[Comm] wvdialer & SE T610

[Evgeny Yugov]

Приветствую.

Вот решил мобилку запинать, по наитию поставил wvdial, хвалили больно...
Воткнул мобилку и набрал:
[john на yugov john]$ sudo wvdialconf /etc/wvdial.conf
Scanning your serial ports for a modem.

Port Scan<*1>: LT0  
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S2   S3   S4   S5   S6   S7   S8   
Port Scan<*1>: S9   S10  S11  S12  S13  S14  S15  S16  
Port Scan<*1>: S17  S18  S19  S20  S21  S22  S23  S24  
Port Scan<*1>: S25  S26  S27  S28  S29  S30  S31  SA0  
Port Scan<*1>: SA1  SA2  SC0  SC1  SC2  SC3  SI0  SI1  
Port Scan<*1>: SI2  SI3  SI4  SI5  SI6  SI7  SI8  SI9  
Port Scan<*1>: SI10 SI11 SI12 SI13 SI14 SI15 SL0  SR0  
Port Scan<*1>: SR1  SR2  SR3  SR4  SR5  SR6  SR7  SR8  
Port Scan<*1>: SR9  SR10 SR11 SR12 SR13 SR14 SR15 SR16 
Port Scan<*1>: SR17 SR18 SR19 SR20 SR21 SR22 SR23 SR24 
Port Scan<*1>: SR25 SR26 SR27 SR28 SR29 SR30 SR31 SR256 
Port Scan<*1>: SR257 SR258 SR259 SR260 SR261 SR262 SR263 SR264 
Port Scan<*1>: SR265 SR266 SR267 SR268 SR269 SR270 SR271 SR272 
Port Scan<*1>: SR273 SR274 SR275 SR276 SR277 SR278 SR279 SR280 
Port Scan<*1>: SR281 SR282 SR283 SR284 SR285 SR286 SR287 
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- T610 series
ttyUSB0<*1>: Speed 4800: AT -- OK
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Speed 19200: AT -- OK
ttyUSB0<*1>: Speed 38400: AT -- OK
ttyUSB0<*1>: Speed 57600: AT -- OK
ttyUSB0<*1>: Speed 115200: AT -- OK
ttyUSB0<*1>: Speed 230400: AT -- OK
ttyUSB0<*1>: Speed 460800: AT -- ATц
ttyUSB0<*1>: Speed 460800: AT -- ERROR
ttyUSB0<*1>: Speed 460800: AT -- ATц
ttyUSB0<*1>: Max speed is 230400; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 --
│└┴@@*[10]╓(6╓[15]NOH@@j[13]╓[02] ttyUSB0<*1>: and failed too at 115200,
giving up. Port Scan<*1>: USB1 
Port Scan<*1>: USB2 USB3 USB4 USB5 USB6 USB7 USB8 USB9 
Port Scan<*1>: USB10 USB11 USB12 USB13 USB14 USB15 
ircomm0<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm1<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm2<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm3<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm4<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm5<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm6<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm7<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm8<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm9<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm10<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm11<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm12<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm13<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm14<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.
ircomm15<*1>: ATQ0 V1 E1 -- failed at 9600 and 19200 baud.


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wvdial/

If you still have problems, send mail to wvdial-list на lists.nit.ca.

Чего эт он не находит то?
Вроде ОКи получил... и без толку... :o/


-- 
2ldv: Дим, глянь плз на modutils, если тебя все устраивает - давай его в
Sisyphus, нам без него плохо ;-)
		-- rider in devel-kernel@