[Comm] Не работает 3D

s-damir =?iso-8859-1?q?s-damir_=CE=C1_mail=2Eru?=
Пт Авг 29 12:45:01 MSD 2008


Andrey Rahmatullin пишет:
> On Fri, Aug 29, 2008 at 12:20:07PM +0600, s-damir wrote:
>   
>> Здравствуйте! У меня такая проблема. Видеокарта HD2600XT AGP. Драйвер 
>> стоит fglrx_glx 8.47.1-alt1. В описании к этому драйверу написано:
>>     
> А ядерный модуль той же версии стоит?
>
>   
А как это проверить?
Вот ещё xorg.0.log, если прояснит какие-нибудь детали:
X Window System Version 7.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 7.3
Build Operating System: Linux 2.6.18-ovz-smp-alt24 i686 
2.6.18-ovz-smp-alt24 i686
Current Operating System: Linux localhost.localdomain 
2.6.18-std-smp-alt7 #1 SMP Sat Aug 4 00:07:54 MSD 2007 i686
Build Date: 12 June 2008
    Before reporting problems, check https://bugzilla.altlinux.org/
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 29 11:19:20 2008
(==) Using config file: "/root/xorg.conf"
(==) ServerLayout "Minimal layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "SyncMaster|0"
(**) |   |-->Device "Card0|0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "ImPS/2 Generic Wheel Mouse|0"
(WW) No FontPath specified.  Using compiled-in default.
(==) FontPath set to:
    /usr/share/fonts/bitmap/misc/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/X11/modules"
(II) Loader magic: 0x81f0280
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.2
    X.Org XInput driver : 0.7
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"

(II) Loading /usr/lib/X11/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 1458,2570 rev 02 class 06,00,00 
hdr 00
(II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 
hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 1458,24d2 rev 02 class 0c,03,00 
hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 1458,24d2 rev 02 class 0c,03,00 
hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 1458,24d2 rev 02 class 0c,03,00 
hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 1458,24d2 rev 02 class 0c,03,00 
hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 1458,5006 rev 02 class 0c,03,20 
hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 
hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 
hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 1458,24d2 rev 02 class 01,01,8a 
hdr 00
(II) PCI: 00:1f:2: chip 8086,24d1 card 1458,24d1 rev 02 class 01,01,8f 
hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 1458,24d2 rev 02 class 0c,05,00 
hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 1458,a002 rev 02 class 04,01,00 
hdr 00
(II) PCI: 01:00:0: chip 1002,9586 card 174b,0028 rev 00 class 03,00,00 
hdr 00
(II) PCI: 02:08:0: chip 8086,1050 card 1458,3013 rev 02 class 02,00,00 
hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
    [0] -1    0    0x00009000 - 0x000090ff (0x100) IX[B]
    [1] -1    0    0x00009400 - 0x000094ff (0x100) IX[B]
    [2] -1    0    0x00009800 - 0x000098ff (0x100) IX[B]
    [3] -1    0    0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
    [0] -1    0    0xf8000000 - 0xf9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
    [0] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is 
cleared)
(II) Bus 2 I/O range:
    [0] -1    0    0x0000a000 - 0x0000a0ff (0x100) IX[B]
    [1] -1    0    0x0000a400 - 0x0000a4ff (0x100) IX[B]
    [2] -1    0    0x0000a800 - 0x0000a8ff (0x100) IX[B]
    [3] -1    0    0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
    [0] -1    0    0xfa000000 - 0xfa0fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9586) rev 0, 
Mem @ 0xe0000000/28, 0xf9000000/16, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
    [0] -1    0    0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1    0    0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 
0xefffffff......................
..................(II) LoadModule: "freetype"

(II) Loading /usr/lib/X11/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 7.3.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"

(II) Loading /usr/lib/X11/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 7.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "dri"

(II) Loading /usr/lib/X11/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 7.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"

(II) Loading /usr/lib/X11/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 7.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"

(II) Loading /usr/lib/X11/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 7.3.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "vesa"

(II) Loading /usr/lib/X11/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
    compiled for 7.3.0, module version = 1.3.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "kbd"

(II) Loading /usr/lib/X11/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 7.1.99.903, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"

