor Didenko <ididenko at gmail dot com>
>> Это мой провайдер.
>
>> Date: Wed, 30 May 2007 13:37:27 +0300
>> From: Igor Didenko <ididenko на gmail.com>
>> To: Motsyo Gennadi aka Drool <motsyo на gmail.com>
>> Subject: Re: [Fwd: Re: [Comm] Alt Linux 4.0 на DVD. Где взять?]
>>
>> Motsyo Gennadi aka Drool пишет:
>>> Igor Didenko пишет:
>>>> Motsyo Gennadi aka Drool пишет:
>>>>> Igor Didenko пишет:
>>>>>> Привет!!!
>>>>>> Чего то у меня нифига не ставится второй системой на бук HP-6110 Alt
>>>>>> последний скачанный двд - проходит копирование всех пакетов и
>>>>>> вырубается
>>>>>> вообще нафиг от питания - провозыкался целый вечер - плюнул и поставил
>>>>>> назад седьмую кубунту - засада однако :-(
>>>>> Вывод lspci -v сюда - я в рассылку перешлю.
>>>>> С noapic пробовал?
>>>>>
>>>> однако, у меня нормальный испытательный бук - на нем жили (по очереди)
>>>> FreeBSD 4.11-6.2, PCBSD 1.0-1.3, Frenzy 0.3-1.0, SUSE 7.3-10.2, Ubuntu
>>>> (Kubuntu) 5.10-7.04, Alt Master 2.4 (разные Debian Mandriva и др.).
>>>>
>>>> Как я тебе выведу при инсталляции lspci -v если он вырубается нафиг!
>>> Там же сейчас что-то стоит? Вот оттуда это и сделай. Какая разница
>>> какой никс там сидит :-)
>>>
>> да не проблема!
>>
>
>> [ 0.000000] Linux version 2.6.20-15-generic (root на palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
>> [ 0.000000] BIOS-provided physical RAM map:
>> [ 0.000000] sanitize start
>> [ 0.000000] sanitize end
>> [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>> [ 0.000000] copy_e820_map() type is E820_RAM
>> [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>> [ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
>> [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f6d0000 end: 000000001f7d0000 type: 1
>> [ 0.000000] copy_e820_map() type is E820_RAM
>> [ 0.000000] copy_e820_map() start: 000000001f7d0000 size: 000000000001fc00 end: 000000001f7efc00 type: 2
>> [ 0.000000] copy_e820_map() start: 000000001f7efc00 size: 000000000000b400 end: 000000001f7fb000 type: 4
>> [ 0.000000] copy_e820_map() start: 000000001f7fb000 size: 0000000000005000 end: 000000001f800000 type: 2
>> [ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>> [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000002000 end: 00000000fec02000 type: 2
>> [ 0.000000] copy_e820_map() start: 00000000fed20000 size: 000000000007b000 end: 00000000fed9b000 type: 2
>> [ 0.000000] copy_e820_map() start: 00000000feda0000 size: 0000000000020000 end: 00000000fedc0000 type: 2
>> [ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000100000 end: 00000000ffc00000 type: 2
>> [ 0.000000] copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7d0000 (usable)
>> [ 0.000000] BIOS-e820: 000000001f7d0000 - 000000001f7efc00 (reserved)
>> [ 0.000000] BIOS-e820: 000000001f7efc00 - 000000001f7fb000 (ACPI NVS)
>> [ 0.000000] BIOS-e820: 000000001f7fb000 - 000000001f800000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
>> [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>> [ 0.000000] 0MB HIGHMEM available.
>> [ 0.000000] 503MB LOWMEM available.
>> [ 0.000000] Entering add_active_range(0, 0, 128976) 0 entries of 256 used
>> [ 0.000000] Zone PFN ranges:
>> [ 0.000000] DMA 0 -> 4096
>> [ 0.000000] Normal 4096 -> 128976
>> [ 0.000000] HighMem 128976 -> 128976
>> [ 0.000000] early_node_map[1] active PFN ranges
>> [ 0.000000] 0: 0 -> 128976
>> [ 0.000000] On node 0 totalpages: 128976
>> [ 0.000000] DMA zone: 32 pages used for memmap
>> [ 0.000000] DMA zone: 0 pages reserved
>> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
>> [ 0.000000] Normal zone: 975 pages used for memmap
>> [ 0.000000] Normal zone: 123905 pages, LIFO batch:31
>> [ 0.000000] HighMem zone: 0 pages used for memmap
>> [ 0.000000] DMI 2.3 present.
>> [ 0.000000] ACPI: RSDP (v000 HP ) @ 0x000fe270
>> [ 0.000000] ACPI: RSDT (v001 HP 099C 0x21110520 HP 0x00000001) @ 0x1f7efc84
>> [ 0.000000] ACPI: FADT (v002 HP 099C 0x00000002 HP 0x00000001) @ 0x1f7efc00
>> [ 0.000000] ACPI: MADT (v001 HP 099C 0x00000001 HP 0x00000001) @ 0x1f7efcb4
>> [ 0.000000] ACPI: MCFG (v001 HP 099C 0x00000001 HP 0x00000001) @ 0x1f7efd10
>> [ 0.000000] ACPI: DSDT (v001 HP DAU00 0x00010000 MSFT 0x0100000e) @ 0x00000000
>> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
>> [ 0.000000] ACPI: Local APIC address 0xfec01000
>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> [ 0.000000] Processor #0 6:13 APIC version 20
>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> [ 0.000000] ACPI: IRQ0 used by override.
>> [ 0.000000] ACPI: IRQ2 used by override.
>> [ 0.000000] ACPI: IRQ9 used by override.
>> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>> [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:c0800000)
>> [ 0.000000] Detected 1396.596 MHz processor.
>> [ 21.164817] Built 1 zonelists. Total pages: 127969
>> [ 21.164822] Kernel command line: root=UUID=4e405c9b-d1d3-4f65-8ae1-6e9c7b32efc7 ro quiet splash locale=ru_RU
>> [ 21.165030] mapped APIC to ffffd000 (fec01000)
>> [ 21.165033] mapped IOAPIC to ffffc000 (fec00000)
>> [ 21.165037] Enabling fast FPU save and restore... done.
>> [ 21.165041] Enabling unmasked SIMD FPU exception support... done.
