[d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3

[Alexey Kotovich]

re!

Aleksey Avdeev wrote:
>   Не получается у меня поставить ядро 2.4.22-std-up-alt15 на 
> свой домашний старый пень (на чипсете SIS 5511/2/3).
> 
>   Судя по логу - проблемы с поднятием IDE (файл serial.txt в 
> аттаче). Помогите пожалуйста.
> 
> PS: Для сравнения посылаю сообщения ядра 2.4.20-alt7-up, под 
> которым сейчас и живу (файл dmesg.gz в аттаче). Приношу извинения 
> за размер письма.

попробуй отключить CONFIG_BLK_DEV_IDEPNP (PNP EIDE support), если
таковой имеется в kernel-2.4.22.

--
 
 Alexey                          ICQ:97715595
 --
 Paul's Law:
         You can't fall off the floor.

> Linux version 2.4.22-std-up-alt15 (builder at mash.office.altlinux.ru) (gcc versi
> on 2.96 20000731 (ALT Linux, build 2.96-alt6)) #1 Wed Dec 31 10:12:56 MSK 2003
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 0000000005000000 (usable)
>  BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 80MB LOWMEM available.
> On node 0 totalpages: 20480
> zone(0): 4096 pages.
> zone(1): 16384 pages.
> zone(2): 0 pages.
> DMI not present.
> Kernel command line: root=/dev/md0 ro pci=biosirq acpi=off noapic console=ttyS0
> No local APIC present or hardware disabled
> Initializing CPU#0
> Detected 132.634 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 264.60 BogoMIPS
> Memory: 78292k/81920k available (1193k kernel code, 3240k reserved, 502k data, 1
> 32k init, 0k highmem)
> Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
> Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
> Mount cache hash table entries: 512 (order: 0, 4096 bytes)
> Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
> Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Intel Pentium with F0 0F bug - workaround enabled.
> CPU: Intel Pentium 75 - 200 stepping 0c
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
> mtrr: detected mtrr type: none
> ACPI: Subsystem revision 20031203
> ACPI: Interpreter disabled.
> PCI: PCI BIOS revision 2.10 entry at 0xfda4c, last bus=7
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI: ACPI tables contain no PCI IRQ routing entries
> PCI: Probing PCI hardware (bus 00)
> PCI: Using BIOS Interrupt Routing Table
> PCI: Using BIOS for IRQ routing
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> VFS: Disk quotas vdquot_6.5.1
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_I
> RQ SERIAL_PCI enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> PCI: Assigned IRQ 9 for device 00:0e.0
> Redundant entry in serial pci_table.  Please send the output of
> lspci -vv, this message (12b9,1008,12b9,00ad)
> and the manufacturer and name of serial board or modem board
> to serial-pci-info at lists.sourceforge.net.
> ttyS04 at port 0x4400 (irq = 9) is a 16550A
> NET4: Frame Diverter 0.46
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> SIS5513: IDE controller at PCI slot 00:01.1
> SIS5513: chipset revision 8
> SIS5513: not 100% native mode: will probe irqs later
> SIS5513: SiS551x ATA 16 controller
>     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
> SIS5513: simplex device: DMA disabled
> ide1: SIS5513 Bus-Master DMA disabled (BIOS)
> hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
> hdc: Maxtor 6E030L0, ATA DISK drive
> Unable to handle kernel NULL pointer dereference at virtual address 00000000
>  printing eip:
> 00000000
> *pde = 00000000
> Oops: 0000
> CPU:    0
> EIP:    0010:[<00000000>]    Not tainted
> EFLAGS: 00010292
> eax: 0000000c   ebx: c02f6cc4   ecx: c02f6cc4   edx: 00000004
> esi: c02f6cc4   edi: c02f6c14   ebp: c02f6c14   esp: c10fff24
> ds: 0018   es: 0018   ss: 0018
> Process swapper (pid: 1, stackpage=c10ff000)
> Stack: c01b4308 c02f6cc4 c02f6c14 00000001 0c2f6cc4 c02f6cc4 00000001 000000a1
>        c02f6c14 c01c3b60 c02f6cc4 0000000c 00000418 0000000f 00000246 00000000
>        46000005 00000000 c02787a0 c4f7f000 00000001 c02f67c0 c02f6c14 0008e000
> Call Trace:    [<c01b4308>] [<c01c3b60>] [<c01c4621>] [<c01a6d74>] [<c0105000>]
>   [<c0105077>] [<c0107166>] [<c0105070>]
> 
> Code:  Bad EIP value.
>  <0>Kernel panic: Attempted to kill init!