[Comm] SD cardreader в ноутбуке

[altlinuxuser]

lspci говорит следующее:
------------------------------------
0f:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia 
Card Reader (SD/MMC/MS/MS PRO/xD)
    Subsystem: Acer Incorporated [ALI] Unknown device 011f
    Flags: bus master, medium devsel, latency 57, IRQ 193
    Memory at fc101000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>

0f:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA 
Standard Compliant SD Host Controller
    Subsystem: Acer Incorporated [ALI] Unknown device 011f
    Flags: bus master, medium devsel, latency 57, IRQ 193
    Memory at fc102800 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>
-----------------------------------

В выводе dmesg ничего о самом контроллере не нашел, а CardBus, через 
который он подключен, фигурирует в следующих местах :

-----------------------------------
<...>
PCI: Bus 16, cardbus bridge: 0000:0f:06.0
  IO window: 00006000-000060ff
  IO window: 00006400-000064ff
  PREFETCH window: 88000000-89ffffff
  MEM window: 8c000000-8dffffff

<...>

Yenta: CardBus bridge found at 0000:0f:06.0 [1025:011f]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:0f:06.0, mfunc 0x01aa1b22, devctl 0x64
Yenta: ISA IRQ mask 0x0cf0, PCI irq 193
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#0f) from #10 to #13

<...>
-----------------------------------------------------------

Правильно ли я понимаю, что кардридер не завелся ?
Какие есть пути решения проблемы ?