[d-kernel] [PATCH 18/30] arm64: dts: rockchip: add HDMI support to rk3588-jaguar

[Anton Midyukov]

From: Heiko Stuebner <heiko.stuebner на cherry.de>

The jaguar has an hdmi output port, which is connected
to the hdmi0 controller of the rk3588.

Add the necessary plumbing to enable it using the recently merged
hdmi-qp controller.

Signed-off-by: Heiko Stuebner <heiko.stuebner на cherry.de>
Tested-by: Quentin Schulz <quentin.schulz на cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz на cherry.de>
Link: https://lore.kernel.org/r/20241024151403.1748554-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko на sntech.de>
(cherry picked from commit 3cf1add5adf67641d7b0b85310819511f8fe6556)
Signed-off-by: Anton Midyukov <antohami на altlinux.org>
---
 .../arm64/boot/dts/rockchip/rk3588-jaguar.dts | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
index e61c5731fb99f..29d4c069f232f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
@@ -8,6 +8,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3588.dtsi"
 
@@ -58,6 +59,17 @@ emmc_pwrseq: emmc-pwrseq {
 		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -271,6 +283,29 @@ &gpu {
 	status = "okay";
 };
 
+&hdmi0 {
+	/* No CEC on Jaguar */
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>;
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-0 = <&i2c0m2_xfer>;
 	status = "okay";
@@ -863,3 +898,18 @@ &usb_host1_ehci {
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint на ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
-- 
2.42.4