[Comm] изменение частоты процессора приводять к нестабильности wi-fi
Kharitonov A. Dmitry
=?iso-8859-1?q?kharpost_=CE=C1_rambler=2Eru?=
Пт Окт 24 07:05:25 MSD 2008
Roman V. Tutov пишет:
> В сообщении от Tuesday 21 October 2008 04:49:01 Kharitonov A. Dmitry
> написал(а):
>
>> Это вы показали случай, когда всё хорошо работает.
>> А теперь покажите, когда работает со сбоями
>>
>
> [root на eeepc900 acpi]# [root на eeepc900 acpi]# cpufreq-info
> cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
> Report errors and bugs to linux на brodo.de, please.
> analyzing CPU 0:
> driver: p4-clockmod
> CPUs which need to switch frequency at the same time: 0
> hardware limits: 113 MHz - 900 MHz
> available frequency steps: 113 MHz, 225 MHz, 338 MHz, 450 MHz, 563 MHz, 675
> MHz, 788 MHz, 900 MHz
> available cpufreq governors: ondemand, performance
> current policy: frequency should be within 300 MHz and 600 MHz.
> The governor "ondemand" may decide which speed to use
> within this range.
> current CPU frequency is 338 MHz (asserted by call to hardware).
>
> [root на eeepc900 acpi]# lsmod | grep ath
> ath5k 97792 0
> mac80211 177820 1 ath5k
> cfg80211 31368 2 ath5k,mac80211
> ath_pci 195756 0
> ath_rate_amrr 11524 0
> ath_rate_sample 18432 1
> ath_hal 283360 3 ath_pci,ath_rate_sample
> wlan 253808 9
> ath_pci,wlan_tkip,wlan_acl,wlan_wep,wlan_ccmp,ath_rate_amrr,ath_rate_sample,wlan_scan_sta
>
> [root на eeepc900 acpi]# dmesg | egrep "ath|wifi" | tail -25
> ath_hal: module license 'Proprietary' taints kernel.
> ath_hal: 0.10.2.2-ATHEROS (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112,
> RF2413, RF5413, RF2133, RF2425)
> ath_rate_sample: 1.2 (trunk)
> ath_rate_amrr: 0.1 (trunk)
> ath_pci: trunk
> MadWifi: ath_attach: Switching rfkill capability off
> MadWifi: ath_attach: Switching per-packet transmit power control off
> wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
> 36Mbps 48Mbps 54Mbps
> wifi0: H/W encryption support: WEP AES AES_CCM TKIP
> wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
> wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
> wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
> wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
> wifi0: ath_announce: Use hw queue 8 for CAB traffic
> wifi0: ath_announce: Use hw queue 9 for beacons
> ath_pci: wifi0: Atheros 5424/2424: mem=0xf8000000, irq=18
>
>
На эту карточку откликается сразу 2 драйвера: ath5k и ath_pci.
#echo "blacklist ath5k" > /etc/modprobe.d/ath5k
Должно помоч
Подробная информация о списке рассылки community