>> [ 21.165050] Initializing CPU#0
>> [ 21.165133] PID hash table entries: 2048 (order: 11, 8192 bytes)
>> [ 21.167225] Console: colour VGA+ 80x25
>> [ 21.167449] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>> [ 21.167723] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>> [ 21.183117] Memory: 500288k/515904k available (1992k kernel code, 15124k reserved, 893k data, 328k init, 0k highmem)
>> [ 21.183129] virtual kernel memory layout:
>> [ 21.183130] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
>> [ 21.183132] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
>> [ 21.183134] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
>> [ 21.183135] lowmem : 0xc0000000 - 0xdf7d0000 ( 503 MB)
>> [ 21.183137] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
>> [ 21.183138] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
>> [ 21.183140] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
>> [ 21.183145] Checking if this processor honours the WP bit even in supervisor mode... Ok.
>> [ 21.261112] Calibrating delay using timer specific routine.. 2796.20 BogoMIPS (lpj=5592408)
>> [ 21.261161] Security Framework v1.0.0 initialized
>> [ 21.261172] SELinux: Disabled at boot.
>> [ 21.261192] Mount-cache hash table entries: 512
>> [ 21.261347] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000
>> [ 21.261360] CPU: L1 I cache: 32K, L1 D cache: 32K
>> [ 21.261363] CPU: L2 cache: 1024K
>> [ 21.261366] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000000 00000000 00000000
>> [ 21.261377] Compat vDSO mapped to ffffe000.
>> [ 21.261382] Remapping vsyscall page to ffffe000
>> [ 21.261395] Checking 'hlt' instruction... OK.
>> [ 21.277219] SMP alternatives: switching to UP code
>> [ 21.277433] Freeing SMP alternatives: 11k freed
>> [ 21.277647] Early unpacking initramfs... done
>> [ 21.685342] ACPI: Core revision 20060707
>> [ 21.686272] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
>> [ 21.754426] CPU0: Intel(R) Celeron(R) M processor 1.40GHz stepping 08
>> [ 21.754458] Total of 1 processors activated (2796.20 BogoMIPS).
>> [ 21.754652] ENABLING IO-APIC IRQs
>> [ 21.754859] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [ 21.900969] Brought up 1 CPUs
>> [ 21.901256] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>> [ 21.901260] Booting paravirtualized kernel on bare hardware
>> [ 21.901347] Time: 19:03:58 Date: 04/29/107
>> [ 21.901378] NET: Registered protocol family 16
>> [ 21.901479] EISA bus registered
>> [ 21.901484] ACPI: bus type pci registered
>> [ 21.903081] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=3
>> [ 21.903084] PCI: Using configuration type 1
>> [ 21.903086] Setting up standard PCI resources
>> [ 21.927766] ACPI: Interpreter enabled
>> [ 21.927769] ACPI: Using IOAPIC for interrupt routing
>> [ 21.928164] ACPI: PCI Root Bridge [C002] (0000:00)
>> [ 21.928174] PCI: Probing PCI hardware (bus 00)
>> [ 21.928197] ACPI: Assume root bridge [\_SB_.C002] bus is 0
>> [ 21.932732] Boot video device is 0000:00:02.0
>> [ 21.933372] PCI: Enabled ICH6/i801 SMBus device
>> [ 21.933379] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>> [ 21.933384] PCI quirk: region 1100-113f claimed by ICH6 GPIO
>> [ 21.933872] PCI: Transparent bridge - 0000:00:1e.0
>> [ 21.933950] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
>> [ 21.933953] Please report the result to linux-kernel to fix this permanently
>> [ 21.933977] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
>> [ 21.974680] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C068._PRT]
>> [ 21.991271] ACPI: Power Resource [C1C5] (on)
>> [ 21.995409] ACPI: PCI Interrupt Link [C0D8] (IRQs 10 *11)
>> [ 21.995982] ACPI: PCI Interrupt Link [C0D9] (IRQs *10 11)
>> [ 21.996556] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11)
>> [ 21.997137] ACPI: PCI Interrupt Link [C0DB] (IRQs *10 11)
>> [ 21.997706] ACPI: PCI Interrupt Link [C0EE] (IRQs *10 11)
>> [ 21.998277] ACPI: PCI Interrupt Link [C0EF] (IRQs 10 *11)
>> [ 21.998855] ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11)
>> [ 21.999415] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled.
>> [ 22.001454] ACPI: Power Resource [C244] (off)
>> [ 22.001628] ACPI: Power Resource [C245] (off)
>> [ 22.001791] ACPI: Power Resource [C246] (off)
>> [ 22.001959] ACPI: Power Resource [C247] (off)
>> [ 22.002282] Linux Plug and Play Support v0.97 (c) Adam Belay
>> [ 22.002297] pnp: PnP ACPI init
>> [ 22.012226] pnp: PnP ACPI: found 11 devices
>> [ 22.012232] PnPBIOS: Disabled by ACPI PNP
>> [ 22.012276] PCI: Using ACPI for IRQ routing
>> [ 22.012280] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
>> [ 22.073851] NET: Registered protocol family 8
>> [ 22.073854] NET: Registered protocol family 20
>> [ 22.074745] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
>> [ 22.074749] pnp: 00:09: ioport range 0x1000-0x107f could not be reserved
>> [ 22.074753] pnp: 00:09: ioport range 0x1100-0x113f has been reserved
>> [ 22.074759] pnp: 00:09: ioport range 0x1200-0x121f has been reserved
>> [ 22.075055] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>> [ 22.075065] PCI: Bus 3, cardbus bridge: 0000:02:06.0
>> [ 22.075068] IO window: 00003000-000030ff
>> [ 22.075074] IO window: 00003400-000034ff
>> [ 22.075080] PREFETCH window: 20000000-23ffffff
>> [ 22.075087] MEM window: 24000000-27ffffff
>> [ 22.075092] PCI: Bridge: 0000:00:1e.0
>> [ 22.075096] IO window: 3000-3fff
>> [ 22.075103] MEM window: d0000000-d03fffff
>> [ 22.075108] PREFETCH window: 20000000-23ffffff
>> [ 22.075128] PCI: Setting latency timer of device 0000:00:1e.0 to 64
>> [ 22.075152] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 16
>> [ 22.075184] NET: Registered protocol family 2
>> [ 22.112931] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>> [ 22.113020] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>> [ 22.113147] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>> [ 22.113210] TCP: Hash tables configured (established 16384 bind 8192)
>> [ 22.113215] TCP reno registered
>> [ 22.125000] checking if image is initramfs... it is
>> [ 22.930232] Freeing initrd memory: 6999k freed
>> [ 22.930775] audit: initializing netlink socket (disabled)
>> [ 22.930792] audit(1180465438.784:1): initialized
>> [ 22.930950] VFS: Disk quotas dquot_6.5.1
>> [ 22.930973] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>> [ 22.931038] io scheduler noop registered
>> [ 22.931042] io scheduler anticipatory registered
>> [ 22.931044] io scheduler deadline registered
>> [ 22.931057] io scheduler cfq registered (default)
>> [ 22.931422] isapnp: Scanning for PnP cards...
