[Comm] Спящий режим - снова сбой.

Чт Окт 9 18:12:23 MSD 2008

Теперь уже без kaffeine :-(

Из серьезных приложений работала VirtualBox

Вот конец dmesg :
-------------------------------------------------
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Shrinking memory... done (101693 pages freed)
PM: Freed 406772 kbytes in 0.67 seconds (607.12 MB/s)
Suspending console(s)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
nsc-ircc 00:0a: disabled
ACPI handle has no context!
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:0f:06.3 disabled
ACPI handle has no context!
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:0f:06.2 disabled
ACPI handle has no context!
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:04:00.0 disabled
[fglrx] firegl_gps_setpowerdown .
ACPI: PCI interrupt for device 0000:01:00.0 disabled
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
ACPI: PCI interrupt for device 0000:00:1a.7 disabled
ACPI: PCI interrupt for device 0000:00:1a.1 disabled
ACPI: PCI interrupt for device 0000:00:1a.0 disabled
ACPI: Preparing to enter system sleep state S4
Disabling non-boot CPUs ...
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU0 attaching sched-domain:
 domain 0: span 00000001
  groups: 00000001
CPU1 is down
PM: Creating hibernation image:
PM: Need to copy 125852 pages
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling non-boot CPUs ...
CPU0 attaching NULL sched-domain.
SMP alternatives: switching to SMP code
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.25 BogoMIPS 
(lpj=7980503)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
CPU0 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000001 00000002
CPU1 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000002 00000001
CPU1 is up
Switched to high resolution mode on CPU 1
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.0 to 64
usb usb1: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.7 to 64
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 
100106, writing 100102)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb5: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 
20100f00, writing 20130f00)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 
2880001, writing 2880005)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 
2b00003, writing 2b00007)
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
[fglrx] firegl_gps_setpowerup .
PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, 
writing c0960000)
PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 
40100106, writing 40100506)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:0f:06.0 at offset f (was 
3c4010b, writing 5c0010b)
PM: Writing back config space on device 0000:0f:06.0 at offset 3 (was 
825110, writing 82a820)
PM: Writing back config space on device 0000:0f:06.0 at offset 1 (was 
2100107, writing 2100007)
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  
MMIO=[fc102000-fc1027ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
PM: Writing back config space on device 0000:0f:06.2 at offset f (was 
40701ff, writing 407010b)
PM: Writing back config space on device 0000:0f:06.2 at offset 4 (was 0, 
writing fc101000)
PM: Writing back config space on device 0000:0f:06.2 at offset 3 (was 
800000, writing 803910)
PM: Writing back config space on device 0000:0f:06.2 at offset 1 (was 
2100000, writing 2100106)
ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22
nsc-ircc 00:0a: activated
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
ata4: SATA link down (SStatus 0 SControl 0)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/33
ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
ata3.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't 
support DPO or FUA
sd 2:0:0:0: [sda] Starting disk
uvcvideo: Failed to query (1) UVC control 2 (unit 0) : -71 (exp. 26).
uvcvideo 6-1:1.1: resume error -5
ehci_hcd 0000:00:1a.7: HC died; cleaning up
Restarting tasks ... done.
usb 6-1: USB disconnect, address 2
wlan0: RX deauthentication from 00:1e:58:81:a9:fd (reason=6)
wlan0: deauthenticated
wlan0: authenticate with AP 00:1e:58:81:a9:fd
wlan0: RX authentication from 00:1e:58:81:a9:fd (alg=0 transaction=2 
status=0)
wlan0: authenticated
wlan0: associate with AP 00:1e:58:81:a9:fd
wlan0: RX ReassocResp from 00:1e:58:81:a9:fd (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:1e:58:81:a9:fd)
atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on 
isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf8 on 
isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on 
isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xf8 on 
isa0060/serio0).
atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Shrinking memory... done (258326 pages freed)
PM: Freed 1033304 kbytes in 8.92 seconds (115.84 MB/s)
Suspending console(s)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
nsc-ircc 00:0a: disabled
ACPI handle has no context!
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:0f:06.3 disabled
ACPI handle has no context!
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:0f:06.2 disabled
ACPI handle has no context!
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:04:00.0 disabled
[fglrx] firegl_gps_setpowerdown .
ACPI: PCI interrupt for device 0000:01:00.0 disabled
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
usb_hcd_pci_suspend(): ehci_pci_suspend+0x0/0xb0 [ehci_hcd]() returns -22
pci_device_suspend(): usb_hcd_pci_suspend+0x0/0x160 [usbcore]() returns -22
suspend_device(): pci_device_suspend+0x0/0x60() returns -22
Could not suspend device 0000:00:1a.7: error -22
PM: Writing back config space on device 0000:00:1b.0 at offset f (was 
100, writing 10b)
PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, 
writing fc400004)
PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, 
writing 10)
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 
100000, writing 100102)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 
2880001, writing 2880005)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 
2b00003, writing 2b00007)
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
[fglrx:KCL_enable_pat] *ERROR* Pat entry 2 is already configured
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
[fglrx] firegl_gps_setpowerup .
PCI: Enabling device 0000:04:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:04:00.0 at offset f (was 
100, writing 10b)
PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, 
writing f8000000)
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 
100002, writing 100106)
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
PM: Writing back config space on device 0000:0f:06.1 at offset f (was 
4020100, writing 402010b)
PM: Writing back config space on device 0000:0f:06.1 at offset 5 (was 0, 
writing fc104000)
PM: Writing back config space on device 0000:0f:06.1 at offset 4 (was 0, 
writing fc102000)
PM: Writing back config space on device 0000:0f:06.1 at offset 3 (was 
800000, writing 802010)
PM: Writing back config space on device 0000:0f:06.1 at offset 1 (was 
2100000, writing 2100116)
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  
MMIO=[fc102000-fc1027ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ata4: SATA link down (SStatus 0 SControl 0)
PM: Writing back config space on device 0000:0f:06.2 at offset f (was 
40701ff, writing 407010b)
PM: Writing back config space on device 0000:0f:06.2 at offset 4 (was 0, 
writing fc101000)
PM: Writing back config space on device 0000:0f:06.2 at offset 3 (was 
800000, writing 803910)
PM: Writing back config space on device 0000:0f:06.2 at offset 1 (was 
2100000, writing 2100106)
ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22
PM: Writing back config space on device 0000:0f:06.3 at offset f (was 
40701ff, writing 407010b)
PM: Writing back config space on device 0000:0f:06.3 at offset 4 (was 0, 
writing fc102800)
PM: Writing back config space on device 0000:0f:06.3 at offset 3 (was 
800000, writing 803910)
PM: Writing back config space on device 0000:0f:06.3 at offset 1 (was 
2100000, writing 2100106)
ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22
nsc-ircc 00:0a: activated
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
ata3.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
ata1.00: configured for UDMA/33
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't 
support DPO or FUA
sd 2:0:0:0: [sda] Starting disk
Restarting tasks ... done.
--------------------------------------------------------

Рецидивы прогрессируют, однако :-(