[Desktop] Затык инсталлятора на "populating /dev" :(
Andrei Lomov
=?iso-8859-1?q?lomov_=CE=C1_math=2Ensc=2Eru?=
Вс Окт 21 16:08:49 MSD 2007
Тред уже потерялся,
поцитирую из старых сообщений.
Konstantin A. Lepikhov wrote:
> > Andrei Lomov wrote:
>
> > Есть машина, на которую никак не встает ALD 4:
>
> > Live CD перезагружается на стадии populating /dev
> > Установщик все ставит, проходит тест видеорежима перезагрузился
> > и на той же стадии завис.
> > Отключал разные устройства - добился лишь того, что на
> > populating /dev стал перезагружаться.
> >
> > # lspci -v
> >
> >
> > 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
> > (rev 03)
> > Flags: bus master, medium devsel, latency 0
> > Memory at d0000000 (32-bit, prefetchable) [size=128M]
> > Capabilities: [a0] AGP version 2.0
> > Capabilities: [c0] Power Management version 2
> >
> > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] PCI
> > Bridge (prog-if 00 [Normal decode])
> > Flags: bus master, 66MHz, medium devsel, latency 0
> > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> > I/O behind bridge: 00009000-00009fff
> > Memory behind bridge: e8000000-e9ffffff
> > Prefetchable memory behind bridge: d8000000-e7ffffff
> > Capabilities: [80] Power Management version 2
> >
> > 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
> > (rev 40)
> > Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
> > Flags: bus master, stepping, medium devsel, latency 0
> > Capabilities: [c0] Power Management version 2
> >
> > 00:07.1 IDE interface: VIA Technologies, Inc.
> > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> > (prog-if 8a [Master SecP PriP])
> > Subsystem: VIA Technologies, Inc.
> > VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
> > Flags: bus master, medium devsel, latency 32
> > I/O ports at a000 [size=16]
> > Capabilities: [c0] Power Management version 2
> >
> > 00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> > Controller (rev 1a) (prog-if 00 [UHCI])
> > Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> > Flags: bus master, medium devsel, latency 32, IRQ 7
> > I/O ports at a400 [size=32]
> > Capabilities: [80] Power Management version 2
> >
> > 00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> > Controller (rev 1a) (prog-if 00 [UHCI])
> > Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> > Flags: bus master, medium devsel, latency 32, IRQ 7
> > I/O ports at a800 [size=32]
> > Capabilities: [80] Power Management version 2
> >
> > 00:07.4 Bridge: VIA Techn., Inc. VT82C686 [Apollo Super ACPI] (rev 40)
> > Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> > Flags: medium devsel, IRQ 9
> > Capabilities: [68] Power Management version 2
> >
> > 00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686
> > AC97 Audio Controller (rev 50)
> > Subsystem: VIA Technologies, Inc. Onboard Audio on EP7KXA
> > Flags: medium devsel, IRQ 3
> > I/O ports at ac00 [size=256]
> > I/O ports at b000 [size=4]
> > I/O ports at b400 [size=4]
> > Capabilities: [c0] Power Management version 2
> >
> > 00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> > Controller (rev 61) (prog-if 00 [UHCI])
> > Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> > Flags: bus master, medium devsel, latency 32, IRQ 3
> > I/O ports at b800 [size=32]
> > Capabilities: [80] Power Management version 2
> >
> > 00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> > Controller (rev 61) (prog-if 00 [UHCI])
> > Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> > Flags: bus master, medium devsel, latency 32, IRQ 7
> > I/O ports at bc00 [size=32]
> > Capabilities: [80] Power Management version 2
> >
> > 00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63) (prog-if
> > 20 [EHCI])
> > Subsystem: VIA Technologies, Inc. USB 2.0
> > Flags: bus master, medium devsel, latency 32, IRQ 11