(II) Loading /usr/lib/X11/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 7.1.99.902, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.6
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset vesa found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B].........
.........(II) Setting vga for screen 0.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/X11/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 7.3.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/X11/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 7.3.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.2
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
(II) VESA(0): VESA VBE OEM Software Rev: 10.59
(II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product: RV630
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(**) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level 2
(II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) VESA(0): VESA VBE DDC read successfully
(II) VESA(0): Manufacturer: SAM  Model: 10b  Serial#: 1196634423
(II) VESA(0): Year: 2004  Week: 41
(II) VESA(0): EDID Version: 1.3
(II) VESA(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) VESA(0): Sync:  Separate  Composite
(II) VESA(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) VESA(0): Gamma: 2.20
(II) VESA(0): DPMS capabilities: Off; RGB/Color Display
(II) VESA(0): First detailed timing is preferred mode
(II) VESA(0): redX: 0.633 redY: 0.351   greenX: 0.298 greenY: 0.592
(II) VESA(0): blueX: 0.143 blueY: 0.092   whiteX: 0.316 whiteY: 0.337
(II) VESA(0): Supported VESA Video Modes:
(II) VESA(0): 720x400 на 70Hz
(II) VESA(0): 640x480 на 60Hz
(II) VESA(0): 640x480 на 67Hz
(II) VESA(0): 640x480 на 72Hz
(II) VESA(0): 640x480 на 75Hz
(II) VESA(0): 800x600 на 56Hz
(II) VESA(0): 800x600 на 60Hz
(II) VESA(0): 800x600 на 72Hz
(II) VESA(0): 800x600 на 75Hz
(II) VESA(0): 832x624 на 75Hz
(II) VESA(0): 1024x768 на 60Hz
(II) VESA(0): 1024x768 на 70Hz
(II) VESA(0): 1024x768 на 75Hz
(II) VESA(0): 1280x1024 на 75Hz
(II) VESA(0): 1152x870 на 75Hz
(II) VESA(0): Manufacturer's mask: 0
(II) VESA(0): Supported Future Video Modes:
(II) VESA(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) VESA(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) VESA(0): Supported additional Video Mode:
(II) VESA(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
(II) VESA(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 
1688 h_border: 0
(II) VESA(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 
1066 v_border: 0
(II) VESA(0): Ranges: V min: 56  V max: 75 Hz, H min: 30  H max: 81 kHz, 
PixClock max 140 MHz
(II) VESA(0): Monitor name: SyncMaster
(II) VESA(0): Serial No: HDDXA02030
(II) VESA(0): EDID (in hex):
(II) VESA(0):     00ffffffffffff004c2d0b0137315347
(II) VESA(0):     290e01036c221b782a36a1a2594c9724
(II) VESA(0):     175156bfef808180714f010101010101
(II) VESA(0):     010101010101302a009851002a403070
(II) VESA(0):     1300520e1100001e000000fd00384b1e
(II) VESA(0):     510e000a202020202020000000fc0053
(II) VESA(0):     796e634d61737465720a2020000000ff
(II) VESA(0):     00484444584130323033300a202000bb
(II) VESA(0): Using hsync ranges from config file
(II) VESA(0): Using vrefresh ranges from config file
(II) VESA(0): Printing DDC gathered Modelines:
(II) VESA(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 
628 +hsync +vsync
(II) VESA(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 
625 +hsync +vsync
(II) VESA(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 
500 -hsync -vsync
(II) VESA(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 
520 -hsync -vsync
(II) VESA(0): Modeline "640x480"   30.24  640 704 768 864  480 483 486 
525 -hsync -vsync
(II) VESA(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 
525 -hsync -vsync
(II) VESA(0): Modeline "720x400"   28.32  720 738 846 900  400 412 414 
449 -hsync +vsync
(II) VESA(0): Modeline "1280x1024"  135.00  1280 1296 1440 1688  1024 
1025 1028 1066 +hsync +vsync
(II) VESA(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 
772 800 +hsync +vsync
(II) VESA(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 
777 806 -hsync -vsync
(II) VESA(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 
777 806 -hsync -vsync
(II) VESA(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 
667 -hsync -vsync
(II) VESA(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 
625 +hsync +vsync
(II) VESA(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 
666 +hsync +vsync
(II) VESA(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 
868 900 +hsync +vsync
(II) VESA(0): Modeline "1280x1024"  109.00  1280 1368 1496 1712  1024 
1027 1034 1063 -hsync +vsync
(II) VESA(0): Modeline "1152x864"  104.00  1152 1224 1344 1536  864 867 
871 905 -hsync +vsync
(II) VESA(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 
1025 1028 1066 +hsync +vsync
(II) VESA(0): Searching for matching VESA mode(s):.................
..................(II) VESA(0): Total Memory: 256 64KB banks (16384kB)
(II) VESA(0): SyncMaster|0: Using hsync range of 30.00-81.00 kHz
(II) VESA(0): SyncMaster|0: Using vrefresh range of 56.00-75.00 Hz
(II) VESA(0): Not using mode "832x624" (no mode of this name)
(II) VESA(0): Not using built-in mode "1400x1050" (width too large for 
virtual size)
(--) VESA(0): Virtual size is 1280x1024 (pitch 1280)
(**) VESA(0): *Built-in mode "1280x1024"
(**) VESA(0): *Built-in mode "1152x864"
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "720x400"
(**) VESA(0): *Built-in mode "640x480"
(**) VESA(0):  Built-in mode "1280x1024"
(**) VESA(0): Display dimensions: (340, 270) mm
(**) VESA(0): DPI set to (95, 96)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1280x1024" (166)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1152x864" (156)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1024x768" (123)
(II) VESA(0): Attempting to use 72Hz refresh for mode "800x600" (122)
(II) VESA(0): Attempting to use 70Hz refresh for mode "720x400" (136)
(II) VESA(0): Attempting to use 73Hz refresh for mode "640x480" (121)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1280x1024" (124)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"