>> [ 23.285637] isapnp: No Plug & Play device found
>> [ 23.321592] Real Time Clock Driver v1.12ac
>> [ 23.321675] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>> [ 23.322597] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 22 (level, low) -> IRQ 17
>> [ 23.322608] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>> [ 23.322693] mice: PS/2 mouse device common for all mice
>> [ 23.323307] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
>> [ 23.323608] input: Macintosh mouse button emulation as /class/input/input0
>> [ 23.323645] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> [ 23.323651] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>> [ 23.323898] PNP: PS/2 Controller [PNP0303:C1C2,PNP0f13:C1C3] at 0x60,0x64 irq 1,12
>> [ 23.326649] i8042.c: Detected active multiplexing controller, rev 1.1.
>> [ 23.327398] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [ 23.327406] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>> [ 23.327409] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>> [ 23.327412] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>> [ 23.327415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>> [ 23.327571] EISA: Probing bus 0 at eisa.0
>> [ 23.327580] Cannot allocate resource for EISA slot 1
>> [ 23.327583] Cannot allocate resource for EISA slot 2
>> [ 23.327585] Cannot allocate resource for EISA slot 3
>> [ 23.327601] Cannot allocate resource for EISA slot 7
>> [ 23.327607] EISA: Detected 0 cards.
>> [ 23.357723] TCP cubic registered
>> [ 23.357733] NET: Registered protocol family 1
>> [ 23.357759] Using IPI No-Shortcut mode
>> [ 23.357832] ACPI: (supports S0 S3 S4 S5)
>> [ 23.357886] Magic number: 7:701:92
>> [ 23.358268] Freeing unused kernel memory: 328k freed
>> [ 23.360488] Time: tsc clocksource has been installed.
>> [ 23.370042] input: AT Translated Set 2 keyboard as /class/input/input1
>> [ 24.610277] Capability LSM initialized
>> [ 24.645367] ACPI: Transitioning device [C248] to D3
>> [ 24.645371] ACPI: Transitioning device [C248] to D3
>> [ 24.645374] ACPI: Fan [C248] (off)
>> [ 24.645622] ACPI: Transitioning device [C249] to D3
>> [ 24.645624] ACPI: Transitioning device [C249] to D3
>> [ 24.645628] ACPI: Fan [C249] (off)
>> [ 24.645874] ACPI: Transitioning device [C24A] to D3
>> [ 24.645876] ACPI: Transitioning device [C24A] to D3
>> [ 24.645879] ACPI: Fan [C24A] (off)
>> [ 24.646125] ACPI: Transitioning device [C24B] to D3
>> [ 24.646127] ACPI: Transitioning device [C24B] to D3
>> [ 24.646130] ACPI: Fan [C24B] (off)
>> [ 24.652636] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>> [ 24.652646] ACPI: Processor [C000] (supports 8 throttling states)
>> [ 24.673683] ACPI: Thermal Zone [TZ1] (52 C)
>> [ 24.688639] ACPI: Thermal Zone [TZ2] (47 C)
>> [ 3.368000] ACPI: Thermal Zone [TZ3] (36 C)
>> [ 3.372000] Time: acpi_pm clocksource has been installed.
>> [ 3.372000] ACPI: Thermal Zone [TZ4] (54 C)
>> [ 3.784000] usbcore: registered new interface driver usbfs
>> [ 3.784000] usbcore: registered new interface driver hub
>> [ 3.784000] usbcore: registered new device driver usb
>> [ 3.788000] USB Universal Host Controller Interface driver v3.0
>> [ 3.788000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>> [ 3.788000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
>> [ 3.788000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>> [ 3.788000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>> [ 3.788000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002000
>> [ 3.788000] usb usb1: configuration #1 chosen from 1 choice
>> [ 3.788000] hub 1-0:1.0: USB hub found
>> [ 3.788000] hub 1-0:1.0: 2 ports detected
>> [ 3.888000] SCSI subsystem initialized
>> [ 3.896000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
>> [ 3.896000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
>> [ 3.896000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>> [ 3.896000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>> [ 3.896000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002020
>> [ 3.896000] usb usb2: configuration #1 chosen from 1 choice
>> [ 3.896000] hub 2-0:1.0: USB hub found
>> [ 3.896000] hub 2-0:1.0: 2 ports detected
>> [ 3.896000] libata version 2.20 loaded.
>> [ 3.936000] ieee1394: Initialized config rom entry `ip1394'
>> [ 4.000000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
>> [ 4.000000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
>> [ 4.000000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>> [ 4.000000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>> [ 4.000000] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00002040
>> [ 4.000000] usb usb3: configuration #1 chosen from 1 choice
>> [ 4.000000] hub 3-0:1.0: USB hub found
>> [ 4.000000] hub 3-0:1.0: 2 ports detected
>> [ 4.104000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20
>> [ 4.104000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
>> [ 4.104000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>> [ 4.104000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>> [ 4.104000] uhci_hcd 0000:00:1d.3: irq 20, io base 0x00002060
>> [ 4.104000] usb usb4: configuration #1 chosen from 1 choice
>> [ 4.104000] hub 4-0:1.0: USB hub found
>> [ 4.104000] hub 4-0:1.0: 2 ports detected
>> [ 4.208000] ata_piix 0000:00:1f.1: version 2.10ac1
>> [ 4.208000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 21
>> [ 4.208000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
>> [ 4.208000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012580 irq 14
>> [ 4.208000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012588 irq 15
>> [ 4.208000] scsi0 : ata_piix
>> [ 4.648000] ata1.00: ata_hpa_resize 1: sectors = 78242976, hpa_sectors = 78242976
>> [ 4.648000] ata1.00: ATA-7: SAMSUNG MP0402H, YQ200-04, max UDMA/100
>> [ 4.648000] ata1.00: 78242976 sectors, multi 16: LBA48
>> [ 4.648000] ata1.01: ATAPI, max MWDMA2
>> [ 4.656000] ata1.00: ata_hpa_resize 1: sectors = 78242976, hpa_sectors = 78242976
>> [ 4.656000] ata1.00: configured for UDMA/100
>> [ 4.820000] ata1.01: configured for MWDMA2
>> [ 4.820000] scsi1 : ata_piix
>> [ 4.820000] ata2: port disabled. ignoring.
