[Desktop] Не стабилиная работа
Kharitonov A. Dmitry
=?iso-8859-1?q?kharpost_=CE=C1_rambler=2Eru?=
Чт Май 1 18:15:02 MSD 2008
Примерно месяц назад установил ALD и сразу впал в недоумение.
Дело в том, что компьютер зависает с периодичностью от 30 мин до 2
часов. Вначале я думал это связано с нестабильностью ядра, но
долговременное наблюдение показало, что это вроде бы не подтверждается.
Зависания также происходят при старте системы чаще всего при поднятии
/dev и network. Часто до загрузки графической среды доползаю с 3-5 раза.
Иэто уже достало.
Раньше у меня стоял Sisyphus x64 и все работало крайне стабильно, я не
помню ни одного зависания, за исключением случаев, когда я отлаживал
модули ядра под плату сбора информации - но это нормально.
Как мне кажется в данный момент причиной нестабильности является udev.
Подходы с разных сторон к этому зверю успеха пока не принесли. Посему
есть вопросы:
1 Как заставить работать udev по частям, с целью локализации
нестабильной области?
2 Какие есть приемы отладки udev?
3 Какую внятную документацию посоветуете?
4 Вообще требуются всякие полезные советы кто что придумает.
В логах все чисто
[user на localhost ~]$ dmesg
Linux version 2.6.18-std-smp-alt12 (builder на apiary.armor.altlinux.org)
(gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt12)) #1 SMP Mon
Feb 11 00:44:54 MSK 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable)
BIOS-e820: 00000000bffc0000 - 00000000bffce000 (ACPI data)
BIOS-e820: 00000000bffce000 - 00000000bfff0000 (ACPI NVS)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 786368
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 556992 pages, LIFO batch:31
DMI present.
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: TEMPLATE Product ID: APIC at: 0xFEE00000
Processor #0 15:11 APIC version 16
Processor #1 15:11 APIC version 16
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
Detected 2009.378 MHz processor.
Built 1 zonelists. Total pages: 786368
Kernel command line: auto BOOT_IMAGE=ALTLinux ro
root=UUID=0c9c473a-4945-4e41-9e89-a3ee611be6f8 resume=/dev/sda1 panic=30
noapic pci=nomsi acpi=off
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3115168k/3145472k available (1591k kernel code, 29136k reserved,
638k data, 192k init, 2227968k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4022.68 BogoMIPS
(lpj=8045368)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
00002001 00000000 0000001f
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000
00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001
00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
checking if image is initramfs... it is
Freeing initrd memory: 504k freed
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4018.80 BogoMIPS
(lpj=8037614)
CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000
00002001 00000000 0000001f
CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000
00002001 00000000 0000001f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001
00000000 0000001f
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Total of 2 processors activated (8041.49 BogoMIPS).
checking TSC synchronization across 2 CPUs:
CPU#0 had 69 usecs TSC skew, fixed it up.
CPU#1 had -69 usecs TSC skew, fixed it up.
Brought up 2 CPUs
migration_cost=173
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f8030
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x90fa, dseg 0xf0000
PnPBIOS: Resource structure does not contain an end tag.
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:04.0
Boot video device is 0000:02:00.0
PCI: Using IRQ router default [10de/03e0] at 0000:00:01.0
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0xcf8-0xcff could not be reserved
pnp: 00:0a: ioport range 0x800-0x87f has been reserved
pnp: 00:0a: ioport range 0x880-0x8ff has been reserved
pnp: 00:0a: ioport range 0x500-0x57f has been reserved
pnp: 00:0a: ioport range 0x580-0x5ff has been reserved
pnp: 00:0a: ioport range 0xd00-0xd7f has been reserved
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0xcf8-0xcff could not be reserved
PCI: Bridge: 0000:00:04.0
IO window: e000-efff
MEM window: dde00000-ddefffff
PREFETCH window: d0000000-d00fffff
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: ddf00000-dfffffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1209651184.604:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:09.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:09.0:pcie00]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8800000, using 3750k,
total 131072k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:d5a0
vesafb: pmi: set display start = c00cd5d6, set palette = c00cd640
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce
3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size
57947 bytes,<6>...found (800x600, 12886 bytes, v3).
Console: switching to colour frame buffer device 97x34
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 192k freed
Time: pit clocksource has been installed.
