[Comm] Ethernet controller Attansic 1063

[Vladimir Scherbaev]

Добрый вечер.

Имеется ноутбук Acer Extensa 5635. На него был установлен ALT Linux
Школьный Master.

После установки обнаружились проблемы с сетью.

lspci определяет сетевую карту как Ethernet controller Attansic dev. 1063.

Ядро 2.6.30-std-def-alt14

[root на comp-Dual-Core-CPU-596d79 ifaces]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:26:9E:59:6D:79
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:4294967198 errors:4294966708 dropped:4294967100
overruns:4294967198 frame:4294966806
          TX packets:4294967198 errors:4294966904 dropped:0
overruns:4294967198 carrier:4294967101
          collisions:4294966806 txqueuelen:1000
          RX bytes:4294967198 (3.9 GiB)  TX bytes:4294967198 (3.9 GiB)
          Interrupt:29

[root на comp-Dual-Core-CPU-596d79 ifaces]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN qlen 1000
    link/ether 00:26:9e:59:6d:79 brd ff:ff:ff:ff:ff:ff
3: wmaster0: <UP,LOWER_UP> mtu 0 qdisc pfifo_fast state UNKNOWN qlen 1000
    link/ieee802.11 0c:ee:e6:91:61:c8 brd 00:00:00:00:00:00
4: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
pfifo_fast state DOWN qlen 1000
    link/ether 0c:ee:e6:91:61:c8 brd ff:ff:ff:ff:ff:ff
5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
    link/ether 22:bb:7c:4b:ec:c3 brd ff:ff:ff:ff:ff:ff
6: vboxnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UNKNOWN qlen 1000
    link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff

dmesg:
[  125.315668] atl1c 0000:09:00.0: irq 29 for MSI/MSI-X
[  125.315813] atl1c 0000:09:00.0: atl1c: eth0 NIC Link is Up<1000
Mbps Full Duplex>


Как это исправить?

-- 
With Best Regards,
Vladimir Scherbaev