>> [ 4.820000] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0402H YQ20 PQ: 0 ANSI: 5
>> [ 4.820000] scsi 0:0:1:0: CD-ROM SONY CD-RW CRX835E KPK4 PQ: 0 ANSI: 5
>> [ 4.824000] ACPI: PCI Interrupt 0000:02:06.2[C] -> GSI 22 (level, low) -> IRQ 17
>> [ 4.876000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d0003000-d00037ff] Max Packet=[2048] IR/IT contexts=[4/8]
>> [ 4.876000] b44.c:v1.01 (Jun 16, 2006)
>> [ 4.876000] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 21
>> [ 4.880000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>> [ 4.880000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
>> [ 4.880000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>> [ 4.880000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>> [ 4.880000] ehci_hcd 0000:00:1d.7: debug port 1
>> [ 4.880000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>> [ 4.880000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd0580000
>> [ 4.884000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>> [ 4.884000] usb usb5: configuration #1 chosen from 1 choice
>> [ 4.884000] hub 5-0:1.0: USB hub found
>> [ 4.884000] hub 5-0:1.0: 8 ports detected
>> [ 4.884000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:c2:db:e5:ab
>> [ 4.900000] sr0: scsi3-mmc drive: 15x/24x writer cd/rw xa/form2 cdda tray
>> [ 4.900000] Uniform CD-ROM driver Revision: 3.20
>> [ 4.900000] sr 0:0:1:0: Attached scsi CD-ROM sr0
>> [ 4.904000] scsi 0:0:0:0: Attached scsi generic sg0 type 0
>> [ 4.904000] sr 0:0:1:0: Attached scsi generic sg1 type 5
>> [ 4.916000] SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
>> [ 4.916000] sda: Write Protect is off
>> [ 4.916000] sda: Mode Sense: 00 3a 00 00
>> [ 4.916000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [ 4.916000] SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
>> [ 4.916000] sda: Write Protect is off
>> [ 4.916000] sda: Mode Sense: 00 3a 00 00
>> [ 4.920000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [ 4.920000] sda: sda1 sda2 sda3 sda4
>> [ 4.968000] sd 0:0:0:0: Attached scsi disk sda
>> [ 5.288000] Attempting manual resume
>> [ 5.288000] swsusp: Resume From Partition 8:4
>> [ 5.288000] PM: Checking swsusp image.
>> [ 5.288000] PM: Resume from disk failed.
>> [ 5.312000] kjournald starting. Commit interval 5 seconds
>> [ 5.312000] EXT3-fs: mounted filesystem with ordered data mode.
>> [ 6.148000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[718b5000298d4ea6]
>> [ 17.184000] NET: Registered protocol family 17
>> [ 17.668000] iTCO_vendor_support: vendor-support=0
>> [ 17.672000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>> [ 17.672000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>> [ 17.672000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>> [ 17.680000] intel_rng: FWH not detected
>> [ 17.692000] Linux agpgart interface v0.102 (c) Dave Jones
>> [ 17.696000] agpgart: Detected an Intel 915GM Chipset.
>> [ 17.696000] agpgart: Detected 7932K stolen memory.
>> [ 17.716000] agpgart: AGP aperture is 256M @ 0xc0000000
>> [ 18.444000] ieee80211_crypt: registered algorithm 'NULL'
>> [ 18.460000] ieee80211: 802.11 data/management/control stack, git-1.1.13
>> [ 18.460000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno на linux.intel.com>
>> [ 18.524000] bcm43xx driver
>> [ 18.524000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 22
>> [ 18.728000] Yenta: CardBus bridge found at 0000:02:06.0 [103c:099c]
>> [ 18.728000] Yenta: Enabling burst memory read transactions
>> [ 18.728000] Yenta: Using INTVAL to route CSC interrupts to PCI
>> [ 18.728000] Yenta: Routing CardBus interrupts to PCI
>> [ 18.728000] Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64
>> [ 18.788000] input: PC Speaker as /class/input/input2
>> [ 18.960000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
>> [ 18.960000] Socket status: 30000006
>> [ 18.960000] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>> [ 18.960000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>> [ 18.960000] cs: IO port probe 0x3000-0x3fff: clean.
>> [ 18.960000] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd03fffff
>> [ 18.960000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
>> [ 19.136000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 19.172000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 19.180000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 19.220000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 22
>> [ 19.220000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
>> [ 19.300000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
>> [ 19.300000] serio: Synaptics pass-through port at isa0060/serio4/input0
>> [ 19.344000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
>> [ 19.596000] cs: IO port probe 0x100-0x3af: clean.
>> [ 19.596000] cs: IO port probe 0x3e0-0x4ff: clean.
>> [ 19.600000] cs: IO port probe 0x820-0x8ff: clean.
>> [ 19.600000] cs: IO port probe 0xc00-0xcf7: clean.
>> [ 19.600000] cs: IO port probe 0xa00-0xaff: clean.
>> [ 20.040000] intel8x0_measure_ac97_clock: measured 55371 usecs
>> [ 20.040000] intel8x0: clocking to 48000
>> [ 20.324000] fuse init (API version 7.8)
>> [ 20.392000] lp: driver loaded but no devices found
>> [ 20.436000] Adding 610460k swap on /dev/disk/by-uuid/1f883e4a-b560-4380-b393-92d84c5f2f68. Priority:-1 extents:1 across:610460k
>> [ 20.644000] EXT3 FS on sda3, internal journal
>> [ 23.540000] NTFS driver 2.1.28 [Flags: R/O MODULE].
>> [ 23.612000] NTFS volume version 3.1.
