[Comm] Проблема с Ethernet-картой

[Michael Holzman]

Уважаемое сообщество,

После нескольких месяцев работы отказалась подниматься Ethernet-карта.
Что делать?

Система: АЛК 2.3

Симптомы такие:
==> sysconfig <===
Nov 12 20:34:05 localhost kernel: 8139too Fast Ethernet driver 0.9.26
Nov 12 20:34:05 localhost kernel: 8139too: 00:09.0: region #1 not an
MMIO resource, aborting
Nov 12 20:34:05 localhost insmod:
/lib/modules/2.4.22-std-up-alt17/kernel/drivers/net/8139too.o:
init_module: No such device
Nov 12 20:34:05 localhost insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.  
    You may find more information in syslog or the output from dmesg
Nov 12 20:34:05 localhost insmod:
/lib/modules/2.4.22-std-up-alt17/kernel/drivers/net/8139too.o: insmod
eth1 failed
N

==> /etc/modules.conf <==
alias eth0 via-rhine
alias eth1 8139too

==> lspci <===
00:09.0 Non-VGA unclassified device: Realtek Semiconductor Co., Ltd. RTL-8139/81
39C/8139C+ (rev 04) (prog-if 20)
        Subsystem: Unknown device 0004:0000
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at <ignored>
        I/O ports at <ignored>
        Memory at <ignored> (64-bit, non-prefetchable)
        Memory at <ignored> (64-bit, non-prefetchable)
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [04] #47 [8290]

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
        Subsystem: Giga-byte Technology: Unknown device e000
        Flags: bus master, medium devsel, latency 32, IRQ 23
        I/O ports at ec00 [size=256]
        Memory at df001000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [40] Power Management version 2


--
Regards,
    Michael Holzman