[Comm] Долго определяется оборудование компа
erik predibailo
epredibailo на gmail.com
Пт Мар 12 06:38:11 UTC 2010
>Покажите ещё для сравнения dmesg с системы, загружающейся без таких
проблем.
Вот специально установил то, что было под рукой, тоже неофициальная
сборка минимал , ядро 2.6.30-std-def-alt14
Эта сборка, как впрочем и что говорил раннее грузится быстро. Вот dmesg
# cat /var/log/dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-std-def-alt14
(builder на apiary.orion.altlinux.org) (gcc version 4.3.2 20081105 (ALT
Linux 4.3.2-alt13) (GCC) ) #1 SMP Wed Oct 7 06:44:21 UTC 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffef800 (usable)
[ 0.000000] BIOS-e820: 000000003ffef800 - 000000003fff0000 (reserved)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM,
working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3ffef max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003ffef800 (usable)
[ 0.000000] modified: 000000003ffef800 - 000000003fff0000 (reserved)
[ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 00e57000 - 00effe21
[ 0.000000] ACPI: RSDP 000f78d0 00014 (v00 IntelR)
[ 0.000000] ACPI: RSDT 3fff3040 00034 (v01 IntelR AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: FACP 3fff30c0 00074 (v01 IntelR AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: DSDT 3fff3180 04294 (v01 INTELR AWRDACPI 00001000
MSFT 0100000E)
[ 0.000000] ACPI: FACS 3fff0000 00040
[ 0.000000] ACPI: _HPT 3fff7580 00038 (v01 IntelR AWRDACPI 42302E31
AWRD 00000098)
[ 0.000000] ACPI: MCFG 3fff7600 0003C (v01 IntelR AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: APIC 3fff7480 00084 (v01 IntelR AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000200000 - 0000744168] TEXT DATA BSS ==>
[0000200000 - 0000744168]
[ 0.000000] #4 [0000e57000 - 0000effe21] RAMDISK ==>
[0000e57000 - 0000effe21]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==>
[000009f800 - 0000100000]
[ 0.000000] #6 [0000745000 - 00007480ba] BRK ==>
[0000745000 - 00007480ba]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==>
[0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==>
[0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f3760] f3760
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003ffef
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ffef
[ 0.000000] On node 0 totalpages: 262014
[ 0.000000] free_area_init_node: node 0, pgdat c0621fe0,
node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34529 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages at c1805000, static data 21820 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 259966
[ 0.000000] Kernel command line: auto BOOT_IMAGE=ALTLinux ro
root=UUID=79c916f6-81f7-4b31-98bb-5324934c8d8a
resume=/dev/disk/by-uuid/490527c9-b968-4146-b040-e6cb0a18f06b panic=30
splash=silent
[ 0.000000] bootsplash: silent mode.
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3066.630 MHz processor.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] ram_console: buffer (null), invalid size 0, datasize 4294967284
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 5242220 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Initializing HighMem for node 0 (000377fe:0003ffef)
[ 0.004000] Memory: 1027332k/1048508k available (2862k kernel code,
20416k reserved, 1415k data, 460k init, 139204k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.004000] .init : 0xc0635000 - 0xc06a8000 ( 460 kB)
[ 0.004000] .data : 0xc04cb88d - 0xc062d828 (1415 kB)
[ 0.004000] .text : 0xc0200000 - 0xc04cb88d (2862 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004012] Calibrating delay loop (skipped), value calculated
using timer frequency.. 6133.26 BogoMIPS (lpj=12266520)
[ 0.004072] Security Framework initialized
[ 0.004081] SELinux: Disabled at boot.
[ 0.004102] Mount-cache hash table entries: 512
[ 0.004264] Initializing cgroup subsys ns
[ 0.004271] Initializing cgroup subsys cpuacct
[ 0.004278] Initializing cgroup subsys memory
[ 0.004286] Initializing cgroup subsys devices
[ 0.004291] Initializing cgroup subsys freezer
[ 0.004295] Initializing cgroup subsys net_cls
[ 0.004327] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004333] CPU: L2 cache: 512K
[ 0.004337] CPU: Hyper-Threading is disabled
[ 0.004343] Intel machine check architecture supported.
[ 0.004352] Intel machine check reporting enabled on CPU#0.