>> [ 28.000000] ACPI: Video Device [C055] (multi-head: yes rom: no post: no)
>> [ 28.064000] ACPI: Battery Slot [C174] (battery present)
>> [ 28.064000] ACPI: Battery Slot [C173] (battery absent)
>> [ 28.120000] input: Power Button (FF) as /class/input/input4
>> [ 28.124000] ACPI: Power Button (FF) [PWRF]
>> [ 28.168000] input: Sleep Button (CM) as /class/input/input5
>> [ 28.172000] ACPI: Sleep Button (CM) [C1E8]
>> [ 28.220000] input: Lid Switch as /class/input/input6
>> [ 28.224000] ACPI: Lid Switch [C1E9]
>> [ 28.240000] No dock devices found.
>> [ 28.256000] ACPI: AC Adapter [C172] (on-line)
>> [ 28.308000] ibm_acpi: ec object not found
>> [ 28.328000] Using specific hotkey driver
>> [ 28.376000] pcc_acpi: loading...
>> [ 28.428000] wmi_add device=ddccec00
>> [ 28.428000] calling WQBA
>> [ 32.232000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 32.480000] ppdev: user-space parallel port driver
>> [ 33.124000] apm: BIOS not found.
>> [ 33.728000] Bluetooth: Core ver 2.11
>> [ 33.728000] NET: Registered protocol family 31
>> [ 33.728000] Bluetooth: HCI device and connection manager initialized
>> [ 33.728000] Bluetooth: HCI socket layer initialized
>> [ 33.772000] Bluetooth: L2CAP ver 2.8
>> [ 33.772000] Bluetooth: L2CAP socket layer initialized
>> [ 33.936000] Bluetooth: RFCOMM socket layer initialized
>> [ 33.936000] Bluetooth: RFCOMM TTY layer initialized
>> [ 33.936000] Bluetooth: RFCOMM ver 1.8
>> [ 35.008000] [drm] Initialized drm 1.1.0 20060810
>> [ 35.012000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 21
>> [ 35.016000] [drm] Initialized i915 1.6.0 20060119 on minor 0
>> [ 37.192000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 50.216000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 50.488000] NET: Registered protocol family 10
>> [ 50.488000] lo: Disabled Privacy Extensions
>> [ 50.488000] ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [ 62.016000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 71.604000] ISO 9660 Extensions: Microsoft Joliet Level 3
>> [ 71.720000] ISO 9660 Extensions: RRIP_1991A
>> [ 86.824000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 111.644000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 136.468000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 160.948000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 285.328000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 366.192000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 410.080000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 534.452000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 659.168000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 665.176000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 783.556000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 908.228000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 1032.652000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 1073.152000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 1157.016000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 1281.380000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 1400.132000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 1405.752000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 1430.572000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 1455.412000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 1573.144000] ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [ 1579.996000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 1617.300000] ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [ 1704.812000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [ 1723.356000] ACPI: PCI interrupt for device 0000:02:0e.0 disabled
>> [ 1723.564000] ACPI: PCI interrupt for device 0000:02:04.0 disabled
>> [ 1723.868000] ieee80211_crypt: unregistered algorithm 'NULL'
>> [ 1725.864000] PM: suspend-to-disk mode set to 'shutdown'
>> [ 1725.864000] Disabling non-boot CPUs ...
>> [ 1725.864000] Stopping tasks ... done.
>> [ 1725.908000] Shrinking memory... -\|/done (32722 pages freed)
>> [ 1726.536000] Freed 130888 kbytes in 0.64 seconds (204.51 MB/s)
>> [ 1726.536000] Suspending console(s)
>> [ 1726.536000] platform bluetooth: freeze
>> [ 1726.536000] ac97 0-0:AD1981B: freeze
>> [ 1726.536000] iTCO_wdt iTCO_wdt: freeze
>> [ 1726.536000] usbdev5.1_ep81: PM: suspend 0->1, parent 5-0:1.0 already 2
>> [ 1726.536000] hub 5-0:1.0: PM: suspend 2-->1
>> [ 1726.536000] hub 5-0:1.0: PM: suspend 2->1, parent usb5 already 2
>> [ 1726.536000] usbdev5.1_ep00: PM: suspend 0->1, parent usb5 already 2
>> [ 1726.536000] usb usb5: PM: suspend 2-->1
>> [ 1726.536000] sr 0:0:1:0: freeze
>> [ 1726.848000] sd 0:0:0:0: freeze
>> [ 1727.052000] usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2
>> [ 1727.052000] hub 4-0:1.0: PM: suspend 2-->1
>> [ 1727.052000] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2
>> [ 1727.052000] usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2
>> [ 1727.052000] usb usb4: PM: suspend 2-->1
>> [ 1727.052000] usbdev3.1_ep81: PM: suspend 0->1, parent 3-0:1.0 already 2
>> [ 1727.052000] hub 3-0:1.0: PM: suspend 2-->1
>> [ 1727.052000] hub 3-0:1.0: PM: suspend 2->1, parent usb3 already 2
>> [ 1727.052000] usbdev3.1_ep00: PM: suspend 0->1, parent usb3 already 2
>> [ 1727.052000] usb usb3: PM: suspend 2-->1
>> [ 1727.052000] usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2
>> [ 1727.052000] hub 2-0:1.0: PM: suspend 2-->1
>> [ 1727.052000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2
>> [ 1727.052000] usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2
>> [ 1727.052000] usb usb2: PM: suspend 2-->1
>> [ 1727.052000] usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2
>> [ 1727.052000] hub 1-0:1.0: PM: suspend 2-->1
>> [ 1727.052000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2
>> [ 1727.052000] usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2
>> [ 1727.052000] usb usb1: PM: suspend 2-->1
>> [ 1727.052000] platform vesafb.0: freeze
>> [ 1727.052000] platform eisa.0: freeze
>> [ 1727.052000] i8042 i8042: freeze
>> [ 1727.528000] serial8250 serial8250: freeze
>> [ 1727.528000] pcspkr pcspkr: freeze
>> [ 1727.528000] system 00:0a: freeze
>> [ 1727.528000] system 00:09: freeze
>> [ 1727.528000] system 00:08: freeze
>> [ 1727.528000] i8042 aux 00:07: freeze
>> [ 1727.528000] i8042 kbd 00:06: freeze
>> [ 1727.528000] pnp 00:05: freeze
>> [ 1727.528000] pnp 00:04: freeze
>> [ 1727.528000] pnp 00:03: freeze
>> [ 1727.528000] pnp 00:02: freeze
>> [ 1727.528000] pnp 00:01: freeze
>> [ 1727.528000] system 00:00: freeze
>> [ 1727.528000] pci 0000:02:0e.0: freeze
>> [ 1727.528000] ohci1394 0000:02:06.2: freeze
>> [ 1727.528000] ohci1394 does not fully support suspend and resume yet
>> [ 1727.544000] yenta_cardbus 0000:02:06.0: freeze
>> [ 1727.544000] pci 0000:02:04.0: freeze
>> [ 1727.544000] pci 0000:00:1f.3: freeze
>> [ 1727.544000] ata_piix 0000:00:1f.1: freeze
>> [ 1727.544000] ata2: ACPI get timing mode failed.