Executing init=/init
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
NFORCE-MCP61: chipset revision 162
NFORCE-MCP61: not 100% native mode: will probe irqs later
NFORCE-MCP61: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: TOSHIBA DVD-ROM SD-R1312, ATAPI CD/DVD-ROM drive
hdb: PIONEER DVD-RW DVR-115D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
SCSI subsystem initialized
libata version 2.00 loaded.
sata_nv 0000:00:08.0: version 2.0
PCI: Guessed IRQ 15 for device 0000:00:08.0
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD082 bmdma 0xC880 irq 15
ata2: SATA max UDMA/133 cmd 0xD000 ctl 0xCC02 bmdma 0xC888 irq 15
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8, max UDMA7, 625142448 sectors: LBA48 NCQ (depth 0/32)
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: SAMSUNG HD321KJ Rev: CP10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 < sdb5 >
sd 1:0:0:0: Attached scsi disk sdb
PCI: Guessed IRQ 5 for device 0000:00:08.1
PCI: Setting latency timer of device 0000:00:08.1 to 64
ata3: SATA max UDMA/133 cmd 0xC800 ctl 0xC482 bmdma 0xC000 irq 5
ata4: SATA max UDMA/133 cmd 0xC400 ctl 0xC082 bmdma 0xC008 irq 5
scsi2 : sata_nv
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8, max UDMA7, 976773168 sectors: LBA48 NCQ (depth 0/32)
ata3.00: ata3: dev 0 multi count 16
ata3.00: configured for UDMA/133
scsi3 : sata_nv
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8, max UDMA7, 976773168 sectors: LBA48 NCQ (depth 0/32)
ata4.00: ata4: dev 0 multi count 16
ata4.00: configured for UDMA/133
Vendor: ATA Model: SAMSUNG HD501LJ Rev: CR10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sdc: sdc1
sd 2:0:0:0: Attached scsi disk sdc
Vendor: ATA Model: SAMSUNG HD501LJ Rev: CR10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: drive cache: write back
sdd: sdd1 sdd4 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 >
sd 3:0:0:0: Attached scsi disk sdd
Attempting manual resume
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
PCI: Setting latency timer of device 0000:00:07.0 to 64
forcedeth: using HIGHDMA
Floppy drive(s): fd0 is 1.44M
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
FDC 0 is a post-1991 82077
usbcore: registered new driver usbfs
usbcore: registered new driver hub
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
8139too Fast Ethernet driver 0.9.27
input: PC Speaker as /class/input/input0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
hda: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdb: ATAPI 126X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
eth0: forcedeth.c: subsystem: 01043:8234 bound to 0000:00:07.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 11, io mem 0xdddff000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
PCI: Setting latency timer of device 0000:00:05.0 to 64
input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
ts: Compaq touchscreen protocol output
hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
usb 1-4: new low speed USB device using ohci_hcd and address 2
eth1: RealTek RTL8139 at 0xf8bacc00, 00:e0:4c:eb:e5:e6, IRQ 11
eth1: Identified 8139 chip type 'RTL-8100B/8139D'
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 10, io mem 0xdddfec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
saa7133[0]: found at 0000:01:09.0, rev: 209, irq: 10, latency: 64, mmio:
0xddeff000
saa7133[0]: subsystem: 5ace:6090, board: UNKNOWN/GENERIC
[card=0,autodetected]
saa7133[0]: board init: gpio is 0
saa7133[0]: i2c eeprom 00: ce 5a 90 60 54 20 00 00 00 00 00 00 00 00 00 01
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
usb 1-4: new low speed USB device using ohci_hcd and address 3
Adding 6233180k swap on /dev/sdd1. Priority:-1 extents:1 across:6233180k
usb 1-4: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: HID 0566:3002 as /class/input/input2
input: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:02.0-4
input: HID 0566:3002 as /class/input/input3
input,hiddev96: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:02.0-4
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
EXT3 FS on sdd6, internal journal
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel на redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdd5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdd9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdd7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdd8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdd10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdc1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.7)
FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
eth0: no link during initialization.
eth1: link up, 10Mbps, half-duplex, lpa 0x0000
audit(1209636807.056:2): audit_pid=2709 old=0 by auid=4294967295
it87: Found IT8716F chip at 0x290, revision 1
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
Linux agpgart interface v0.102 (c) Dave Jones
nvidia: module license 'NVIDIA' taints kernel.
PCI: Setting latency timer of device 0000:02:00.0 to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 169.09 Fri Jan 11 14:38:28
PST 2008
NVRM: failed to register with the ACPI subsystem!
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice
Bellard
KQEMU installed, max_locked_mem=1558324kB.