> > Memory at eb001000 (32-bit, non-prefetchable) [size=256]
> > Capabilities: [80] Power Management version 2
> >
> > 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> > RTL-8139/8139C/8139C+ (rev 10)
> > Subsystem: Realtek Semiconductor Co., Ltd. RT8139
> > Flags: bus master, medium devsel, latency 32, IRQ 11
> > I/O ports at c000 [size=256]
> > Memory at eb000000 (32-bit, non-prefetchable) [size=256]
> > [virtual] Expansion ROM at 30000000 [disabled] [size=64K]
> > Capabilities: [50] Power Management version 2
> >
> > 00:11.0 Multimedia video controller: Brooktree Corporation Bt878 Video
> > Capture (rev 11)
> > Subsystem: Avermedia Technologies Inc AverMedia UltraTV PCI 350
> > Flags: bus master, medium devsel, latency 32, IRQ 11
> > Memory at eb002000 (32-bit, prefetchable) [size=4K]
> > Capabilities: [44] Vital Product Data
> > Capabilities: [4c] Power Management version 2
> >
> > 00:11.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
> > (rev 11)
> > Subsystem: Avermedia Technologies Inc UltraTV PCI 350
> > Flags: bus master, medium devsel, latency 32, IRQ 11
> > Memory at eb003000 (32-bit, prefetchable) [size=4K]
> > Capabilities: [44] Vital Product Data
> > Capabilities: [4c] Power Management version 2
> >
> > 00:12.0 Multimedia video controller: Zoran Corporation ZR36057PQC Video
> > cutting chipset (rev 02)
> > Subsystem: Miro Computer Products AG DC10 Plus
> > Flags: bus master, fast devsel, latency 32, IRQ 10
> > Memory at eb004000 (32-bit, non-prefetchable) [size=4K]
> >
> > 00:14.0 Multimedia audio controller:CreativeLabsSBLive! EMU10k1 (rev0a)
> > Subsystem: Creative Labs SBLive! 5.1 eMicro 28028
> > Flags: bus master, medium devsel, latency 32, IRQ 7
> > I/O ports at c400 [size=32]
> > Capabilities: [dc] Power Management version 1
> >
> > 00:14.1 Input device controller: Creative Labs SB Live! Game Port (rev
0a)
> > Subsystem: Creative Labs Gameport Joystick
> > Flags: bus master, medium devsel, latency 32
> > I/O ports at c800 [size=8]
> > Capabilities: [dc] Power Management version 1
> >
> > 01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon
> > 9200] (rev 01) (prog-if 00 [VGA])
> > Subsystem: C.P. Technology Co. Ltd Unknown device 2063
> > Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
> > Memory at d8000000 (32-bit, prefetchable) [size=128M]
> > I/O ports at 9000 [size=256]
> > Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
> > [virtual] Expansion ROM at e8000000 [disabled] [size=128K]
> > Capabilities: [58] AGP version 2.0
> > Capabilities: [50] Power Management version 2
> >
> > 01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200]
> > (Secondary) (rev 01)
> > Subsystem: C.P. Technology Co. Ltd Unknown device 2062
> > Flags: bus master, 66MHz, medium devsel, latency 32
> > Memory at e0000000 (32-bit, prefetchable) [size=128M]
> > Memory at e9010000 (32-bit, non-prefetchable) [size=64K]
> > Capabilities: [50] Power Management version 2
>
> >> Konstantin A. Lepikhov wrote:
> >>
> >>> Hi Andrei!
> >>>
> >>> Sunday 23, at 08:44:03 PM you wrote:
> >>>
> >>> ...
> >>>>> а если поменять видеокарту?
> >>>> ...
> >>>> Мандрива 2007 работает на этой машине, но видеокарта под
> >>>> мандривой без половины функций ...
> >>>>
> >>>> Под ALC 3.0 было лучше, чем под мандривой. Может, драйвера
> >>>> постарее покомпилить? Есть шанс?
> >>> дело не в драйверах, а в железе. Тогда придется проверять
> >>> загрузкой с noapic acpi=off
> >> Хозяин машины пишет, что та же петрушка, просто процесс загрузки до
> >> populating /dev проходит быстрее. А потом перезагрузка
> >
> > Видеокарта ATI Radeon 9200. m/b он заменил, не помогло.
> >
> > Процессор, правда, не очень простой: Duron с разлоченным кэшем ...
> > Может ли быть в этом дело?
>
> сложно сказать, можете ли показать dmesg с мандривы для разбирательства?