>> [ 1727.544000] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>> [ 1727.544000] pci 0000:00:1f.0: freeze
>> [ 1727.544000] pci 0000:00:1e.3: freeze
>> [ 1727.544000] Intel ICH 0000:00:1e.2: freeze
>> [ 1727.544000] ACPI: PCI interrupt for device 0000:00:1e.2 disabled
>> [ 1727.544000] pci 0000:00:1e.0: freeze
>> [ 1727.544000] ehci_hcd 0000:00:1d.7: freeze
>> [ 1727.544000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>> [ 1727.560000] uhci_hcd 0000:00:1d.3: freeze
>> [ 1727.560000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>> [ 1727.560000] uhci_hcd 0000:00:1d.2: freeze
>> [ 1727.560000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>> [ 1727.560000] uhci_hcd 0000:00:1d.1: freeze
>> [ 1727.560000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>> [ 1727.560000] uhci_hcd 0000:00:1d.0: freeze
>> [ 1727.560000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>> [ 1727.560000] pci 0000:00:02.1: freeze
>> [ 1727.560000] pci 0000:00:02.0: freeze
>> [ 1727.560000] agpgart-intel 0000:00:00.0: freeze
>> [ 1727.560000] acpi acpi: freeze
>> [ 1727.568000] PM: snapshotting memory.
>> [ 1727.568000] platform bluetooth: LATE freeze
>> [ 1727.568000] iTCO_wdt iTCO_wdt: LATE freeze
>> [ 1727.568000] platform vesafb.0: LATE freeze
>> [ 1727.568000] platform eisa.0: LATE freeze
>> [ 1727.568000] i8042 i8042: LATE freeze
>> [ 1727.568000] serial8250 serial8250: LATE freeze
>> [ 1727.568000] pcspkr pcspkr: LATE freeze
>> [ 1727.568000] pci 0000:02:0e.0: LATE freeze
>> [ 1727.568000] ohci1394 0000:02:06.2: LATE freeze
>> [ 1727.568000] yenta_cardbus 0000:02:06.0: LATE freeze
>> [ 1727.568000] pci 0000:02:04.0: LATE freeze
>> [ 1727.568000] pci 0000:00:1f.3: LATE freeze
>> [ 1727.568000] pci 0000:00:1f.0: LATE freeze
>> [ 1727.568000] pci 0000:00:1e.3: LATE freeze
>> [ 1727.568000] Intel ICH 0000:00:1e.2: LATE freeze
>> [ 1727.568000] pci 0000:00:1e.0: LATE freeze
>> [ 1727.568000] pci 0000:00:02.1: LATE freeze
>> [ 1727.568000] pci 0000:00:02.0: LATE freeze
>> [ 1727.568000] agpgart-intel 0000:00:00.0: LATE freeze
>> [ 1727.568000] swsusp: critical section:
>> [ 1727.568000] swsusp: Need to copy 60438 pages
>> [ 1727.568000] swsusp: Normal pages needed: 60438 + 1024 + 14, available pages: 68536
>> [53417.568000] agpgart-intel 0000:00:00.0: EARLY resume
>> [53417.568000] pci 0000:00:02.0: EARLY resume
>> [53417.568000] pci 0000:00:02.1: EARLY resume
>> [53417.568000] uhci_hcd 0000:00:1d.0: EARLY resume
>> [53417.568000] uhci_hcd 0000:00:1d.1: EARLY resume
>> [53417.568000] uhci_hcd 0000:00:1d.2: EARLY resume
>> [53417.568000] uhci_hcd 0000:00:1d.3: EARLY resume
>> [53417.568000] ehci_hcd 0000:00:1d.7: EARLY resume
>> [53417.568000] pci 0000:00:1e.0: EARLY resume
>> [53417.568000] Intel ICH 0000:00:1e.2: EARLY resume
>> [53417.568000] pci 0000:00:1e.3: EARLY resume
>> [53417.568000] pci 0000:00:1f.0: EARLY resume
>> [53417.568000] PCI: Enabled ICH6/i801 SMBus device
>> [53417.568000] ata_piix 0000:00:1f.1: EARLY resume
>> [53417.568000] pci 0000:00:1f.3: EARLY resume
>> [53417.568000] pci 0000:02:04.0: EARLY resume
>> [53417.568000] yenta_cardbus 0000:02:06.0: EARLY resume
>> [53417.568000] ohci1394 0000:02:06.2: EARLY resume
>> [53417.568000] pci 0000:02:0e.0: EARLY resume
>> [53417.568000] pcspkr pcspkr: EARLY resume
>> [53417.568000] serial8250 serial8250: EARLY resume
>> [53417.568000] i8042 i8042: EARLY resume
>> [53417.568000] platform eisa.0: EARLY resume
>> [53417.568000] platform vesafb.0: EARLY resume
>> [53417.568000] iTCO_wdt iTCO_wdt: EARLY resume
>> [53417.568000] platform bluetooth: EARLY resume
>> [53417.568000] PM: Image restored successfully.
