[Comm] Драйвера для Radion 9100

[Macabre]

Скачал с сайта (ati.com). Поставил, XF86Config настроил. Но при
выполнении /lib/modules/fglrx> ./make_install.sh :

- creating symlink
- recreating module dependency list
- trying a sample load of the kernel module
Warning: loading
/lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o will taint
the kernel: non-GPL license - Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
/lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o:
init_module: Operation not permitted
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o: insmod
/lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o failed
/lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o: insmod
fglrx failed
failed.

Подобное было и с загрузкой nvidia. Я думаю проблема в материнке. Epox
8rda на nforce2. 

вот что при загрузке:
>dmesg

Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 aperture @ 0xe0000000 64MB
[drm] Initialized radeon 1.7.0 20020828 on minor 0
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
Linux video capture interface: v1.00
[drm] Loading R200 Microcode
eth0: no IPv6 routers present
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be
loaded prior to any other DRM kernel module!
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be
loaded prior to any other DRM kernel module!

Что делать? Куда копать дальше?