Re[5]: [Comm] Дрова NVIDIA и разрешение монитора
Александр Попичев
=?iso-8859-1?q?22468_=CE=C1_mail=2Eru?=
Чт Мар 11 12:11:18 MSK 2004
Здравствуйте, Evgeny.
Вы писали 11 марта 2004 г., 9:23:52:
EY>> Есть софтина под M$, называется PowerStrip, при нужных настройках:
Что такое M$?
EY>> 1) Идем в меню "Профили дисплея" --> "Настроить..."
EY> 1.1) Жмем длиннющую кнопку "Дополнительные параметры..."
EY>> 2) правее кнопок "Ок" и "Отмена" есть еще "Скопировать параметры в
EY>> буфер обмена", жмакаем.
EY>> 3) Открываем файл и вставляем, получим что-то типа:
EY>> PowerStrip timing parameters:
EY>> 1024x768=1024,64,96,192,768,1,3,36,94498,2048
EY>> Generic timing details for 1024x768:
EY>> HFP=64 HSW=96 HBP=192 kHz=69 VFP=1 VSW=3 VBP=36 Hz=85
EY>> Linux modeline parameters:
EY>> "1024x768" 94,498 1024 1088 1184 1376 768 769 772 808 +hsync +vsync
Все так и сделал, вставил последнюю строку в файлик...
Было так:-------------------------------------------------------------
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "monitor1"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-85
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Стало так:------------------------------------------------------------
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "monitor1"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-85
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x768" 113,303 1024 1112 1224 1392 768 769 772 814 -hsync +vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
-------------------------------------------------------------------------
При перезагрузке Х не загрузились.... При попытке загрузить из консоли
- был сгенерирован такой лог: -----------------------------------------
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86 на XFree86.Org and patches submitted
to fixes на XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1 (ALT Linux build: 4.3.0-alt12)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.22-vs-smp-alt17.1 i686 [ELF]
Build Date: 28 February 2004
Build Host: penalty.malta.altlinux.ru
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.22-std-up-alt17 (builder на mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt6)) #1 Wed Feb 4 22:52:03 MSK 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Mar 11 10:52:46 2004
(==) Using config file: "/etc/X11/XF86Config"
Parse warning on line 74 of section Keyboard in file /etc/X11/XF86Config
Ignoring obsolete keyword "LeftAlt".
Parse error on line 74 of section Keyboard in file /etc/X11/XF86Config
"Meta" is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error from xf86HandleConfigFile()
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86 на packages.altlinux.org.
EY>> 4) Визжым от вострога!
Пока нет восторга... :((
Помогите, пожалуйста, разобраться
--
С уважением,
Александр mailto:22468 на mail.ru
Подробная информация о списке рассылки community