[Comm] 687231-xxx Intel PRO/100 Intelligent Server Adapt(TPE/MII) PILA8480 i960
Alexandr Rakhmanin
=?iso-8859-1?q?alex_=CE=C1_rscenter=2Eru?=
Вт Янв 20 07:51:36 MSK 2004
Привет.
Sergey Vlasov пишет:
> On Mon, Jan 19, 2004 at 03:03:13PM +0600, Alexandr Rakhmanin wrote:
>
>>Кто нибудь сабж взводил, если да то какие драйвера?
>>Ни в какую нехочет работать , ни с e100 ни с eepro100. Отключение acpi
>>& apic ничего не дает. Пробовал на 3ех ядрах, на 2ух системах i815 и
>>i865pe где она и планировалась встать. Главное что система нормально ее
>>распознает и правильно определяет прерывание с портами. Пока поставил
>>RTL8139 - без проблем.
> А что выдаёт по поводу этой карты lspci -vv, и что в /proc/ioports и
> /proc/iomem?
>
> modprobe eepro100 debug=0x7fffffff выдаёт какую-либо дополнительную
> информацию? Нужно смотреть именно вывод dmesg - по умолчанию
^^^^^^^^^^ - нет.
> syslogd не записывает отладочные сообщения в файл.
Вот вся информация, с е100 тоже самое, как заставить ядро выделять порты
I/O сетевке ? В параметрах модулей главное нечем порулить :/
----------------------------------------------------------------
Linux version 2.4.20-alt10-up (ldv на skif.office.altlinux.ru) (gcc version
2.96 20000731 (ALT Linux, build 2.96-alt3)) #1 Thu Sep 25 16:25:32 MSD 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
DMI 2.2 present.
40 structures occupying 1017 bytes.
DMI table at 0x000F0800.
BIOS Vendor: Award Software International, Inc.
BIOS Version: 6.00 PG
BIOS Release: 03/28/2002
System Vendor:
Product Name:
Version:
Serial Number:
Board Vendor:
Board Name: i815-W83627
Board Version:
Kernel command line: BOOT_IMAGE=2420-alt10-up ro root=306
Initializing CPU#0
Detected 1205.160 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2405.17 BogoMIPS
Memory: 256984k/262080k available (956k kernel code, 4708k reserved,
398k data, 116k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel(R) Celeron(TM) CPU 1200MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch на atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb1b0, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xd4000000, mapped to 0xd0800000, size 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:ede0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1024x768, 22471 bytes).
Console: switching to colour frame buffer device 106x34
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller on PCI bus 00 dev f9
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
hda: Maxtor 6Y040L0, ATA DISK drive
hdd: ATAPI-CD ROM-DRIVE-52MAX, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c02a80e4, I/O limit 4095Mb (mask 0xffffffff)
hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=4982/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 119k freed
VFS: Mounted root (romfs filesystem) readonly.
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 116k freed
Executing init=/sbin/init
Real Time Clock Driver v1.10e
Adding Swap: 248968k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: agpgart: Detected an Intel i815, but could not find the
secondary device. Assuming a non-integrated video card.
agpgart: Detected Intel i815 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw на saw.sw.com.sg> and others
eepro100: cannot reserve I/O ports
PCI: Found IRQ 5 for device 02:00.1
eepro100: cannot reserve I/O ports
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 02:03.0
PCI: Sharing IRQ 11 with 00:1f.2
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 Fast Ethernet at 0xd483e000, 00:50:fc:33:bd:9f, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
au88xx: Loading...
PCI: Found IRQ 9 for device 02:02.0
au88xx: Found vortex PCI device:
au88xx: id=0x0002
au88xx: bar0=0xdf000000
au88xx: irq=9
au88xx: Add device, audio=3, mixer=0, midi=2
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4191
Mon Dec 9 11:49:01 PST 2002
eth0: Setting 100mbps full-duplex based on auto-negotiated partner
ability 45e1.
eth0: Setting 100mbps full-duplex based on auto-negotiated partner
ability 45e1.
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw на saw.sw.com.sg> and others
eepro100: cannot reserve I/O ports
PCI: Found IRQ 5 for device 02:00.1
eepro100: cannot reserve I/O ports
eth0: Setting 100mbps full-duplex based on auto-negotiated partner
ability 45e1.
