[d-kernel] [PATCH 22/30] arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB

[Anton Midyukov]

From: Andy Yan <andyshrk на 163.com>

As the hdmi-qp controller recently get merged, we can enable the
HDMI0 display on this board now.

Signed-off-by: Andy Yan <andyshrk на 163.com>
Link: https://lore.kernel.org/r/20241028123503.384866-2-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko на sntech.de>
(cherry picked from commit ec70819521b743ba7394013f98f216fda766d8a5)
Signed-off-by: Anton Midyukov <antohami на altlinux.org>
---
 .../dts/rockchip/rk3588-coolpi-cm5-evb.dts    | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
index a4946cdc3bb34..610a610e56eec 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588-coolpi-cm5.dtsi"
 
 / {
@@ -22,6 +23,17 @@ backlight: backlight {
 		pwms = <&pwm2 0 25000 0>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	leds: leds {
 		compatible = "gpio-leds";
 
@@ -101,6 +113,26 @@ vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
 	};
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
 /* M.2 E-Key */
 &pcie2x1l1 {
 	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
@@ -214,3 +246,18 @@ &usb_host1_ehci {
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint на ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
-- 
2.42.4