>> [53417.588000] acpi acpi: resuming
>> [53417.616000] agpgart-intel 0000:00:00.0: resuming
>> [53417.636000] pci 0000:00:02.0: resuming
>> [53417.636000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 21
>> [53417.636000] pci 0000:00:02.1: resuming
>> [53417.636000] uhci_hcd 0000:00:1d.0: resuming
>> [53417.636000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>> [53417.636000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
>> [53417.636000] usb usb1: root hub lost power or was reset
>> [53417.636000] uhci_hcd 0000:00:1d.1: resuming
>> [53417.636000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 19
>> [53417.636000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
>> [53417.636000] usb usb2: root hub lost power or was reset
>> [53417.636000] uhci_hcd 0000:00:1d.2: resuming
>> [53417.636000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
>> [53417.636000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
>> [53417.636000] usb usb3: root hub lost power or was reset
>> [53417.636000] uhci_hcd 0000:00:1d.3: resuming
>> [53417.636000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20
>> [53417.636000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
>> [53417.636000] usb usb4: root hub lost power or was reset
>> [53417.636000] ehci_hcd 0000:00:1d.7: resuming
>> [53417.652000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>> [53417.652000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
>> [53417.652000] usb usb5: root hub lost power or was reset
>> [53417.652000] ehci_hcd 0000:00:1d.7: debug port 1
>> [53417.656000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>> [53417.656000] pci 0000:00:1e.0: resuming
>> [53417.656000] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20030200, writing 20060200)
>> [53417.656000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
>> [53417.656000] Intel ICH 0000:00:1e.2: resuming
>> [53417.656000] PM: Writing back config space on device 0000:00:1e.2 at offset 1 (was 2900007, writing 2900003)
>> [53417.656000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 22
>> [53417.656000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
>> [53418.660000] pci 0000:00:1e.3: resuming
>> [53418.660000] pci 0000:00:1f.0: resuming
>> [53418.660000] ata_piix 0000:00:1f.1: resuming
>> [53418.660000] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2880001, writing 2880005)
>> [53418.660000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 21
>> [53418.660000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
>> [53418.664000] ata2: ACPI set timing mode failed.
>> [53418.664000] ata2: port disabled. ignoring.
>> [53418.664000] pci 0000:00:1f.3: resuming
>> [53418.664000] pci 0000:02:04.0: resuming
>> [53418.664000] PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 6, writing 2)
>> [53418.664000] yenta_cardbus 0000:02:06.0: resuming
>> [53418.664000] PM: Writing back config space on device 0000:02:06.0 at offset f (was 3c4010a, writing 5c0010a)
>> [53418.664000] PM: Writing back config space on device 0000:02:06.0 at offset 3 (was 824010, writing 82a820)
>> [53418.664000] ohci1394 0000:02:06.2: resuming
>> [53418.680000] PM: Writing back config space on device 0000:02:06.2 at offset f (was 4020300, writing 402030a)
>> [53418.680000] PM: Writing back config space on device 0000:02:06.2 at offset 5 (was 0, writing d0004000)
>> [53418.680000] PM: Writing back config space on device 0000:02:06.2 at offset 4 (was 0, writing d0003000)
>> [53418.680000] PM: Writing back config space on device 0000:02:06.2 at offset 3 (was 800000, writing 804010)
>> [53418.680000] PM: Writing back config space on device 0000:02:06.2 at offset 1 (was 2100000, writing 2100006)
>> [53418.728000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d0003000-d00037ff] Max Packet=[2048] IR/IT contexts=[4/8]
>> [53418.728000] pci 0000:02:0e.0: resuming
>> [53418.728000] PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was 100006, writing 100002)
>> [53418.728000] system 00:00: resuming
>> [53418.728000] pnp 00:01: resuming
>> [53418.728000] pnp 00:02: resuming
>> [53418.728000] pnp 00:03: resuming
>> [53418.728000] pnp 00:04: resuming
>> [53418.728000] pnp 00:05: resuming
>> [53418.728000] i8042 kbd 00:06: resuming
>> [53418.728000] pnp: Device 00:06 does not support activation.
>> [53418.728000] i8042 aux 00:07: resuming
>> [53418.728000] pnp: Device 00:07 does not support activation.
>> [53418.728000] system 00:08: resuming
>> [53418.728000] system 00:09: resuming
>> [53418.728000] system 00:0a: resuming
>> [53418.728000] pcspkr pcspkr: resuming
>> [53418.728000] serial8250 serial8250: resuming
>> [53418.728000] i8042 i8042: resuming
>> [53418.728000] atkbd serio0: resuming
>> [53418.764000] platform eisa.0: resuming
>> [53418.764000] serio serio1: resuming
>> [53418.764000] serio serio2: resuming
>> [53418.764000] serio serio3: resuming
>> [53418.764000] psmouse serio4: resuming
>> [53419.352000] platform vesafb.0: resuming
>> [53419.352000] usb usb1: resuming
>> [53419.392000] usb usb2: resuming
>> [53419.432000] usb usb3: resuming
>> [53419.472000] usb usb4: resuming
>> [53419.512000] sd 0:0:0:0: resuming
>> [53419.512000] sr 0:0:1:0: resuming
>> [53419.512000] usb usb5: resuming
>> [53419.532000] iTCO_wdt iTCO_wdt: resuming
>> [53419.532000] serio serio5: resuming
>> [53419.532000] ac97 0-0:AD1981B: resuming
>> [53419.532000] platform bluetooth: resuming
>> [53419.532000] Restarting tasks ... done.
>> [53420.068000] Enabling non-boot CPUs ...
