[d-kernel] std-up-2.4.26-alt6 отвалилось SATA

[Alexei Takaseev]

On Thu, 5 Aug 2004 15:20:16 +0400
Sergey Vlasov <vsu at altlinux.ru> wrote:

> On Thu, Aug 05, 2004 at 08:05:35PM +0900, Alexei Takaseev wrote:
> > Имеется машина на мамке ASUS A7V600, чипсет VIA KT600
> > 
> > При попытке загрузиться на ядре std-up-2.4.26-alt6 имеем такую
> > ругачку:
> > 
> > ---------------------
> > VFS: Mounted root (romfs filesystem) readonly.
> > Using /lib/modules/2.4.26-std-up-alt6/kernel/drivers/scsi/scsi_mod.o
> > SCSI subsystem driver Revision: 1.00
> > Using /lib/modules/2.4.26-std-up-alt6/kernel/drivers/scsi/sd_mod.o
> > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno =
> > 2 Using /lib/modules/2.4.26-std-up-alt6/kernel/drivers/cdrom/cdrom.o
> > Using /lib/modules/2.4.26-std-up-alt6/kernel/drivers/scsi/sr_mod.o
> > kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno =
> > 2 Using /lib/modules/2.4.26-std-up-alt6/kernel/drivers/scsi/libata.o
> > Using /lib/modules/2.4.26-std-up-alt6/kernel/drivers/scsi/sata_via.o
> > insmod: unresolved symbol ata_eng_timeout_Re5dcfd8c
> > insmod: unresolved symbol ata_pci_remove_one_R169736eb
> > insmod: unresolved symbol ata_bmdma_start_pio_R0ee60532
> > insmod: unresolved symbol ata_port_disable_R29fb8f42
> > insmod: unresolved symbol ata_exec_command_pio_Rc20bbe26
> > insmod: unresolved symbol ata_port_stop_R27e4df7e
> > insmod: unresolved symbol ata_interrupt_R3001830e
> > insmod: unresolved symbol ata_add_to_probe_list_R1fe4b672
> > insmod: unresolved symbol ata_std_ports_R9c0148bd
> > insmod: unresolved symbol ata_tf_read_pio_R9bbd52dc
> > insmod: unresolved symbol ata_check_status_pio_R70b42f0b
> > insmod: unresolved symbol ata_tf_load_pio_Red96dd52
> > insmod: unresolved symbol ata_scsi_release_R2ce5fa22
> > insmod: unresolved symbol ata_scsi_bios_param_R8021f007
> > insmod: unresolved symbol sata_phy_reset_R79f481c2
> > insmod: unresolved symbol ata_scsi_detect_Rba671f20
> 
> Что-то знакомое...
> 
> Какая версия пакета mkinitrd-busybox?  Попробуйте откатиться на

mkinitrd-busybox-1.00.pre8-alt1

> mkinitrd-busybox-0.60.5-alt1 и пересоздать initrd.

После отката до mkinitrd-busybox-0.60.5-alt1 и пересоздания initrd все
взлетело нормально.