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw на saw.sw.com.sg> and others
eepro100: cannot reserve I/O ports
PCI: Found IRQ 5 for device 02:00.1
eepro100: cannot reserve I/O ports
---------------------------------------------------------------------------
lspci -vv
00:00.0 Class 0600: 8086:1130 (rev 04)
Subsystem: 1695:0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [88] #09 [e104]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
00:01.0 Class 0604: 8086:1131 (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: dc000000-ddffffff
Prefetchable memory behind bridge: d4000000-dbffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1e.0 Class 0604: 8086:244e (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: de000000-dfffffff
Prefetchable memory behind bridge: e0000000-e01fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 Class 0601: 8086:2440 (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 Class 0101: 8086:244b (rev 05) (prog-if 80 [Master])
Subsystem: 8086:2442
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: [virtual] I/O ports at 01f0
Region 1: [virtual] I/O ports at 03f4
Region 2: [virtual] I/O ports at 0170
Region 3: [virtual] I/O ports at 0374
Region 4: I/O ports at f000 [size=16]
00:1f.2 Class 0c03: 8086:2442 (rev 05)
Subsystem: 8086:2442
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d000 [size=32]
00:1f.3 Class 0c05: 8086:2443 (rev 05)
Subsystem: 8086:2442
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at 5000 [size=16]
00:1f.4 Class 0c03: 8086:2444 (rev 05)
Subsystem: 8086:2442
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at d400 [size=32]
01:00.0 Class 0300: 10de:0172 (rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d4000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at d8000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
02:00.0 Class 0604: 8086:5200 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
02:00.1 Class 0200: 8086:5201 (rev 03)
Subsystem: 8086:0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=2M]
02:02.0 Class 0401: 12eb:0002 (rev fe)
Subsystem: 1092:3003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 3000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=256K]
Region 1: I/O ports at c000 [size=8]
Region 2: I/O ports at c400 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:03.0 Class 0200: 10ec:8139 (rev 10)
Subsystem: 10ec:8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at df040000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
-------------------------------------------------------------------------------
/proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
5000-500f : Intel Corp. 82801BA/BAM SMBus
c000-c007 : Aureal Semiconductor Vortex 2
c000-c007 : au88xx
c400-c407 : Aureal Semiconductor Vortex 2
c400-c407 : au88xx
c800-c8ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
c800-c8ff : 8139too
d000-d01f : Intel Corp. 82801BA/BAM USB (Hub #1)
d400-d41f : Intel Corp. 82801BA/BAM USB (Hub #2)
f000-f00f : Intel Corp. 82801BA IDE U100
f000-f007 : ide0
f008-f00f : ide1
----------------------------------------------
/proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-001ef092 : Kernel code
001ef093-002529ff : Kernel data
0fff0000-0fff2fff : ACPI Non-volatile Storage
0fff3000-0fffffff : ACPI Tables
d0000000-d3ffffff : Intel Corp. 82815 815 Chipset Host Bridge and Memory
Controller Hub
d4000000-dbffffff : PCI Bus #01
d4000000-d7ffffff : nVidia Corporation NV17 [GeForce4 MX420]
d4000000-d7ffffff : vesafb
d8000000-d807ffff : nVidia Corporation NV17 [GeForce4 MX420]
dc000000-ddffffff : PCI Bus #01
dc000000-dcffffff : nVidia Corporation NV17 [GeForce4 MX420]
df000000-df03ffff : Aureal Semiconductor Vortex 2
df000000-df03ffff : au88xx
df040000-df0400ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
df040000-df0400ff : 8139too
e0000000-e01fffff : Intel Corp. EtherExpress PRO/100 Intelligent Server
ffb00000-ffffffff : reserved
-----------------------------------------------
filename: /lib/modules/2.4.20-alt10-up/kernel/drivers/net/eepro100.o
description: "Intel i82557/i82558/i82559 PCI EtherExpressPro driver"
author: "Maintainer: Andrey V. Savochkin <saw на saw.sw.com.sg>"
license: "GPL"
parm: debug int, description "debug level (0-6)"
parm: options int array (min = 1, max = 8), description "Bits
0-3: tranceiver type, bit 4: full duplex, bit 5: 100Mbps"
parm: full_duplex int array (min = 1, max = 8), description "full
duplex setting(s) (1)"
parm: congenb int, description "Enable congestion control (1)"
parm: txfifo int, description "Tx FIFO threshold in 4 byte units,
(0-15)"
parm: rxfifo int, description "Rx FIFO threshold in 4 byte units,
(0-15)"
parm: txdmacount int
parm: rxdmacount int
parm: rx_copybreak int, description "copy breakpoint for
copy-only-tiny-frames"
parm: max_interrupt_work int, description "maximum events handled
per interrupt"
parm: multicast_filter_limit int, description "maximum number of
filtered multicast addresses"
------------------------------------------------
filename: /lib/modules/2.4.20-alt10-up/kernel/drivers/net/e100/e100.o
description: "Intel(R) PRO/100 Network Driver"
author: "Intel Corporation, <linux.nics на intel.com>"
license: "GPL"
parm: TxDescriptors int array (min = 1, max = 16), description
"Number of transmit descriptors"
parm: RxDescriptors int array (min = 1, max = 16), description
"Number of receive descriptors"
parm: XsumRX int array (min = 1, max = 16), description "Disable
or enable Receive Checksum offload"
parm: e100_speed_duplex int array (min = 1, max = 16),
description "Speed and Duplex settings"
parm: ucode int array (min = 1, max = 16), description "Disable
or enable microcode loading"
parm: ber int array (min = 1, max = 16), description "Value for
the BER correction algorithm"
parm: flow_control int array (min = 1, max = 16), description
"Disable or enable Ethernet PAUSE frames processing"
parm: IntDelay int array (min = 1, max = 16), description "Value
for CPU saver's interrupt delay"
parm: BundleSmallFr int array (min = 1, max = 16), description
"Disable or enable interrupt bundling of small frames"
parm: BundleMax int array (min = 1, max = 16), description
"Maximum number for CPU saver's packet bundling"
parm: IFS int array (min = 1, max = 16), description "Disable or
enable the adaptive IFS algorithm"
Подробная информация о списке рассылки community