[Comm] Mgetty. cannot get TIO: Input/output error

[unix9]

Приветствую всех!
Я тут установил модем на сервер, и вот такая фигня происходит при попытке дозовониться. Может кто знает в чем дело, вот лог.
03/05 16:38:46 yS1  mgetty: experimental test release 1.1.28-Jan10
03/05 16:38:46 yS1  check for lockfiles
03/05 16:38:46 yS1   checklock: no active process has lock, will remove
03/05 16:38:46 yS1  locking the line
03/05 16:38:46 yS1   makelock(ttyS1) called
03/05 16:38:46 yS1   do_makelock: lock='/var/lock/serial/LCK..ttyS1'
03/05 16:38:46 yS1   lock made
03/05 16:38:46 yS1   tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
03/05 16:38:46 yS1  WARNING: DCD line still active, check modem settings (AT&Dx)
03/05 16:38:46 yS1  lowering DTR to reset Modem
03/05 16:38:47 yS1  TIOCMBIS failed: Input/output error
03/05 16:38:47 yS1  cannot turn off soft carrier: Input/output error
03/05 16:38:47 yS1  tcgetattr failed: Input/output error
03/05 16:38:47 yS1  cannot get TIO: Input/output error
03/05 16:38:47 yS1  mg_init_device failed, trying again
03/05 16:38:47 yS1   tio_get_rs232_lines: status: RTS CTS DSR DTR
03/05 16:38:47 yS1  lowering DTR to reset Modem
03/05 16:38:47 yS1   tss: set speed to 57600 (10001)
03/05 16:38:47 yS1   tio_set_flow_control( HARD )
03/05 16:38:47 yS1   waiting for line to clear (VTIME), read:
03/05 16:38:47 yS1  send: \dATQ0V1H0[0d]
03/05 16:38:48 yS1  waiting for ``OK''
03/05 16:38:48 yS1   got:
03/05 16:39:08 yS1  timeout in chat script, waiting for `OK'
03/05 16:39:08 yS1  init chat timed out, trying force-init-chat
03/05 16:39:08 yS1  send: \d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0d]
03/05 16:39:12 yS1  waiting for ``OK''
03/05 16:39:12 yS1   got: [10][03]+++[0d]
03/05 16:39:12 yS1    CND: __+++ATQ0V1H0[0d]
03/05 16:39:12 yS1    CND: ATQ0V1H0[0d][0a]OK ** found **
03/05 16:39:12 yS1   force-init succeeded, retrying init-chat
03/05 16:39:12 yS1   waiting for line to clear (VTIME), read: [0d][0a]
03/05 16:39:12 yS1  send: \dATQ0V1H0[0d]
03/05 16:39:13 yS1  waiting for ``OK''
03/05 16:39:13 yS1   got: ATQ0V1H0[0d]
03/05 16:39:13 yS1    CND: OKATQ0V1H0[0d][0a]OK ** found **
03/05 16:39:13 yS1  send: ATS0=0Q0&D3&C1[0d]
03/05 16:39:13 yS1  waiting for ``OK''
03/05 16:39:13 yS1   got: [0d]
03/05 16:39:13 yS1    CND: OK[0a]ATS0=0Q0&D3&C1[0d]
03/05 16:39:13 yS1    CND: ATS0=0Q0&D3&C1[0d][0a]OK ** found **
03/05 16:39:13 yS1   waiting for line to clear (VTIME), read: [0d][0a]
03/05 16:39:14 yS1   removing lock file
03/05 16:39:14 yS1  waiting...