[Comm] Configuring DVB (eutelsat w3)

Aleksey E. Birukov =?iso-8859-1?q?birukov_=CE=C1_vladinfo=2Eru?=
Вт Окт 25 15:29:56 MSD 2005


Извините за оффтоп. Мне срочно нужна помощь по настройке DVB. Я написал письмо 
в службу поддрержки (opensky-support на broadsat.com) и на форум провайдера 
(http://forum.broadsat.com/), но мне пока не ответили. Надеюсь, что здесь 
найдутся знающие люди, готовые помочь.

Описываю, что я делал по шагам:
My steps: 
1. # cat sky2 
#!/bin/bash 
# sky2 

#V 1.3 - 15.05.2004 
#V 1.2 - 18.02.2004 
#Version 1.1 - 17.11.2003 
#V 1.0 - 13.11.2003 
#Whereis szap (tuner) program 
SZAP=/usr/bin/szap 
#Whereis dvbnet (DATA PID) program 
DVBNET=/usr/bin/dvbnet 
#Number of Channel 
CH=5 # Internet:11449:v:0:27500:0:0:2 
#Data 
PID=3011 # 3010, 3011, 3021 
#Device Number 
DEV_NAME=dvb0_0 
#IP address of DVB 
IP_ADDR=192.168.55.1 
#MAC Address 
MAC_ADDR=00:d0:d7:0e:7d:8D 
#Location of config file 
Conf_File=/etc/channels.conf 

case "$1" in 

start) 
#/sbin/ifconfig $DEV_NAME down 
#/sbin/rmmod skystar2 
#/sbin/rmmod mt312 
#/sbin/rmmod dvb-core 
# 
#/sbin/insmod dvb-core dvb_shutdown_timeout=0 
#/sbin/insmod mt312 
#/sbin/insmod skystar2 
#/sbin/insmod input 
#/sbin/ifconfig $DEV_NAME $IP_ADDR 
$DVBNET -p $PID 
$SZAP -c $Conf_File -n$CH -x 
/sbin/ifconfig $DEV_NAME $IP_ADDR 
/sbin/ifconfig $DEV_NAME hw ether $MAC_ADDR 
echo 0 > /proc/sys/net/ipv4/conf/dvb0_0/rp_filter 
;; 

stop) 
echo "Stopping Device" 
/sbin/ifconfig $DEV_NAME down 
$DVBNET -d 0 
#/sbin/rmmod skystar2 
#/sbin/rmmod mt312 
#/sbin/rmmod dvb-core 
;; 

status) 
echo "" 
echo "Device status" 
echo "" 
/sbin/ifconfig $DEV_NAME 
echo"" 
echo "Tune status" 
echo "" 
$SZAP -c $Conf_File -n$CH -x 
;; 

*) 
echo "Usage: `basename $0` {restart|stop|status}" 
exit 1 
;; 

esac 

2. # ./sky2 start 
DVB Network Interface Manager 
Version 1.1.0-TVF (Build Sun Aug 14 18:57:12 2005) 
Copyright (C) 2003, TV Files S.p.A 

Device: /dev/dvb/adapter0/net0 
Status: device dvb0_0 for pid 3011 created successfully. 
reading channels from file '/etc/channels.conf' 
zapping to 5 'Internet': 
sat 0, frequency = 11449 MHz V, symbolrate 27500000, vpid = 0x0000, apid = 
0x0000 
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' 
status 01 | signal bd30 | snr 71fd | ber 00000006 | unc 00000000 | 
status 1f | signal bd77 | snr c37b | ber 000000a6 | unc 00000000 | FE_HAS_LOCK 

3. # ifconfig 
dvb0_0 Link encap:Ethernet HWaddr 00:D0:D7:0E:7D:8D 
inet addr:192.168.55.1 Bcast:192.168.55.255 Mask:255.255.255.0 
UP BROADCAST RUNNING NOARP MULTICAST MTU:4096 Metric:1 
RX packets:0 errors:0 dropped:0 overruns:0 frame:0 
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 
collisions:0 txqueuelen:1000 
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) 
Base address:0xbc3 

eth0 Link encap:Ethernet HWaddr 00:80:48:25:26:55 
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 
RX packets:270 errors:0 dropped:0 overruns:0 frame:0 
TX packets:331 errors:0 dropped:0 overruns:0 carrier:0 
collisions:0 txqueuelen:1000 
RX bytes:33377 (32.5 KiB) TX bytes:38442 (37.5 KiB) 
Interrupt:10 Base address:0xe000 

eth1 Link encap:Ethernet HWaddr 00:80:48:25:16:0F 
inet addr:83.222.65.55 Bcast:83.222.65.63 Mask:255.255.255.240 
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 
RX packets:8544 errors:0 dropped:0 overruns:0 frame:0 
TX packets:7005 errors:0 dropped:0 overruns:0 carrier:0 
collisions:12 txqueuelen:1000 
RX bytes:2043717 (1.9 MiB) TX bytes:617327 (602.8 KiB) 
Interrupt:11 Base address:0xc000 

lo Link encap:Local Loopback 
inet addr:127.0.0.1 Mask:255.0.0.0 
UP LOOPBACK RUNNING MTU:16436 Metric:1 
RX packets:2166 errors:0 dropped:0 overruns:0 frame:0 
TX packets:2166 errors:0 dropped:0 overruns:0 carrier:0 
collisions:0 txqueuelen:0 
RX bytes:306622 (299.4 KiB) TX bytes:306622 (299.4 KiB) 

4. https://sdr.eutelsat.net/servlets/satlogin 
type login & passowrd 

5. see the page https://sdr.eutelsat.net/servlets/login-7e 

6. Configuring my browser 
proxy: 193.251.135.103 8080 

7. http://google.com 
-->> connection time aut! 

What is wrong? 

Some additional information for previous letter: 
1. $ telnet 193.251.135.103 8080 
Trying 193.251.135.103... 
telnet: connect to address 193.251.135.103: Connection timed out 

$ ping 193.251.135.103 
PING 193.251.135.103 (193.251.135.103) 56(84) bytes of data. 

--- 193.251.135.103 ping statistics --- 
37 packets transmitted, 0 received, 100% packet loss, time 36001ms 

P.S. $ telnet broadsat.com 80 
Trying 213.188.200.196... 
Connected to broadsat.com. 
Escape character is '^]'. 

# tcpdump -i dvb0_0 
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode 
listening on dvb0_0, link-type EN10MB (Ethernet), capture size 96 bytes 
(empty) 

# dvbtraffic 
(empty) 

# uname -a 
Linux localhost 2.6.12-wks26-up-alt4 #1 Tue Aug 9 14:06:25 MSD 2005 i686 
unknown unknown GNU/Linux

-- 
$respect



Подробная информация о списке рассылки community