[ 0.004358] CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
[ 0.004364] CPU0: Thermal monitoring enabled
[ 0.004370] using mwait in idle threads.
[ 0.004386] Checking 'hlt' instruction... OK.
[ 0.020706] SMP alternatives: switching to UP code
[ 0.027870] ACPI: Core revision 20090320
[ 0.040384] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081827] CPU0: Intel(R) Celeron(R) D CPU 3.06GHz stepping 05
[ 0.084001] Brought up 1 CPUs
[ 0.084001] Total of 1 processors activated (6133.26 BogoMIPS).
[ 0.084001] CPU0 attaching NULL sched-domain.
[ 0.084001] net_namespace: 1088 bytes
[ 0.084001] regulator: core version 0.5
[ 0.084001] NET: Registered protocol family 16
[ 0.084001] EISA bus registered
[ 0.084001] ACPI: bus type pci registered
[ 0.084001] PCI: Found Intel Corporation 945G/GZ/P/PL Express
Memory Controller Hub with MMCONFIG support.
[ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.084001] PCI: MCFG area at e0000000 reserved in E820
[ 0.084001] PCI: Using MMCONFIG for extended config space
[ 0.084001] PCI: Using configuration type 1 for base access
[ 0.084001] bio: create slab <bio-0> at 0
[ 0.084442] ACPI: EC: Look up EC in DSDT
[ 0.091257] ACPI: Interpreter enabled
[ 0.091268] ACPI: (supports S0 S1 S4 S5)
[ 0.091302] ACPI: Using IOAPIC for interrupt routing
[ 0.098808] ACPI: No dock devices found.
[ 0.098838] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.099034] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
[ 0.099086] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.099094] pci 0000:00:1b.0: PME# disabled
[ 0.099167] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.099174] pci 0000:00:1c.0: PME# disabled
[ 0.099238] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f]
[ 0.099296] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f]
[ 0.099356] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f]
[ 0.099414] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f]
[ 0.099471] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
[ 0.099525] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.099533] pci 0000:00:1d.7: PME# disabled
[ 0.099675] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.099682] pci 0000:00:1f.0: quirk: region 0400-047f claimed by
ICH6 ACPI/GPIO/TCO
[ 0.099690] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.099697] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0800 (mask 003f)
[ 0.099704] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at
0290 (mask 0007)
[ 0.099756] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.099764] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.099771] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.099779] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.099786] pci 0000:00:1f.1: reg 20 io port: [0xfb00-0xfb0f]
[ 0.099837] pci 0000:00:1f.2: reg 10 io port: [0xfa00-0xfa07]
[ 0.099845] pci 0000:00:1f.2: reg 14 io port: [0xf900-0xf903]
[ 0.099852] pci 0000:00:1f.2: reg 18 io port: [0xf800-0xf807]
[ 0.099859] pci 0000:00:1f.2: reg 1c io port: [0xf700-0xf703]
[ 0.099866] pci 0000:00:1f.2: reg 20 io port: [0xf600-0xf60f]
[ 0.099874] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffe000-0xfdffe3ff]
[ 0.099898] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.099905] pci 0000:00:1f.2: PME# disabled
[ 0.099958] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.100099] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.100114] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.100128] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
[ 0.100142] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.100201] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe
device. You can enable it with 'pcie_aspm=force'
[ 0.100288] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[ 0.100293] pci 0000:00:1c.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
[ 0.100301] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.100350] pci 0000:02:05.0: reg 10 io port: [0xee00-0xeeff]
[ 0.100358] pci 0000:02:05.0: reg 14 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.100389] pci 0000:02:05.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.100411] pci 0000:02:05.0: supports D1 D2
[ 0.100414] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.100421] pci 0000:02:05.0: PME# disabled
[ 0.100467] pci 0000:00:1e.0: transparent bridge
[ 0.100473] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.100478] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.100485] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
[ 0.100499] pci_bus 0000:00: on NUMA node 0
[ 0.100510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.100702] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.100786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.112202] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.112354] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
[ 0.112501] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.112646] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
[ 0.112791] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.112937] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
[ 0.113083] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11
12 14 15) *0, disabled.
