[Comm] Compact install help need
Igor Siolovyov
=?iso-8859-1?q?gosha_=CE=C1_anti=2Esu?=
Вт Апр 3 19:40:43 MSD 2007
On Tue, 27 Mar 2007 20:48:21 +0400
Sergey Vlasov <vsu на altlinux.ru> wrote:
> On Tue, Mar 27, 2007 at 10:16:28PM +0600, Igor Solovyov wrote:
> > Машинка самая банальная:
> > Сeleron-2,6 (775 сокет)
> > мама GA-8I865GMKF-775
>
> Google такую модель не знает - вероятно, где-то опечатка.
>
> > 1 гиг оперативки,
> > винт - SATA (какой-то там WD на 160 гиг) - /dev/sda
> > NEC DVDRW ND-3540A - ну как бы по идее должен быть /dev/hdc (второй IDE, мастер)
> [...]
> > dmesg упорно молчит про IDE и соответсвтенно CDROM-а нет как класса! :-(
>
> Тогда покажите этот вывод dmesg, а также pciscan -v.
Привожу:
=========================================================================
# dmesg
Linux version 2.6.12-std26-up-alt7 (builder на salto.malta.altlinux.ru) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Mon Dec 5 15:45:18 MSK 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003dff0000 (usable)
BIOS-e820: 000000003dff0000 - 000000003dff3000 (ACPI NVS)
BIOS-e820: 000000003dff3000 - 000000003e000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
95MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5020
On node 0 totalpages: 253936
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 24560 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 GBT ) @ 0x000f69a0
ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3dff3040
ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3dff30c0
ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3dff6c80
ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 3e000000 (gap: 3e000000:c0c00000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=linux-up ro root=807 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2667.570 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1003208k/1015744k available (1496k kernel code, 11924k reserved, 738k data, 184k init, 98240k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5275.64 BogoMIPS (lpj=2637824)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000651d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Celeron(R) CPU 2.66GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 457k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfafa0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
audit: initializing netlink socket (disabled)
audit(1175626173.486:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 10240k, total 32576k
vesafb: mode is 1280x1024x16, linelength=2560, pages=11
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3).
Console: switching to colour frame buffer device 160x61
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
ACPI wakeup devices:
PCI0 HUB0 USB0 USB1 USB2 USB3 USBE
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (romfs filesystem) readonly.
SCSI subsystem initialized
input: AT Translated Set 2 keyboard on isa0060/serio0
libata version 1.11 loaded.
ata_piix version 1.03
ata_piix: combined mode detected
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
ata1: dev 0 cfg 49:2f00 82:706b 83:7e61 84:4023 85:7068 86:3c41 87:4023 88:207f
ata1: dev 0 ATA, max UDMA/133, 321672960 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
Vendor: ATA Model: WDC WD1600YD-01N Rev: 10.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:101f
ata2: dev 0 ATAPI, max UDMA/66
ata2: dev 1 cfg 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 1 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
ata2: dev 1 configured for UDMA/33
scsi1 : ata_piix
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 184k freed
Executing init=/sbin/init
Real Time Clock Driver v1.12
Adding 1052216k swap on /dev/sda6. Priority:-1 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel на redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 22 (level, low) -> IRQ 22
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8180000
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
input.c: calling hotplug without a hotplug agent defined
input: PC Speaker
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
usb 1-4: device descriptor read/all, error -110
usb 1-4: new high speed USB device using ehci_hcd and address 3
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x2660
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
input.c: calling hotplug without a hotplug agent defined
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: Detected 32636K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
hw_random: RNG not detected
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 20
e100: eth0: e100_probe: addr 0xf8000000, irq 20, MAC addr 00:16:E6:60:47:FB
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (22 C)
[drm] Initialized drm 1.0.0 20040925
PCI: Unable to reserve mem region #1:8000000 на f0000000 for device 0000:00:02.0
mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x1000000
[drm] Initialized i915 1.2.0 20041217 on minor 0: Intel Corporation 82865G Integrated Graphics Controller
[drm] Used old pci detect: framebuffer loaded
mtrr: base(0xf0020000) is not aligned on a size(0x500000) boundary
mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x1000000
subfs 0.9
lp0: using parport0 (interrupt-driven).
lp0: console ready
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3).
bootsplash: status on console 5 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3).
bootsplash: status on console 11 changed to on
===================================================================================
# pciscan
Recommended driver Description
------------------ -----------
intel-agp Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [Host bridge]
intelfb Intel Corporation 82865G Integrated Graphics Controller [VGA compatible controller]
uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [UHCI USB Controller]
uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [UHCI USB Controller]
uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [UHCI USB Controller]
uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [UHCI USB Controller]
ehci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [EHCI USB Controller]
hw_random Intel Corporation 82801 PCI Bridge [PCI bridge Normal decode]
i8xx_tco Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [ISA bridge]
ata_piix Intel Corporation 82801EB (ICH5) SATA Controller [IDE interface storage controller]
i2c-i801 Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [SMBus]
snd-ens1371 Ensoniq 5880 AudioPCI [Multimedia audio controller]
e100 Intel Corporation 82801EB/ER (ICH5/ICH5R) integrated LAN Controller [Ethernet controller]
--
Best Regards
Igor Solovyov
Подробная информация о списке рассылки community