>
Linux version 2.6.22.9-desktop-1mdv (lcapitulino на n5.mandriva.com) (gcc
version 4.2.2 20070909 (prerelease) (4.2.2-0.RC.1mdv2008.0)) #1 SMP Thu Sep
27 04:07:04 CEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 131056
HighMem 131056 -> 131056
early_node_map[1] active PFN ranges
0: 0 -> 131056
On node 0 totalpages: 131056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 991 pages used for memmap
Normal zone: 125969 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F7570, 0014 (r0 KT266 )
ACPI: RSDT 1FFF3000, 0028 (r1 KT266 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 1FFF3040, 0074 (r1 KT266 AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 1FFF30C0, 343E (r1 KT266 AWRDACPI 1000 MSFT 100000C)
ACPI: FACS 1FFF0000, 0040
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists. Total pages: 130033
Kernel command line: BOOT_IMAGE=failsafe root=/dev/hdc3 failsafe
splash=silent
bootsplash: silent mode.
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0140c000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1673.840 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514120k/524224k available (2139k kernel code, 8980k reserved, 691k
data, 280k init, 0k highmem, 0k BadRAM)
virtual kernel memory layout:
fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
.init : 0xc03ca000 - 0xc0410000 ( 280 kB)
.data : 0xc0316d67 - 0xc03c3c84 ( 691 kB)
.text : 0xc0100000 - 0xc0316d67 (2139 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3349.49 BogoMIPS
(lpj=1674748)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000
00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000420 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Early unpacking initramfs... done
Freeing initrd memory: 848k freed
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0e08)
CPU0: AMD Athlon(tm) stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb470, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
ACPI: RTC can wake from S4
pnp: 00:00: iomem range 0xcd000-0xcffff has been reserved
pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: e4000000-e5ffffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1192919292.253:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
Boot video device is 0000:01:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
TCP cubic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 280k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 10
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Switched to high resolution mode on CPU 0
input: GenPS/2 Genius Mouse as /class/input/input1
hda: ST3160812A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ST380021A, ATA DISK drive
hdd: BENQ DVD DD DW1620, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63,
UDMA(100)
hda: cache flushes supported
hda: hda1
hdc: max request size: 128KiB
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(100)
hdc: cache flushes not supported
hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 > hdc3
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt 0000:00:0c.1[A] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
bt87x0: Using board 4, analog, digital (rate 48000 Hz)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) ->
IRQ 11
uhci_hcd 0000:00:09.0: UHCI Host Controller
uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:09.0: irq 11, io base 0x0000a400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Linux agpgart interface v0.102 (c) Dave Jones
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:09.1[B] -> Link [LNKC] -> GSI 11 (level, low) ->
IRQ 11
uhci_hcd 0000:00:09.1: UHCI Host Controller
uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:09.1: irq 11, io base 0x0000a800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 3 (level, low) ->
IRQ 3
uhci_hcd 0000:00:11.2: UHCI Host Controller
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:11.2: irq 3, io base 0x0000bc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Linux video capture interface: v2.00
ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 3 (level, low) ->
IRQ 3
uhci_hcd 0000:00:11.3: UHCI Host Controller
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:11.3: irq 3, io base 0x0000c000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
Linux video codec intermediate layer: v0.2
usb 1-1: configuration #1 chosen from 1 choice
agpgart: Detected VIA KT266/KY266x/KT333 chipset
Zoran MJPEG board driver version 0.9.5
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 11 (level, low) ->
IRQ 11
MJPEG[0]: Zoran ZR36067 (rev 2) irq: 11, memory: 0xe7003000
MJPEG[0]: subsystem vendor=0x1031 id=0x7efe
agpgart: AGP aperture is 64M @ 0xe0000000
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
eth0: RealTek RTL8139 at 0xe09a4000, 00:50:22:e1:b6:0f, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt 0000:00:09.2[C] -> Link [LNKD] -> GSI 3 (level, low) ->