(II) Loading /usr/lib/X11/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
    compiled for 7.3.0, module version = 1.1.0
    ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/X11/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 7.3.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0xfa000000 - 0xfa000fff (0x1000) MX[B]
    [5] -1    0    0xfa102000 - 0xfa1020ff (0x100) MX[B]
    [6] -1    0    0xfa101000 - 0xfa1011ff (0x200) MX[B]
    [7] -1    0    0x88000000 - 0x880003ff (0x400) MX[B]
    [8] -1    0    0xfa100000 - 0xfa1003ff (0x400) MX[B]
    [9] -1    0    0xf0000000 - 0xefffffff (0x0) MX[B]O
    [10] -1    0    0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
    [11] -1    0    0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
    [12] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B]
    [13] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [14] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B]
    [15] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -1    0    0x00000000 - 0x000000ff (0x100) IX[B]
    [17] -1    0    0x0000a000 - 0x0000a03f (0x40) IX[B]
    [18] -1    0    0x0000dc00 - 0x0000dc3f (0x40) IX[B]
    [19] -1    0    0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [20] -1    0    0x00001400 - 0x0000141f (0x20) IX[B]
    [21] -1    0    0x0000d000 - 0x0000d00f (0x10) IX[B]
    [22] -1    0    0x0000cc00 - 0x0000cc03 (0x4) IX[B]
    [23] -1    0    0x0000c800 - 0x0000c807 (0x8) IX[B]
    [24] -1    0    0x0000c400 - 0x0000c403 (0x4) IX[B]
    [25] -1    0    0x0000c000 - 0x0000c007 (0x8) IX[B]
    [26] -1    0    0x0000f000 - 0x0000f00f (0x10) IX[B]
    [27] -1    0    0x0000b800 - 0x0000b81f (0x20) IX[B]
    [28] -1    0    0x0000b400 - 0x0000b41f (0x20) IX[B]
    [29] -1    0    0x0000b000 - 0x0000b01f (0x20) IX[B]
    [30] -1    0    0x0000bc00 - 0x0000bc1f (0x20) IX[B]
    [31] -1    0    0x00009000 - 0x000090ff (0x100) IX[B](B)
    [32] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B]
    [33] 0    0    0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Reloading /usr/lib/X11/modules//libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
(II) VESA(0): VESA VBE OEM Software Rev: 10.59
(II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product: RV630
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(==) VESA(0): Write-combining range (0xe0000000,0x1000000)
(II) VESA(0): virtual address = 0xb6b4c000,
    physical address = 0xe0000000, size = 16777216
(II) VESA(0): VBESetVBEMode failed...Tried again without customized values.
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"

(II) Loading /usr/lib/X11/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
    compiled for 7.3.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "IMPS/2"
(**) ImPS/2 Generic Wheel Mouse|0: Device: "/dev/input/mice"
(**) ImPS/2 Generic Wheel Mouse|0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) ImPS/2 Generic Wheel Mouse|0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) ImPS/2 Generic Wheel Mouse|0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) ImPS/2 Generic Wheel Mouse|0: ZAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse|0: Buttons: 9
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse|0" 
(type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) ImPS/2 Generic Wheel Mouse|0: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button



Подробная информация о списке рассылки community