[Comm] lm-sensors3, p6, 39-std-def-alt2.1

[Speccyfighter]

10.07.2011 17:03, Pavel N. Solovyov пишет:
> On Sun, 10 Jul 2011 17:42:01 +0400
> Mikhail Kolchin wrote:
>
>> Помогло:
>> $ modprobe i2c-dev
> 	Так только частично, напряжений и оборотов кулеров нет...
> Или это от материнской платы зависит?
>
Угу:
http://www.lm-sensors.org/wiki/Devices
http://www.lm-sensors.org/wiki/Configurations
от функционала (например):
http://lists.lm-sensors.org/pipermail/lm-sensors/2006-December/018519.html
и бажности ядра:
http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31

Не знаю, как там оно closed, но на 2.6.35 воспроизводится:

# sensors-detect
# sensors-detect revision 5729 (2009-06-02 15:51:29 +0200)
# System: System manufacturer System Product Name
# Board: ASUSTeK Computer INC. P5B-E
...
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Intel Core family thermal sensor...                         Success!
     (driver `coretemp')
...
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Found `Winbond W83627DHG Super IO Sensors'                  Success!
     (address 0x290, driver `w83627ehf')
...
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801' for device 0000:00:1f.3: Intel 82801H ICH8
Module i2c-dev loaded successfully.
...
Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `w83627ehf':
   * ISA bus, address 0x290
     Chip `Winbond W83627DHG Super IO Sensors' (confidence: 9)

Driver `coretemp':
   * Chip `Intel Core family thermal sensor' (confidence: 9)

...
Loading sensor modules: coretemp 
w83627ehf                                      [FAILED]
Unloading i2c-dev... OK
#


# modprobe w83627ehf
FATAL: Error inserting w83627ehf 
(/lib/modules/2.6.35-un-def-alt8/kernel/drivers/hwmon/w83627ehf.ko): 
Device or resource busy


Но если что-то есть,

# lsmod | grep 'hwmon'
hwmon_vid               2334  0
hwmon                   1520  2 coretemp,asus_atk0110

# lsmod | grep i2c
i2c_i801                8129  0
i2c_core               20936  2 nvidia,i2c_i801


то что-то уже и показывает:

# sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.19 V  (min =  +0.85 V, max =  +1.60 V)
  +3.3 Voltage:      +3.20 V  (min =  +2.97 V, max =  +3.63 V)
  +5 Voltage:        +5.02 V  (min =  +4.50 V, max =  +5.50 V)
  +12 Voltage:      +12.36 V  (min = +10.20 V, max = +13.80 V)
CPU FAN Speed:     1906 RPM  (min =  600 RPM)
CHASSIS1 FAN Speed:1534 RPM  (min =  800 RPM)
CHASSIS2 FAN Speed:   0 RPM  (min =  800 RPM)
POWER FAN Speed:      0 RPM  (min =  800 RPM)
CPU Temperature:    +47.5°C  (high = +60.0°C, crit = +95.0°C)
MB Temperature:     +50.0°C  (high = +45.0°C, crit = +95.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +54.0°C  (high = +86.0°C, crit = +100.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +54.0°C  (high = +86.0°C, crit = +100.0°C)

Жарко у меня...