IRQ 3
ehci_hcd 0000:00:09.2: EHCI Host Controller
ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:09.2: irq 3, io mem 0xe7001000
ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:09.3[A] -> Link [LNKB] -> GSI 11 (level, low) ->
IRQ 11
gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xb400, speed 1169kHz
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
i2c-adapter i2c-0: Transaction error!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[e7002000-e70027ff]
Max Packet=[2048] IR/IT contexts=[4/8]
usb 3-1: new full speed USB device using uhci_hcd and address 2
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
usb 3-1: not running at top speed; connect to a high speed hub
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 10 (level, low) ->
IRQ 10
bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 10, latency: 32, mmio:
0xe7004000
bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is
1461:0003
bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f6fff3 [init]
bttv0: Avermedia eeprom[0x4821]: tuner=5 radio:yes remote control:yes
bttv0: using tuner=5
usb 3-1: configuration #1 chosen from 1 choice
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... <6>usb 3-2: new full speed USB
device using uhci_hcd and address 3
not found
usb 3-2: configuration #1 chosen from 1 choice
usb 1-1: USB disconnect, address 2
bttv0: i2c: checking for TDA9887 @ 0x86... not found
ZORAN: 1 card(s) found
DC10plus[0]: zr36057_init() - initializing card[0], zr=e0a1e260
tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
usb 4-2: new full speed USB device using uhci_hcd and address 2
bttv0: registered device video1
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
input: bttv IR (card=41) as /class/input/input2
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 3 (level, low) ->
IRQ 3
usb 4-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) ->
IRQ 11
PCI: Setting latency timer of device 0000:00:11.5 to 64
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000a4800000001a7]
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 1-1: new full speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
rtusb init ====>
idVendor = 0x7d1, idProduct = 0x3c03
rt73: Failed to request_firmware. Check your firmware file location
rt73: probe of 3-1:1.0 failed with error -2
usbcore: registered new interface driver rt73
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
pl2303 1-1:1.0: pl2303 converter detected
usb 1-1: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt
0 proto 2 vid 0x04E8 pid 0x300C
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
BUG: unable to handle kernel paging request at virtual address 2f3d4854
printing eip:
c02aaf86
*pde = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: usblp pl2303 usbserial rt73 snd_usb_lib tuner zr36060
tvaudio adv7175 8139cp saa7110 snd_via82xx snd_emu10k1 bttv snd_mpu401_uart
video_buf zr36067 ir_common compat_ioctl32 i2c_algo_bit btcx_risc
videocodec tveeprom videodev ohci1394 ide_cd emu10k1_gp ehci_hcd
snd_rawmidi 8139too v4l2_common ieee1394 gameport via_agp agpgart uhci_hcd
v4l1_compat shpchp mii usbcore snd_ac97_codec pci_hotplug ac97_bus
snd_seq_device snd_util_mem snd_hwdep i2c_viapro snd_bt87x i2c_core snd_pcm
snd_timer snd soundcore snd_page_alloc tsdev evdev ext3 jbd ide_disk
via82cxxx ide_core
CPU: 0
EIP: 0060:[<c02aaf86>] Not tainted VLI
EFLAGS: 00010202 (2.6.22.9-desktop-1mdv #1)
EIP is at __dev_get_by_name+0x76/0xc0
eax: ffffffff ebx: 00000005 ecx: 0000000f edx: 2f3d4854
esi: df3f2001 edi: de5b3ef9 ebp: de5b3ea8 esp: de5b3e8c
ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
Process ethtool (pid: 2319, ti=de5b2000 task=df218aa0 task.ti=de5b2000)
Stack: de5b3ef8 df3f2000 c0161bf3 0000013e de5b3ef8 00000001 de5b3ef8
de5b3ebc
c02ad38a 00008946 fffffff2 00008946 de5b3f2c c02adf86 bff53be4
00000000
00000000 00000002 c13ef26c df68eb7c de5b3f5c de5b3f5c c01702ce
df822518
Call Trace:
[<c010529a>] show_trace_log_lvl+0x1a/0x30
[<c010535b>] show_stack_log_lvl+0xab/0xd0
[<c0105551>] show_registers+0x1d1/0x2d0
[<c0105768>] die+0x118/0x240
[<c0121399>] do_page_fault+0x199/0x630
[<c0315fba>] error_code+0x72/0x78
[<c02ad38a>] dev_load+0x1a/0x50
[<c02adf86>] dev_ioctl+0x236/0x330
[<c02a10a9>] sock_ioctl+0xb9/0x200
[<c018fae8>] do_ioctl+0x28/0xb0
[<c018fd8f>] vfs_ioctl+0x21f/0x2a0
[<c018fe69>] sys_ioctl+0x59/0x70
[<c01041ba>] sysenter_past_esp+0x6b/0xa1
=======================
Code: cb 8d 04 92 8d 04 42 89 c6 75 de 25 ff 00 00 00 8d 04 85 80 06 47 c0
8b 10 85 d2 75 0e eb 44 8d b6 00 00 00 00 8b 12 85 d2 74 38 <8b> 02 0f 18
00 90 8d 42 f0 b9 10 00 00 00 8b 7d e4 89 45 e8 89
EIP: [<c02aaf86>] __dev_get_by_name+0x76/0xc0 SS:ESP 0068:de5b3e8c
ACPI: CPU0 (power states: C1[C1] C2[C2])
Marking TSC unstable due to: possible TSC halt in C2.