[ 0.113230] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[ 0.113757] PCI: Using ACPI for IRQ routing
[ 0.114001] NetLabel: Initializing
[ 0.114007] NetLabel: domain hash size = 128
[ 0.114010] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.114027] NetLabel: unlabeled traffic allowed by default
[ 0.114120] hpet clockevent registered
[ 0.114123] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.114133] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.114141] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.120179] pnp: PnP ACPI init
[ 0.120197] ACPI: bus type pnp registered
[ 0.124541] pnp: PnP ACPI: found 14 devices
[ 0.124549] ACPI: ACPI bus type pnp unregistered
[ 0.124557] PnPBIOS: Disabled by ACPI PNP
[ 0.124573] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.124579] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.124584] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.124590] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.124603] system 00:0a: ioport range 0x400-0x4bf could not be reserved
[ 0.124612] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.124622] system 00:0d: iomem range 0xcf000-0xcffff has been reserved
[ 0.124627] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.124633] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.124638] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.124644] system 00:0d: iomem range 0xfed00000-0xfed000ff has been reserved
[ 0.124649] system 00:0d: iomem range 0x3fff0000-0x3fffffff could
not be reserved
[ 0.124656] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.124661] system 00:0d: iomem range 0x100000-0x3ffeffff could not
be reserved
[ 0.124668] system 00:0d: iomem range 0xfec00000-0xfec00fff could
not be reserved
[ 0.124674] system 00:0d: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.124679] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.124685] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.124691] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.124696] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.124703] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[ 0.159707] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.159716] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
[ 0.159725] pci 0000:00:1c.0: MEM window: 0xfa000000-0xfcffffff
[ 0.159732] pci 0000:00:1c.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.159744] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.159749] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.159757] pci 0000:00:1e.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.159764] pci 0000:00:1e.0: PREFETCH window:
0x000000fde00000-0x000000fdefffff
[ 0.159786] alloc irq_desc for 16 on cpu 0 node 0
[ 0.159788] alloc kstat_irqs on cpu 0 node 0
[ 0.159796] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.159805] pci 0000:00:1c.0: setting latency timer to 64
[ 0.159813] pci 0000:00:1e.0: setting latency timer to 64
[ 0.159819] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.159822] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.159826] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.159829] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff]
[ 0.159831] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.159835] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.159837] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.159840] pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff]
[ 0.159843] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.159846] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.159916] NET: Registered protocol family 2
[ 0.160056] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.160447] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.161005] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.161332] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.161343] TCP reno registered
[ 0.161524] NET: Registered protocol family 1
[ 0.161611] Trying to unpack rootfs image as initramfs...
[ 0.185240] Freeing initrd memory: 675k freed
[ 0.186184] Scanning for low memory corruption every 60 seconds
[ 0.186515] audit: initializing netlink socket (disabled)
[ 0.186535] type=2000 audit(1268396570.184:1): initialized
[ 0.192745] highmem bounce pool size: 64 pages
[ 0.192758] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.192834] VFS: Disk quotas dquot_6.5.2
[ 0.192870] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.192931] msgmni has been set to 1736
[ 0.193142] alg: No test for stdrng (krng)
[ 0.193236] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 254)
[ 0.193245] io scheduler noop registered
[ 0.193249] io scheduler anticipatory registered
[ 0.193265] io scheduler cfq registered (default)
[ 0.193384] pci 0000:01:00.0: Boot video device
[ 0.193550] alloc irq_desc for 24 on cpu 0 node 0
[ 0.193553] alloc kstat_irqs on cpu 0 node 0
[ 0.193565] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.193581] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.194079] vesafb: framebuffer at 0xd0000000, mapped to
0xf8080000, using 3750k, total 262144k
[ 0.194088] vesafb: mode is 800x600x16, linelength=1600, pages=2
[ 0.194093] vesafb: protected mode interface info at c000:d5a0
[ 0.194098] vesafb: pmi: set display start = c00cd5d6, set palette = c00cd640
[ 0.194102] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6
3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 0.194127] vesafb: scrolling: redraw
[ 0.194132] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.194278] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.201305] bootsplash: silentjpeg size 42848 bytes
[ 0.212406] bootsplash: ...found (800x600, 3864 bytes, v3).
[ 0.260963] Console: switching to colour frame buffer device 97x34
[ 0.339454] fb0: VESA VGA frame buffer device
[ 0.340076] isapnp: Scanning for PnP cards...