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size
57947 bytes,<6>...found (800x600, 12886 bytes, v3).
bootsplash: status on console 1 changed to on
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
[user на localhost ~]$ pciscan -v
Recommended driver Description
------------------ -----------
unknown nVidia Corporation MCP61 Memory Controller [RAM
memory]
10de:03ea:1043:8234 drivers: not found
class:005:00:00
slot: 0000:00:00.0 hwid: 1B34AC4C61CC0C3D
unknown nVidia Corporation MCP61 LPC Bridge [ISA bridge]
10de:03e0:1043:8234 drivers: not found
class:006:01:00
slot: 0000:00:01.0 hwid: 968A7A4EB1FE407C
unknown nVidia Corporation MCP61 SMBus [SMBus]
10de:03eb:1043:8234 drivers: not found
class:00c:05:00
slot: 0000:00:01.1 hwid: 10E17C13CAFC22DD
unknown nVidia Corporation MCP61 Memory Controller [RAM
memory]
10de:03f5:1043:8234 drivers: not found
class:005:00:00
slot: 0000:00:01.2 hwid: 3C07C024C89DF494
unknown nVidia Corporation MCP61 USB Controller [OHCI USB
Controller]
10de:03f1:1043:8234 drivers: 2.6|ohci-hcd
2.4|usb-ohci class:00c:03:10
slot: 0000:00:02.0 hwid: C2303FE68C80F586
unknown nVidia Corporation MCP61 USB Controller [EHCI USB
Controller]
10de:03f2:1043:8234 drivers: ehci-hcd
class:00c:03:20
slot: 0000:00:02.1 hwid: 521DAEBA7220C686
unknown nVidia Corporation MCP61 PCI bridge [PCI bridge
Subtractive decode]
10de:03f3 drivers: not found class:006:04:01
slot: 0000:00:04.0 hwid: 4972AA483097F3FC
unknown nVidia Corporation MCP61 High Definition Audio []
10de:03f0:1043:8234 drivers: not found
class:004:03:00
slot: 0000:00:05.0 hwid: FF81BA906EF63FBE
unknown nVidia Corporation MCP61 IDE [IDE interface
storage controller]
10de:03ec:1043:8234 drivers: not found
class:001:01:8a
slot: 0000:00:06.0 hwid: CE50677294A88CA7
unknown nVidia Corporation MCP61 Ethernet [Bridge]
10de:03ef:1043:8234 drivers: not found
class:006:80:00
slot: 0000:00:07.0 hwid: 31E888BF7FE3B1CD
unknown nVidia Corporation MCP61 SATA Controller [IDE
interface storage controller]
10de:03f6:1043:8234 drivers: not found
class:001:01:85
slot: 0000:00:08.0 hwid: F3C3B91BCF7F5DA2
unknown nVidia Corporation MCP61 SATA Controller [IDE
interface storage controller]
10de:03f6:1043:8234 drivers: not found
class:001:01:85
slot: 0000:00:08.1 hwid: F3C3B91BCF7F5DA2
unknown nVidia Corporation MCP61 PCI Express bridge [PCI
bridge Normal decode]
10de:03e8 drivers: not found class:006:04:00
slot: 0000:00:09.0 hwid: CC38E173F71B5203
unknown nVidia Corporation MCP61 PCI Express bridge [PCI
bridge Normal decode]
10de:03e9 drivers: not found class:006:04:00
slot: 0000:00:0b.0 hwid: CC39E073F61A5203
unknown nVidia Corporation MCP61 PCI Express bridge [PCI
bridge Normal decode]
10de:03e9 drivers: not found class:006:04:00
slot: 0000:00:0c.0 hwid: CC39E073F61A5203
unknown Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [Host bridge]
1022:1100 drivers: not found class:006:00:00
slot: 0000:00:18.0 hwid: 4B91EE89C8F7C39C
unknown Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [Host bridge]
1022:1101 drivers: not found class:006:00:00
slot: 0000:00:18.1 hwid: B0D1C43BC126DFF7
unknown Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [Host bridge]
1022:1102 drivers: not found class:006:00:00
slot: 0000:00:18.2 hwid: 5805F5F31667B01B
unknown Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [Host bridge]
1022:1103 drivers: not found class:006:00:00
slot: 0000:00:18.3 hwid: 4AF39C5CB4C81F61
unknown Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [Ethernet controller]
10ec:8139:10ec:8139 drivers: 8139too
class:002:00:00
slot: 0000:01:08.0 hwid: 25C8B729345A752C
unknown Philips Semiconductors SAA7133/SAA7135 Video
Broadcast Decoder [Multimedia controller]
1131:7133:5ace:6090 drivers: saa7134
class:004:80:00
slot: 0000:01:09.0 hwid: 3EFF7C7B5365FAA6
unknown Altera Corporation Unknown device 0791
[Unclassified device]
1172:0791:3931:4c37 drivers: not found
class:000:00:00
slot: 0000:01:0a.0 hwid: A785B6475382F6BC
unknown nVidia Corporation GeForce 7300 GS [VGA
compatible controller]
10de:01df:1043:81f1 drivers: not found
class:003:00:00
slot: 0000:02:00.0 hwid: B36E861D55BD3127
Подробная информация о списке рассылки Desktop