Time: acpi_pm clocksource has been installed.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
BUG: unable to handle kernel paging request at virtual address 4d554e51
printing eip:
c02f24fd
*pde = 00000000
Oops: 0000 [#2]
SMP
Modules linked in: floppy cpufreq_ondemand cpufreq_conservative
cpufreq_powersave freq_table processor usblp pl2303 usbserial rt73
snd_usb_lib tuner zr36060 tvaudio adv7175 8139cp saa7110 snd_via82xx
snd_emu10k1 bttv snd_mpu401_uart video_buf zr36067 ir_common compat_ioctl32
i2c_algo_bit btcx_risc videocodec tveeprom videodev ohci1394 ide_cd
emu10k1_gp ehci_hcd snd_rawmidi 8139too v4l2_common ieee1394 gameport
via_agp agpgart uhci_hcd v4l1_compat shpchp mii usbcore snd_ac97_codec
pci_hotplug ac97_bus snd_seq_device snd_util_mem snd_hwdep i2c_viapro
snd_bt87x i2c_core snd_pcm snd_timer snd soundcore snd_page_alloc tsdev
evdev ext3 jbd ide_disk via82cxxx ide_core
CPU: 0
EIP: 0060:[<c02f24fd>] Not tainted VLI
EFLAGS: 00010286 (2.6.22.9-desktop-1mdv #1)
EIP is at devinet_copy_dflt_conf+0x5d/0x80
eax: 4d554e51 ebx: 4d554e21 ecx: 4d554e51 edx: de474c60
esi: 00000007 edi: 00000000 ebp: deed9f1c esp: deed9f14
ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
Process sysctl (pid: 2451, ti=deed8000 task=def9b550 task.ti=deed8000)
Stack: 00000001 dff548e0 deed9f3c c02f2587 b7f25000 deed9f58 deed9f9c
ffffffff
dff548e0 dfd702a0 deed9f6c c01c1171 b7f25000 deed9f58 deed9f9c
00000002
b7f25000 00000002 dff62cc0 dfd702a0 b7f25000 00000002 deed9f90
c0183eb5
Call Trace:
[<c010529a>] show_trace_log_lvl+0x1a/0x30
[<c010535b>] show_stack_log_lvl+0xab/0xd0
[<c0105551>] show_registers+0x1d1/0x2d0
[<c0105768>] die+0x118/0x240
[<c0121399>] do_page_fault+0x199/0x630
[<c0315fba>] error_code+0x72/0x78
[<c02f2587>] devinet_conf_proc+0x67/0x70
[<c01c1171>] proc_sys_write+0x91/0xa0
[<c0183eb5>] vfs_write+0xb5/0x140
[<c018451d>] sys_write+0x3d/0x70
[<c01041ba>] sysenter_past_esp+0x6b/0xa1
=======================
Code: 08 01 00 00 85 d2 74 1e 0f a3 b2 ec 00 00 00 19 c0 85 c0 75 11 8b 04
b5 84 3f 3b c0 89 84 b2 98 00 00 00 8b 4b 30 8d 59 d0 89 c8 <8b> 4b 30 0f
18 01 90 3d cc 08 3b c0 75 c5 90 ff 05 d4 08 3b c0
EIP: [<c02f24fd>] devinet_copy_dflt_conf+0x5d/0x80 SS:ESP 0068:deed9f14
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel на redhat.com
EXT3 FS on hdc3, internal journal
Adding 939760k swap on /dev/hdc6. Priority:-1 extents:1 across:939760k
NTFS driver 2.1.28 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem
will be case sensitive!
loop: module loaded
--
Всего доброго,
А.Л.
Подробная информация о списке рассылки Desktop