[ 0.616037] Switched to high resolution mode on CPU 0
[ 0.648845] isapnp: No Plug & Play device found
[ 0.708414] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.709172] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.710976] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.713884] brd: module loaded
[ 0.714262] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 0.715105] Fixed MDIO Bus: probed
[ 0.729612] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.744266] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.774012] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.789319] mice: PS/2 mouse device common for all mice
[ 0.804306] EISA: Probing bus 0 at eisa.0
[ 0.819155] cpuidle: using governor ladder
[ 0.833727] cpuidle: using governor menu
[ 0.848503] TCP bic registered
[ 0.862600] Using IPI No-Shortcut mode
[ 0.883748] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 0.898757] registered taskstats version 1
[ 0.913627] Freeing unused kernel memory: 460k freed
[ 0.928486] Write protecting the kernel text: 2864k
[ 0.942884] Write protecting the kernel read-only data: 1220k
[ 0.957207] Executing init=/init
[ 2.073474] Uniform Multi-Platform E-IDE driver
[ 2.099236] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01)
[ 2.113018] alloc irq_desc for 18 on cpu 0 node 0
[ 2.113022] alloc kstat_irqs on cpu 0 node 0
[ 2.113031] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.127062] piix 0000:00:1f.1: IDE port disabled
[ 2.140892] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 2.154795] ide0: BM-DMA at 0xfb00-0xfb07
[ 2.168635] Probing IDE interface ide0...
[ 2.904225] hda: HL-DT-STDVD-RAM GH22NP20, ATAPI CD/DVD-ROM drive
[ 3.252071] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.252239] hda: UDMA/66 mode selected
[ 3.266349] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.313455] ide_generic: please use "probe_mask=0x3f" module
parameter for probing all legacy ISA IDE ports
[ 3.355860] ide-gd driver 1.18
[ 3.396843] SCSI subsystem initialized
[ 3.436699] Driver 'sd' needs updating - please use bus_type methods
[ 3.481654] libata version 3.00 loaded.
[ 3.494476] ata_piix 0000:00:1f.2: version 2.13
[ 3.494498] alloc irq_desc for 19 on cpu 0 node 0
[ 3.494501] alloc kstat_irqs on cpu 0 node 0
[ 3.494509] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.508429] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.521958] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.522747] scsi0 : ata_piix
[ 3.537525] scsi1 : ata_piix
[ 3.552860] ata1: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19
[ 3.566268] ata2: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19
[ 3.748233] ata1.01: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[ 3.776253] ata1.01: configured for UDMA/100
[ 3.798121] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM
GH22NS50 TN01 PQ: 0 ANSI: 5
[ 4.023973] ata2.00: HPA detected: current 312579695, native 312581808
[ 4.037937] ata2.00: ATA-7: MAXTOR STM3160215AS, 3.AAD, max UDMA/133
[ 4.051624] ata2.00: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.107287] ata2.00: configured for UDMA/133
[ 4.121054] scsi 1:0:0:0: Direct-Access ATA MAXTOR
STM316021 3.AA PQ: 0 ANSI: 5
[ 4.135727] sd 1:0:0:0: [sda] 312579695 512-byte hardware sectors:
(160 GB/149 GiB)
[ 4.150237] sd 1:0:0:0: [sda] Write Protect is off
[ 4.164580] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.164642] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.204117] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 4.297571] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.102858] PM: Starting manual resume from disk
[ 6.201937] kjournald starting. Commit interval 5 seconds
[ 6.217190] EXT3-fs: mounted filesystem with writeback data mode.