>> [53420.112000] ata1.00: ata_hpa_resize 1: sectors = 78242976, hpa_sectors = 78242976
>> [53420.112000] ata1.00: limited to UDMA/33 due to 40-wire cable
>> [53420.120000] ata1.00: ata_hpa_resize 1: sectors = 78242976, hpa_sectors = 78242976
>> [53420.120000] ata1.00: configured for UDMA/33
>> [53420.284000] ata1.01: configured for MWDMA2
>> [53420.284000] SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
>> [53420.284000] sda: Write Protect is off
>> [53420.284000] sda: Mode Sense: 00 3a 00 00
>> [53420.284000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [53420.300000] SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
>> [53420.316000] sda: Write Protect is off
>> [53420.316000] sda: Mode Sense: 00 3a 00 00
>> [53420.332000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [53424.112000] b44.c:v1.01 (Jun 16, 2006)
>> [53424.112000] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 21
>> [53424.116000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:c2:db:e5:ab
>> [53424.228000] ieee80211_crypt: registered algorithm 'NULL'
>> [53424.256000] ieee80211: 802.11 data/management/control stack, git-1.1.13
>> [53424.256000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno на linux.intel.com>
>> [53424.384000] bcm43xx driver
>> [53424.388000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 22
>> [53424.748000] ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [53424.896000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [53425.092000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [53425.296000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [53425.308000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>> [53426.600000] input: Power Button (FF) as /class/input/input7
>> [53426.604000] ACPI: Power Button (FF) [PWRF]
>> [53426.604000] input: Sleep Button (CM) as /class/input/input8
>> [53426.604000] ACPI: Sleep Button (CM) [C1E8]
>> [53426.604000] input: Lid Switch as /class/input/input9
>> [53426.604000] ACPI: Lid Switch [C1E9]
>> [53427.704000] ACPI: Transitioning device [C248] to D3
>> [53427.704000] ACPI: Transitioning device [C248] to D3
>> [53427.704000] ACPI: Fan [C248] (off)
>> [53427.708000] ACPI: Transitioning device [C249] to D3
>> [53427.708000] ACPI: Transitioning device [C249] to D3
>> [53427.708000] ACPI: Fan [C249] (off)
>> [53427.708000] ACPI: Transitioning device [C24A] to D3
>> [53427.708000] ACPI: Transitioning device [C24A] to D3
>> [53427.708000] ACPI: Fan [C24A] (off)
>> [53427.708000] ACPI: Transitioning device [C24B] to D3
>> [53427.708000] ACPI: Transitioning device [C24B] to D3
>> [53427.708000] ACPI: Fan [C24B] (off)
>> [53427.716000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>> [53427.720000] ACPI: Processor [C000] (supports 8 throttling states)
>> [53427.736000] ACPI: Thermal Zone [TZ1] (45 C)
>> [53427.744000] ACPI: Thermal Zone [TZ2] (29 C)
>> [53427.756000] ACPI: Thermal Zone [TZ3] (27 C)
>> [53427.756000] ACPI: Thermal Zone [TZ4] (0 C)
>> [53427.836000] ACPI: AC Adapter [C172] (on-line)
>> [53427.852000] ACPI: Battery Slot [C174] (battery present)
>> [53427.852000] ACPI: Battery Slot [C173] (battery absent)
>
>> 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, fast devsel, latency 0
>> Capabilities: [e0] Vendor Specific Information
>>
>> 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA])
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, fast devsel, latency 0, IRQ 21
>> Memory at d0400000 (32-bit, non-prefetchable) [size=512K]
>> I/O ports at 7000 [size=8]
>> Memory at c0000000 (32-bit, prefetchable) [size=256M]
>> Memory at d0480000 (32-bit, non-prefetchable) [size=256K]
>> Capabilities: [d0] Power Management version 2
>>
>> 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, fast devsel, latency 0
>> Memory at d0500000 (32-bit, non-prefetchable) [size=512K]
>> Capabilities: [d0] Power Management version 2
>>
>> 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, medium devsel, latency 0, IRQ 18
>> I/O ports at 2000 [size=32]
>>
>> 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI])
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, medium devsel, latency 0, IRQ 19
>> I/O ports at 2020 [size=32]
>>
>> 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI])
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, medium devsel, latency 0, IRQ 16
>> I/O ports at 2040 [size=32]
>>
>> 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI])
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, medium devsel, latency 0, IRQ 20
>> I/O ports at 2060 [size=32]
>>
>> 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, medium devsel, latency 0, IRQ 18
>> Memory at d0580000 (32-bit, non-prefetchable) [size=1K]
>> Capabilities: [50] Power Management version 2
>> Capabilities: [58] Debug port
>>
>> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
>> Flags: bus master, fast devsel, latency 0
>> Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
>> I/O behind bridge: 00003000-00003fff
>> Memory behind bridge: d0000000-d03fffff
>> Prefetchable memory behind bridge: 0000000020000000-0000000023ffffff
>> Capabilities: [50] Subsystem: Hewlett-Packard Company NX6110/NC6120
>>
>> 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, medium devsel, latency 0, IRQ 22
>> I/O ports at 2100 [size=256]
>> I/O ports at 2200 [size=64]
>> Memory at d0581000 (32-bit, non-prefetchable) [size=512]
>> Memory at d0582000 (32-bit, non-prefetchable) [size=256]
>> Capabilities: [50] Power Management version 2
>>
>> 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: medium devsel, IRQ 17
>> I/O ports at 2400 [size=256]
>> I/O ports at 2500 [size=128]
>> Capabilities: [50] Power Management version 2
>>
>> 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, medium devsel, latency 0
>>
>> 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, medium devsel, latency 0, IRQ 21
>> I/O ports at 01f0 [size=8]
>> I/O ports at 03f4 [size=1]
>> I/O ports at 0170 [size=8]
>> I/O ports at 0374 [size=1]
>> I/O ports at 2580 [size=16]
>>
>> 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
>> Flags: medium devsel
>> I/O ports at 1200 [size=32]
>>
>> 02:04.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
>> Subsystem: Hewlett-Packard Company MX6125
>> Flags: bus master, fast devsel, latency 64, IRQ 22
>> Memory at d0000000 (32-bit, non-prefetchable) [size=8K]
>>
>> 02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, medium devsel, latency 168, IRQ 16
>> Memory at d0002000 (32-bit, non-prefetchable) [size=4K]
>> Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
>> Memory window 0: 20000000-23fff000 (prefetchable)
>> Memory window 1: 24000000-27fff000
>> I/O window 0: 00003000-000030ff
>> I/O window 1: 00003400-000034ff
>> 16-bit legacy interface ports at 0001
>>
>> 02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, medium devsel, latency 64, IRQ 17
>> Memory at d0003000 (32-bit, non-prefetchable) [size=2K]
>> Memory at d0004000 (32-bit, non-prefetchable) [size=16K]
>> Capabilities: [44] Power Management version 2
>>
>> 02:0e.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
>> Subsystem: Hewlett-Packard Company NX6110/NC6120
>> Flags: bus master, fast devsel, latency 64, IRQ 21
>> Memory at d000e000 (32-bit, non-prefetchable) [size=8K]
>> Capabilities: [40] Power Management version 2
>>
>
>
>> _______________________________________________
>> Devel mailing list
>> Devel на lists.altlinux.org
>> https://lists.altlinux.org/mailman/listinfo/devel
>
> _______________________________________________
> Devel mailing list
> Devel на lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/devel
Подробная информация о списке рассылки Devel