[ 8.411093] scsi 0:0:1:0: Attached scsi generic sg0 type 5
[ 8.411154] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 8.452772] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 8.452911] ACPI: Power Button [PWRF]
[ 8.452978] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.453032] ACPI: Power Button [PWRB]
[ 8.453092] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 8.453146] ACPI: Sleep Button [SLPB]
[ 8.457999] processor ACPI_CPU:00: registered as cooling_device0
[ 8.469602] Driver 'sr' needs updating - please use bus_type methods
[ 8.491111] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 8.491118] Uniform CD-ROM driver Revision: 3.20
[ 8.491239] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 8.525121] thermal LNXTHERM:01: registered as thermal_zone0
[ 8.525132] ACPI: Thermal Zone [THRM] (40 C)
[ 8.532871] Linux agpgart interface v0.103
[ 8.537403] ide-cd driver 5.00
[ 8.540432] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.565498] ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive,
2048kB Cache
[ 8.654323] usbcore: registered new interface driver usbfs
[ 8.654363] usbcore: registered new interface driver hub
[ 8.654416] usbcore: registered new device driver usb
[ 8.695186] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.695228] alloc irq_desc for 23 on cpu 0 node 0
[ 8.695232] alloc kstat_irqs on cpu 0 node 0
[ 8.695240] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.695264] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 8.695268] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 8.695326] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 8.699226] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 8.699246] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 8.712049] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 8.712099] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.712103] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.712106] usb usb1: Product: EHCI Host Controller
[ 8.712109] usb usb1: Manufacturer: Linux 2.6.30-std-def-alt14 ehci_hcd
[ 8.712111] usb usb1: SerialNumber: 0000:00:1d.7
[ 8.712293] usb usb1: configuration #1 chosen from 1 choice
[ 8.712334] hub 1-0:1.0: USB hub found
[ 8.712347] hub 1-0:1.0: 8 ports detected
[ 8.763728] FDC 0 is a post-1991 82077
[ 8.798759] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.798816] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.798828] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.798833] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.798873] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 8.798904] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 8.798951] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.798955] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.798958] usb usb2: Product: UHCI Host Controller
[ 8.798960] usb usb2: Manufacturer: Linux 2.6.30-std-def-alt14 uhci_hcd
[ 8.798963] usb usb2: SerialNumber: 0000:00:1d.0
[ 8.799123] usb usb2: configuration #1 chosen from 1 choice
[ 8.799162] hub 2-0:1.0: USB hub found
[ 8.799174] hub 2-0:1.0: 2 ports detected
[ 8.799353] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.799363] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 8.799367] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.799395] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 8.799423] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 8.799461] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.799465] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.799467] usb usb3: Product: UHCI Host Controller
[ 8.799470] usb usb3: Manufacturer: Linux 2.6.30-std-def-alt14 uhci_hcd
[ 8.799472] usb usb3: SerialNumber: 0000:00:1d.1
[ 8.799570] usb usb3: configuration #1 chosen from 1 choice
[ 8.799605] hub 3-0:1.0: USB hub found
[ 8.799614] hub 3-0:1.0: 2 ports detected
[ 8.799788] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.799797] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8.799800] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.799830] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 8.799868] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 8.799906] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.799910] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.799913] usb usb4: Product: UHCI Host Controller
[ 8.799915] usb usb4: Manufacturer: Linux 2.6.30-std-def-alt14 uhci_hcd
[ 8.799917] usb usb4: SerialNumber: 0000:00:1d.2
[ 8.800077] usb usb4: configuration #1 chosen from 1 choice
[ 8.800113] hub 4-0:1.0: USB hub found
[ 8.800123] hub 4-0:1.0: 2 ports detected
[ 8.800327] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 8.800337] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 8.800341] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 8.800367] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 8.800409] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 8.800450] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.800454] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.800456] usb usb5: Product: UHCI Host Controller
[ 8.800458] usb usb5: Manufacturer: Linux 2.6.30-std-def-alt14 uhci_hcd
[ 8.800461] usb usb5: SerialNumber: 0000:00:1d.3
[ 8.800555] usb usb5: configuration #1 chosen from 1 choice
[ 8.800592] hub 5-0:1.0: USB hub found
[ 8.800602] hub 5-0:1.0: 2 ports detected
[ 8.883683] epl: module is from the staging directory, the quality
is unknown, you have been warned.
[ 8.885992] EPL: + EplLinInit...
[ 8.885996] EPL: Driver build: Oct 7 2009 / 07:24:47
[ 8.885999] EPL: Installing Driver 'systec_epl', Version V1.3 r0...
[ 8.886003] EPL: Driver 'systec_epl' installed successful,
assigned MajorNumber=252
[ 8.886015] EPL: - EplLinInit (iRet=0)
[ 8.917943] 8139too Fast Ethernet driver 0.9.28
[ 8.917988] alloc irq_desc for 20 on cpu 0 node 0
[ 8.917991] alloc kstat_irqs on cpu 0 node 0
[ 8.917999] 8139too 0000:02:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 8.918652] eth0: RealTek RTL8139 at 0xf8978000, 00:e0:4d:1c:01:e9, IRQ 20
[ 8.918655] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 8.925731] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 8.964945] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level,
low) -> IRQ 19
[ 8.978758] IT8712 SuperIO detected.
[ 8.978924] parport_pc 00:08: reported by Plug and Play ACPI
[ 8.978971] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.076660] rtc_cmos 00:03: RTC can wake from S4
[ 9.076832] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 9.076868] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 9.240067] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 9.421494] usb 3-2: New USB device found, idVendor=09da, idProduct=000a
[ 9.421500] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.421504] usb 3-2: Product: PS/2+USB Mouse
[ 9.421506] usb 3-2: Manufacturer: A4Tech
[ 9.421702] usb 3-2: configuration #1 chosen from 1 choice
[ 9.487730] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 9.487769] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.612123] ppdev: user-space parallel port driver
[ 9.644853] usbcore: registered new interface driver hiddev
[ 9.644919] usbcore: registered new interface driver usbhid
[ 9.644923] usbhid: v2.6:USB HID core driver
[ 9.664992] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 9.689807] input: A4Tech PS/2+USB Mouse as
/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7
[ 9.690062] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID
v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.1-2/input0
[ 39.895911] Adding 1052216k swap on /dev/sda1. Priority:-1
extents:1 across:1052216k
[ 40.235322] EXT3 FS on sda2, internal journal
[ 43.111053] device-mapper: uevent: version 1.0.3
[ 43.112601] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised: dm-devel на redhat.com
[ 44.182801] kjournald starting. Commit interval 5 seconds
[ 44.182934] EXT3 FS on sda6, internal journal
[ 44.182940] EXT3-fs: mounted filesystem with writeback data mode.
[ 44.203985] kjournald starting. Commit interval 5 seconds
[ 44.204127] EXT3 FS on sda7, internal journal
[ 44.204132] EXT3-fs: mounted filesystem with writeback data mode.
[ 44.277819] fuse init (API version 7.12)
12.03.10, erik predibailo<epredibailo на gmail.com> написал(а):
>>Покажите ещё для сравнения dmesg с системы, загружающейся без таких
> проблем.
> ОК!!!
>
> 12.03.10, Sergey Vlasov<vsu на altlinux.ru> написал(а):
>> On Thu, Mar 11, 2010 at 05:12:30PM +0100, vx 8400 wrote:
>>> 11 марта 2010 г. 17:04 erik predibailo:
>>> > Вопрос в следующем - при загрузке системы на стадии определения
>>> > оборудования
>>> > система очень долго грузится, около 2х минут, ...
>>> > Куда копать?
>>
>>> > [-- Вложение #2: dmesg.odt --]
>> Ну ладно хоть не .doc.
>>
>>> В сторону дисков?
>>>
>>> [ 1.771236] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00
>>> irq 14
>>> ...
>>> [ 22.816020] ata1: lost interrupt (Status 0x58)
>>> ...
>>> [ 52.816018] ata1: lost interrupt (Status 0x58)
>>> ...
>>> [ 83.816029] ata1: lost interrupt (Status 0x58)
>>> ...
>>> [ 113.816029] ata1: lost interrupt (Status 0x58)
>>> [ 113.829464] ata1: drained 1 bytes to clear DRQ.
>>> [ 113.829474] ata1.00: limiting speed to PIO4
>>> [ 113.842843] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
>>> frozen
>>> [ 113.856432] scsi 0:0:0:0: CDB: Inquiry: 12 00 00 00 60 00
>>> [ 113.870019] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0
>>> dma
>>> 96 in
>>> [ 113.870021] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask
>>> 0x4 (timeout)
>>> [ 113.897210] ata1.00: status: { DRDY }
>>> [ 118.948013] ata1: link is slow to respond, please be patient
>>> (ready=0)
>>> [ 122.432018] ata1: soft resetting link
>>> [ 122.624284] ata1.00: configured for PIO4
>>> [ 122.638546] ata1: EH complete
>>> [ 122.651744] scsi scan: 96 byte inquiry failed. Consider
>>> BLIST_INQUIRY_36 for this device
>>
>> В даннос случае это не диск, а DVD-привод, причём с интерфейсом PATA:
>>
>> [ 1.988379] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.01, max
>> UDMA/66
>>
>> Покажите ещё для сравнения dmesg с системы, загружающейся без таких
>> проблем.
>>
>
Подробная информация о списке рассылки community